Origin Acoustics D39 Manuel utilisateur

DIRECTOR COLLECTION

D39

D39 Installation Manual

Table of Contents

Introduction 1

Specifications 2

What’s Included 3

Tools & Items 3

Wire Recommendation 3

Wiring Options 4

About Speaker Wire 6

Installing the Wire 6

Wire Routing 7

Painting the Grille 8

Cutting the Hole 8

Installing the Bayonet Ring 9

Connecting the Wire 10

Installing the Speaker 10

Testing & Adjustments 11

Installing the Grille 11

Troubleshooting 12

Technical Assistance 13

Warranty 14

Return Process 15

Director Collection™ Manual

Thank you for purchasing the Director 39 In-Ceiling Speaker. At Origin Acoustics,

we take pride in providing you with a high quality product. All of Origin Acoustics’

speakers are designed to have excellent sound quality, longevity, and a simple

installation process.

This instruction booklet covers the necessary information for a smooth installa-

tion, including: the tools you will need, step-by-step instructions for installation,

troubleshooting tips for any errors that may occur, and all warranty information.

If for any reason you experience problems or if you have installation questions

please call us at (844) 674-4461. Hours of operation are 8:00am to 5:00pm (Pacific

Time), Monday through Friday.

Introduction

Director Collection™ Manual

Specifications

*All product specifications are subject to change. Please refer to the dealer portal for the latest information.

• Woofer: 3” Kevlar® • Diameter : 3 ” (100mm)

• Tweeter: 3/4” Silk DPSD Pivoting • Grille Diameter: 4 ” (110mm)

• Frequency Response: 100Hz-20kHz • Cutout Diameter: 3” (78mm)

• Power Handling: 50-100 Watts • Mounting Depth: 3 ” (100mm)

Model: D39 Part: SCD30900

Bracket:

BR3

* Both round and square grilles Included

Director Collection™ Manual

Speaker Bayonet Ring Grille Template

What’s Included

• Drywall Saw

• Speaker Wire

• Pencil

• Wire Stripper

• Measuring Tape

• Drill

• Drill Bit ⅛” (3mm)

• Stiff Wire

• Stud Finder

• Fish Tape

• Spray Paint

• Compressed Air

Tools & Items

The gauge of wire used can have an impact on the performance of your speakers.

Use a multi-stranded wiring designed for amplifier to speaker connections. Which

gauge to select depends on the length of wire to be used on any particular speak-

er. The longer your run is, the larger your wire size must be.

Wire Recommendation

Wire Length Wire Gauge

0 -100’ (0 - 30m) 16

50 - 150’ (15 - 45m) 14

Over 100’ (30m) 12

Installation Manual

• Woofer: 3” Kevlar® • Diameter : 3 ” (100mm)

• Tweeter: 3/4” Silk DPSD Pivoting • Grille Diameter: 4 ” (110mm)

• Frequency Response: 100Hz-20kHz • Cutout Diameter: 3” (78mm)

• Power Handling: 50-100 Watts • Mounting Depth: 3 ” (100mm)

Director Collection™ Manual

There are several ways to configure our Director Multi-Finish speakers. Our

preferred method is to use dedicated amplifiers for the speakers and subwoofers,

(such as our SubA150 and A2150) However, this system is designed to be easily

run o of a single amplifier as well. Here are a few options:

Wiring Options

With 4- Ohm stable amplifiers, you can use up to four Director Multi-Finish

Speakers per channel. If you’re using the Origin DSUB6 with the D39 speakers we

recommend our SubA150 or SubA500 for the subwoofer.

2CH Amplifier + Sub Amplifier: 4 - 8 Director

Multi-Finish Speakers & 1 - 2 Subwoofers

Subwoofer Amp

2 Channel Amp

Director Collection™ Manual

2 Channel Amp

For a setup with four speakers and one woofer, a two channel amplifier can be

used. First, both amplifier outputs should be connected to the DSUB6 subwoofer’s

L/R inputs. From there the subwoofer has L/R outputs to connect to the D39

speakers. Each output can be connected up to 2 speakers in parallel (4 speakers

total plus the subwoofer).

2CH Amplifier:

4 D39 Speakers & 1 DSUB6 Subwoofer

Director Collection™ Manual

Strip ¼ to ½ inches (6 to 12 mm) of the

insulation o both ends of the wire. To

avoid stray strands, twist them at the

end. Connect the wire to the amplifier,

and make sure the wire connected to

the le speaker output will be routed

to the le speaker, right output to right

speaker, etc.

1. Installing the Wire

You will need a wire that has at least two conductors; one that can be identified

as the positive and the other as the negative. All two conductor wires have some

means of identifying which conductor is which, but at times this identification

may be subtle. It’s crucial that you keep track of which wire you use for positive

(+) and negative (-). Typically if the wires are colored red and black, the red wire

is used for positive and the black wire is used for negative, but sometimes other

colors or patterns are used. You can choose whichever color of wire you want to

be positive and negative as long as you remain consistent throughout the install.

On both your amplifier and your speaker the connectors will be identified as red

for positive and black for negative. It is very important to look carefully at the

speaker wires and be certain that the same wire that is attached to the positive

connector in the amplifier is attached to the positive connector in the speaker.

About Speaker Wire

0.25 - 0.5”

(6 - 12mm)

Speaker

Wire

Director Collection™ Manual

Plan how you’ll route the wire to the desired speaker location. There are several

methods for routing the wire, and you may need to combine several of them.

Wire Routing

One option is to li up the carpet and

rout “tape wire” under the carpet.

Under the Carpet

The wire can be routed behind the

baseboard by cutting a groove out of

the back of the baseboard, or by buy-

ing special baseboard designed for

concealing wires.

Behind the Baseboard

When available, you can route the wire

through an attic or crawlspace.

Attic or Basement

When running wires through a wall, be

sure to avoid all obstacles such as AC

wiring, pipes, and ducts.

Through Walls

If these speakers are being installed in a new home during construction, the

installation process will be a bit dierent (although much simpler). For these

situations, it’s recommended you purchase a bracket. Instructions on how

to install the speakers are provided with the bracket, or can be found on our

website. Visit www.originacoustics.com for more information.

For New Construction

Director Collection™ Manual

When you’ve decided on the locations for all of the speakers, use the template

to trace a circle lightly in pencil where the hole should be. (If you don’t have a

3. Cutting the Hole

In some situations the speakers may look better if the color matched the walls,

ceiling, or trim in the room. This can be accomplished by painting the grille. The

grille must be painted with spray paint, and most hardware stores will mix a can

of paint to match whatever color you need. Before painting, carefully remove the

thin cloth on the underside of the grille. Lightly spray the front of the grille with the

paint from a distance, being careful not to plug any of the holes. Diluting the paint

with paint thinner will lessen the risk of filling any holes. If a hole gets plugged use

a can of compressed air to open it. Once the paint is dry, put the cloth back on

the grille.

2. Painting the Grille

Grille

Paint

Grille

Cloth

Grille

Autres manuels pour D39

Table des matières

Autres manuels Origin Acoustics Intervenants

Origin Acoustics

Origin Acoustics ThinFit TF 60 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics Season Outdoor OS 60 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics Director D62 DT/SUR Manuel utilisateur

Origin Acoustics

Origin Acoustics DSP2-200 Manuel utilisateur

Origin Acoustics

Origin Acoustics Acoustic Landscape Seasons Outdoor AS41SYS Manuel utilisateur

Origin Acoustics

Origin Acoustics SEASONS LANDSCAPE LS64 Manuel utilisateur

Origin Acoustics

Origin Acoustics Director D100 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics Crown CDi CDi1000 Manuel utilisateur

Origin Acoustics

Origin Acoustics D105EX Manuel utilisateur

Origin Acoustics

Origin Acoustics CIW60 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics MOS36K Manuel utilisateur

Origin Acoustics

Origin Acoustics ACOUSTIC LANDSCAPE AS51SYS Manuel utilisateur

Origin Acoustics

Origin Acoustics OUTDOOR OS80B Manuel utilisateur

Origin Acoustics

Origin Acoustics D65EX Manuel utilisateur

Origin Acoustics

Origin Acoustics EXPLORER THINFIT COLLECTION TF37EX Manuel utilisateur

Origin Acoustics

Origin Acoustics Director 100 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics COMPOSER C60 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics D60 Manuel utilisateur

Origin Acoustics

Origin Acoustics BANG & OLUFSEN Celestial BOC60 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics Seasons Outdoor Collection OSR85 Manuel utilisateur

Origin Acoustics

Origin Acoustics THINFIT COLLECTION TF37DT Manuel utilisateur

Origin Acoustics

Origin Acoustics Season Outdoor OS 60 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics Director 5 Series Manuel utilisateur

Origin Acoustics

Origin Acoustics PROFESSIONAL PC50 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur