Oregon Scientific 16012 Manuel utilisateur

Watch n’ Learn User Manual

Dear Parents & Guardians, thank-you for buying Oregon

Scientific’s Watch N’ Learn. Using the latest technology

Oregon Scientific aims to develop unparalleled electronic

learning products that make learning more fun than ever

before!

interactive qualities that make an invaluable contribution to

childhood development.

With Watch N’ Learn a child can hear and see the time on

demand, together with an animation of an activity associated

with that!

When it comes to developing a child’s mind Oregon Scientific

products will help them to achieve their potential.

Instructions

Initial Activation

When purchased the Watch N’ Learn is in TRY ME mode

for demonstration purposes. Using the tip of a pencil, press

the RE-SET button located on the lower left side of the

watch. If the display or sound is weak and unclear, please

replace the batterys indicated (see “Fitting a new battery”).

The Watch N’Learn is now ready for use. Specific operations

and functions are listed below.

Setting the time

To set the time, press both LEFT and RIGHT buttons

simultaneously. Pressing them once selects the hour. Pressing

them again selects the minutes. When the

correct numbers are flashing use the LEFT

(-) and RIGHT (+) buttons to select the

correct time. When the time is set, press the

ON-DEMAND button to check your setting.

Once the time is set and there is no further user input, the

watch will revert to STAND-BY mode.

What time is it?

Press the ON-DEMAND button to hear the time. The Watch

N’ Learn also displays an animation of an activity according

to the time of day, e.g. eating, sleeping, etc.

The Alphabet

Press either the LEFT or RIGHT button (arrow

key) once to activate the alphabet teacher. A

letter is introduced, a word and supporting

animation follows. Use the LEFT and RIGHT

arrow keys to scroll through the alphabet.

The watch will show the animation of the

letter that you stop at. If there is no user input

within five seconds after the last

animation, the watch automatically

returns to the STAND-BY mode.

(Arrow)

Right Button

(Arrow)

Left Button

Reset On

Demand

Watch n’ Learn User Manual

Dear Parents & Guardians, thank-you for buying Oregon

Scientific’s Watch N’ Learn. Using the latest technology

Oregon Scientific aims to develop unparalleled electronic

learning products that make learning more fun than ever

before!

interactive qualities that make an invaluable contribution to

childhood development.

With Watch N’ Learn a child can hear and see the time on

demand, together with an animation of an activity associated

with that!

When it comes to developing a child’s mind Oregon Scientific

products will help them to achieve their potential.

Instructions

Initial Activation

When purchased the Watch N’ Learn is in TRY ME mode

for demonstration purposes. Using the tip of a pencil, press

the RE-SET button located on the lower left side of the

watch. If the display or sound is weak and unclear, please

replace the batterys indicated (see “Fitting a new battery”).

The Watch N’Learn is now ready for use. Specific operations

and functions are listed below.

Setting the time

To set the time, press both LEFT and RIGHT buttons

simultaneously. Pressing them once selects the hour. Pressing

them again selects the minutes. When the

correct numbers are flashing use the LEFT

(-) and RIGHT (+) buttons to select the

correct time. When the time is set, press the

ON-DEMAND button to check your setting.

Once the time is set and there is no further user input, the

watch will revert to STAND-BY mode.

What time is it?

Press the ON-DEMAND button to hear the time. The Watch

N’ Learn also displays an animation of an activity according

to the time of day, e.g. eating, sleeping, etc.

The Alphabet

Press either the LEFT or RIGHT button (arrow

key) once to activate the alphabet teacher. A

letter is introduced, a word and supporting

animation follows. Use the LEFT and RIGHT

arrow keys to scroll through the alphabet.

The watch will show the animation of the

letter that you stop at. If there is no user input

within five seconds after the last

animation, the watch automatically

returns to the STAND-BY mode.

(Arrow)

Right Button

(Arrow)

Left Button

Reset On

Demand

Watch n’ Learn User Manual

Dear Parents & Guardians, thank-you for buying Oregon

Scientific’s Watch N’ Learn. Using the latest technology

Oregon Scientific aims to develop unparalleled electronic

learning products that make learning more fun than ever

before!

interactive qualities that make an invaluable contribution to

childhood development.

With Watch N’ Learn a child can hear and see the time on

demand, together with an animation of an activity associated

with that!

When it comes to developing a child’s mind Oregon Scientific

products will help them to achieve their potential.

Instructions

Initial Activation

When purchased the Watch N’ Learn is in TRY ME mode

for demonstration purposes. Using the tip of a pencil, press

the RE-SET button located on the lower left side of the

watch. If the display or sound is weak and unclear, please

replace the batterys indicated (see “Fitting a new battery”).

The Watch N’Learn is now ready for use. Specific operations

and functions are listed below.

Setting the time

To set the time, press both LEFT and RIGHT buttons

simultaneously. Pressing them once selects the hour. Pressing

them again selects the minutes. When the

correct numbers are flashing use the LEFT

(-) and RIGHT (+) buttons to select the

correct time. When the time is set, press the

ON-DEMAND button to check your setting.

Once the time is set and there is no further user input, the

watch will revert to STAND-BY mode.

What time is it?

Press the ON-DEMAND button to hear the time. The Watch

N’ Learn also displays an animation of an activity according

to the time of day, e.g. eating, sleeping, etc.

The Alphabet

Press either the LEFT or RIGHT button (arrow

key) once to activate the alphabet teacher. A

letter is introduced, a word and supporting

animation follows. Use the LEFT and RIGHT

arrow keys to scroll through the alphabet.

The watch will show the animation of the

letter that you stop at. If there is no user input

within five seconds after the last

animation, the watch automatically

returns to the STAND-BY mode.

(Arrow)

Right Button

(Arrow)

Left Button

Reset On

Demand

Fitting a new battery

Caution!

Small + Loose parts included adult

assistance is necessary.

Use a small philips screwdriver to

remove the back of the watch. Replace

the battery with a new CR2032. Extra

care should be taken with the removal

of the backing. Beside the battery there

are two small springs that function as

speaker contacts. Take care as they are

small and loose. When replacing the

watch backing the springs need to be

standing upright. The backing fits

correctly in only one position.

Battery Notice

• Keep away from fire at all times.

•Remove batteries from the Watch N’Learn when it will not

be used for an extended period of time.

•The battery needs replacing, if the display becomes weak

or sound distorted.

•Non-rechargeable batteries are not to be recharged.

•Rechargeable batteries are to be removed from the toy before

being charged (if removable).

•Rechargeable batteries are only to be charged under adult

supervision (it removable).

•The supply terminals are not to be short-circuited.

Caution:

• Keep your Watch N’ Learn free from water, liquid toiletries

(cologne, perfume, hair liquids, etc), and moisture.

•Keep your Watch N’ Learn free from dirt, sand and other

small particles.

•Keep the unit clean by wiping it with a slightly damp cloth.

•Avoid long-term exposure to direct sunlight.

• Avoid extreme temperatures.

• Do not drop the unit on hard surfaces.

Consumer Services

Developing learning products is a responsibility that we at

Oregon Scientific take very seriously. We make every effort

to ensure the accuracy and appropriateness of the information

which forms the value of our products is of the highest quality.

However, errors can occur. It is important for you to know

that we stand behind our products and we encourage you to

call our Consumer Services Department at 1-800-853-8883

with any problems and/or suggestions that you might have.

Our service representatives will be happy to help you.

Notes:

Conforms to safety requirements of ASTM F963, EN71 Parts

1,2 & 3 and EN 50088.

In an effort to continually improve our products, the final

product may occasionally differ slightly from the diagrams

shown.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

• Reorientate or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician

for help.

This Class B digital apparatus complies with Canadian ICES-

003.

Cet appareil mumérique de la class B est conforme à la norme

NMB-003 du Canada.

086-000317-011

Fitting a new battery

Caution!

Small + Loose parts included adult

assistance is necessary.

Use a small philips screwdriver to

remove the back of the watch. Replace

the battery with a new CR2032. Extra

care should be taken with the removal

of the backing. Beside the battery there

are two small springs that function as

speaker contacts. Take care as they are

small and loose. When replacing the

watch backing the springs need to be

standing upright. The backing fits

correctly in only one position.

Battery Notice

• Keep away from fire at all times.

•Remove batteries from the Watch N’Learn when it will not

be used for an extended period of time.

•The battery needs replacing, if the display becomes weak

or sound distorted.

•Non-rechargeable batteries are not to be recharged.

•Rechargeable batteries are to be removed from the toy before

being charged (if removable).

•Rechargeable batteries are only to be charged under adult

supervision (it removable).

•The supply terminals are not to be short-circuited.

Caution:

• Keep your Watch N’ Learn free from water, liquid toiletries

(cologne, perfume, hair liquids, etc), and moisture.

•Keep your Watch N’ Learn free from dirt, sand and other

small particles.

•Keep the unit clean by wiping it with a slightly damp cloth.

•Avoid long-term exposure to direct sunlight.

• Avoid extreme temperatures.

• Do not drop the unit on hard surfaces.

Consumer Services

Developing learning products is a responsibility that we at

Oregon Scientific take very seriously. We make every effort

to ensure the accuracy and appropriateness of the information

which forms the value of our products is of the highest quality.

However, errors can occur. It is important for you to know

that we stand behind our products and we encourage you to

call our Consumer Services Department at 1-800-853-8883

with any problems and/or suggestions that you might have.

Our service representatives will be happy to help you.

Notes:

Conforms to safety requirements of ASTM F963, EN71 Parts

1,2 & 3 and EN 50088.

In an effort to continually improve our products, the final

product may occasionally differ slightly from the diagrams

shown.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

• Reorientate or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician

for help.

This Class B digital apparatus complies with Canadian ICES-

003.

Cet appareil mumérique de la class B est conforme à la norme

NMB-003 du Canada.

086-000317-011

Fitting a new battery

Caution!

Small + Loose parts included adult

assistance is necessary.

Use a small philips screwdriver to

remove the back of the watch. Replace

the battery with a new CR2032. Extra

care should be taken with the removal

of the backing. Beside the battery there

are two small springs that function as

speaker contacts. Take care as they are

small and loose. When replacing the

watch backing the springs need to be

standing upright. The backing fits

correctly in only one position.

Battery Notice

• Keep away from fire at all times.

•Remove batteries from the Watch N’Learn when it will not

be used for an extended period of time.

•The battery needs replacing, if the display becomes weak

or sound distorted.

•Non-rechargeable batteries are not to be recharged.

•Rechargeable batteries are to be removed from the toy before

being charged (if removable).

•Rechargeable batteries are only to be charged under adult

supervision (it removable).

•The supply terminals are not to be short-circuited.

Caution:

• Keep your Watch N’ Learn free from water, liquid toiletries

(cologne, perfume, hair liquids, etc), and moisture.

•Keep your Watch N’ Learn free from dirt, sand and other

small particles.

•Keep the unit clean by wiping it with a slightly damp cloth.

•Avoid long-term exposure to direct sunlight.

• Avoid extreme temperatures.

• Do not drop the unit on hard surfaces.

Consumer Services

Developing learning products is a responsibility that we at

Oregon Scientific take very seriously. We make every effort

to ensure the accuracy and appropriateness of the information

which forms the value of our products is of the highest quality.

However, errors can occur. It is important for you to know

that we stand behind our products and we encourage you to

call our Consumer Services Department at 1-800-853-8883

with any problems and/or suggestions that you might have.

Our service representatives will be happy to help you.

Notes:

Conforms to safety requirements of ASTM F963, EN71 Parts

1,2 & 3 and EN 50088.

In an effort to continually improve our products, the final

product may occasionally differ slightly from the diagrams

shown.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

• Reorientate or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician

for help.

This Class B digital apparatus complies with Canadian ICES-

003.

Cet appareil mumérique de la class B est conforme à la norme

NMB-003 du Canada.

086-000317-011

Fitting a new battery

Caution!

Small + Loose parts included adult

assistance is necessary.

Use a small philips screwdriver to

remove the back of the watch. Replace

the battery with a new CR2032. Extra

care should be taken with the removal

of the backing. Beside the battery there

are two small springs that function as

speaker contacts. Take care as they are

small and loose. When replacing the

watch backing the springs need to be

standing upright. The backing fits

correctly in only one position.

Battery Notice

• Keep away from fire at all times.

•Remove batteries from the Watch N’Learn when it will not

be used for an extended period of time.

•The battery needs replacing, if the display becomes weak

or sound distorted.

•Non-rechargeable batteries are not to be recharged.

•Rechargeable batteries are to be removed from the toy before

being charged (if removable).

•Rechargeable batteries are only to be charged under adult

supervision (it removable).

•The supply terminals are not to be short-circuited.

Caution:

• Keep your Watch N’ Learn free from water, liquid toiletries

(cologne, perfume, hair liquids, etc), and moisture.

•Keep your Watch N’ Learn free from dirt, sand and other

small particles.

•Keep the unit clean by wiping it with a slightly damp cloth.

•Avoid long-term exposure to direct sunlight.

• Avoid extreme temperatures.

• Do not drop the unit on hard surfaces.

Consumer Services

Developing learning products is a responsibility that we at

Oregon Scientific take very seriously. We make every effort

to ensure the accuracy and appropriateness of the information

which forms the value of our products is of the highest quality.

However, errors can occur. It is important for you to know

that we stand behind our products and we encourage you to

call our Consumer Services Department at 1-800-853-8883

with any problems and/or suggestions that you might have.

Our service representatives will be happy to help you.

Notes:

Conforms to safety requirements of ASTM F963, EN71 Parts

1,2 & 3 and EN 50088.

In an effort to continually improve our products, the final

product may occasionally differ slightly from the diagrams

shown.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

• Reorientate or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician

for help.

This Class B digital apparatus complies with Canadian ICES-

003.

Cet appareil mumérique de la class B est conforme à la norme

NMB-003 du Canada.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Oregon Scientific Jouet

Oregon Scientific

Oregon Scientific LS68 Manuel utilisateur

Oregon Scientific

Oregon Scientific 17078 Manuel utilisateur

Oregon Scientific

Oregon Scientific 17006 Manuel utilisateur

Oregon Scientific

Oregon Scientific 14894 Manuel utilisateur

Oregon Scientific

Oregon Scientific SMARTGLOBE 3 Manuel utilisateur

Oregon Scientific

Oregon Scientific Barbie B-Book Manuel utilisateur

Oregon Scientific

Oregon Scientific BARBIE LITTLE LEARNING LAPTOP Manuel utilisateur

Oregon Scientific

Oregon Scientific MeepadelicPurple Manuel utilisateur

Oregon Scientific

Oregon Scientific Barbie B-Brite Learning Laptop Manuel utilisateur

Oregon Scientific

Oregon Scientific School Writing Tablet 086-003875-034 Manuel utilisateur

Oregon Scientific

Oregon Scientific CF31 Manuel utilisateur

Oregon Scientific

Oregon Scientific IE28 Manuel utilisateur

Oregon Scientific

Oregon Scientific Accelerator Power Desktop Manuel utilisateur

Oregon Scientific

Oregon Scientific Accelerator Junior Laptop Manuel utilisateur

Oregon Scientific

Oregon Scientific Accelerator Power Desktop Manuel utilisateur

Oregon Scientific

Oregon Scientific 17015 Manuel utilisateur

Oregon Scientific

Oregon Scientific SMARTGLOBE Manuel utilisateur

Oregon Scientific

Oregon Scientific 18032 Manuel utilisateur

Oregon Scientific

Oregon Scientific SG18 Manuel utilisateur

Oregon Scientific

Oregon Scientific Batman Power Wing Laptop Manuel utilisateur

Oregon Scientific

Oregon Scientific Barbie B-Creative Education Center Electronic Learning... Manuel utilisateur

Oregon Scientific

Oregon Scientific HOT WHEELS FAST TRACK LAPTOP Manuel utilisateur

Oregon Scientific

Oregon Scientific Clone Trooper Junior Laptop Manuel utilisateur

Oregon Scientific

Oregon Scientific SUPERMAN LERNCOMPUTER DUO Manuel utilisateur

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

Canon

Canon PAPER CRAFT Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur