orford EB Series Manuel
1
Vertical Display and Storage
EB Vertical Refrigerators
1 , 2 and 3 Door Vertical Refrigerators
Installation & Operating Instructions
EB20R-BEB20R-Sn-BEB30R-Sn-B
EB30R-B
EB36R-B
EB36R-Sn-B
EB45R-BEB45R-Sn-B
www.orford.com.au
1300 673 673
ORIGINAL INSTRUCTION
2
EB Series Bottom Mount Vertical Refrigerators
Installation and Operating Instructions
MAN0921 Rev.1 Sept 2021 edition.
Copyright © 2012. All rights reserved.
ORFORD REFRIGERATION, it’s subsidiaries are registered
trademarks of The Orford Group.
The Orford Group reserves the right to alter specifications
without notice.
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
Contact Addresses
Address:
Orford Refrigeration
382 South St
Harristown
Qld, 4350
Contact:
Phone: 07 46 345 278
Freecall: 1300 ORFORD(1300 673 673)
mail@orford.com.au
parts@orford.com.au
www.orford.com.au
3
Installation and Operating Manual
Please keep this manual in a safe place and refer to it and your
Warranty information should it be required.
Please fill out for future reference
This information will be required for Warranty Service work to be
authorized.
Purchased from:………………………………….
Delivery Docket:………………………………….
Product/Model:…………………………………..
Item No. ……………………………………………………..
Cabinet Serial Number:…………………………...
Commissioning Date:…………………………….
Place of Installation:………………………………………..
Owner of Cabinet:…………………………………………..
Owners Address:…………………………………………...
Owners Details: email:…………………….. Phone:……………………..
This manual should accompany this appliance if it is sold or
reinstalled in another location to ensure correct installation, use and
maintenance procedures are followed.
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
4
Table of Contents
Copyright 2012
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
Installation, Operation & Maintenance 1-21
Shipping Damage & Uncrating 5
Insurance 5
Warranty Information 5
Installation 5
Climate Class, Product Positioning 6
Dimension Drawings 6, 7, & 8
Safety Information 9
Electrical Requirements 9
To Isolate Power & Ventilation 10
Starting & Shelving 11 & 12
Energy Management System, Temperature Adjustment & Normal Operation&Alarms 13,14,15&16
Lighting, Manual Light Switches & Product Loading, 17
Condenser Cleaning 18 & 19
Replacing Lights 20 & 21
Operating Temperatures and Controls 13-23
Energy Management System 13, 14, 15
Temperature Adjustment 14
Problem Solving 22
Check Before Calling for a Machine Service 22
Problem Solving Checklist 22
Disposal & General Specifications 23
The information contained within is provided for the benefit of users of these products. Keep this
information in a safe place for future reference.
Product specifications enclosed are correct at time of publication. The Orford Group reserves the right to
change specifications, in our endeavours for continuous product improvement. The Orford Group cannot
be held responsible for errors or omissions in this document.
Page Pages
5
Shipping Damage & Uncrating
Remove upper packaging, leaving equipment on skid or shipping blocks until placed in
desired location. Check for damage so that correct claim forms can be filed. Removal of
upper packaging is necessary because damage may not be evident until equipment is
unpacked.
Insurance Is Your Responsibility
Inspect packaging and equipment for signs of damage in transit. Notify carrier
immediately regarding any damage. Everything leaving our factory is inspected and
checked before packing. Everything leaving the factory will be insured by us on your
behalf through the transport company’s insurance unless notified by you in writing to the
contrary. Transit damage is a matter between you and the Transport Company/Your
Insurer where you have arranged your own insurance.
NOTE: You should sign “Received Damaged” on the delivery note if applicable.
Warranty
All equipment is tested prior to dispatch from the Factory. After receipt from the
Transport Company and before delivery to the End User/Consumer, The Re-Seller
(Distributor) should test run the product. Our warranty covers both labor and parts
replacement for a period of 12 months (for non-corporate account customers as
determined by The Orford Group).
Orford Warranties do not cover service calls resulting from poor maintenance or
replacement of consumable part (s). Please refer to additional Warranty Information, or
copies of any contracts, supplied with this equipment for more details.
NOTE: Ensure you consult the Problem Solving Checklist before making a
Machine Service Call.
Installation
Remove equipment from skid or shipping blocks carefully. Do not use pinch bars on
finish. Protect finish with heavy cardboard or similar material. When in position,
equipment should be level and the weight evenly distributed over the base of the
cabinet, legs or castors. This is necessary for proper door alignment and drainage of the
evaporator condensate.
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
6
Cabinet Dimensions and Positioning Requirements
Position the refrigerator in accordance with its Climate Class.
Climate Class defines the climatic ambient conditions for which the cabinet is suited.
Refer table below.
The EB series are suited to the Climate Class as indicated on the cabinet identification
label. Refer table below.
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
Climate Class Ambient Temperature ºCAmbient Humidity % RHModels
540 40EB20R, EB30R, EB36R
430 55EB45R
EB20R-BEB20R-Sn-B
7
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
EB30R-BEB30R-Sn-B
EB36R-BEB36R-Sn-B
8
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
EB45R-B
EB45R-Sn-B
9
Safety Information
Do NOT use this appliance for other than its intended use.
Do NOT probe any openings.
Do NOT block or obstruct any openings or vents. (Refer ventilation)
Do NOT use double adaptors or extension leads.
Do NOT overload the shelving. (Refer Loading)
Do NOT store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
Allow adequate ventilation for the refrigeration unit. (Refer ventilation)
These appliances are not designed to be stable when moving. Exercise caution
when moving these appliances.
Be careful not to touch moving parts and hot surfaces.
Electrical Requirements
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
Orford Refrigeration does not authorize the use of flammable
refrigerants for servicing these refrigerators and freezers as
injury, loss of life and/or property may result.
Warning!
This appliance is for indoor use only.
Locating in a location exposed to rain may result in electrical
leakage and electrical shock.
Warning! Non qualified people must not attempt to work with electrical
connections or attempt to adapt cables or leads. If the supply
cord is damaged, the appliance must be repaired by an
authorized person.
Do NOT overload the power supply. Refer cabinet rating la-
bel for power requirements.
Make sure the cabinet wiring is connected to the correct source of power. Maximum
current draw is printed on the unit rating tag and where equipment can be plugged into
a General Purpose Outlet (GPO). The correct plug top for the required GPO will be
supplied as part of the equipment main power cord. Always check line voltage on
incoming power to make certain of proper voltage. The voltage should be within 5% of
the voltage printed on the unit rating tag.
10
To Isolate Power
It is recommended that power be isolated by switching power off and unplugging the
appliance from the power outlet.
If the power outlet isn’t accessible the power can be isolated by a green illuminated
switch located in the unit compartment at the bottom of the appliance.
a) Remove the unit cover
Lift unit cover off mounting dowels
Pull forward at the top
Lift cover off.
Reverse to replace.
b). Switch power off at the green rocker switch
Ventilation
These refrigerators require proper ventilation of the refrigeration unit (Motor).
The EB series refrigerators are ventilated at the front. The front ventilation grill must be
kept free on any obstructions at all times.
The EB series refrigerators will operate satisfactorily when ventilated only from the front
but is recommend that the cabinet be kept 50mm or greater from a rear wall for
maximum performance and energy saving.
Self-Contained equipment should only be installed in rooms that are well ventilated or
are of sufficient size to dissipate the heat generated by such equipment.
EB20R-B / EB20R-Sn-B / EB30R-B / EB30R-Sn-B / EB36R-B / EB36R-Sn-B / EB45R-B / EB45R-Sn-B
EB20R located on right hand side
Ce manuel convient aux modèles suivants
8
Table des matières
Autres manuels orford Réfrigérateur
