Oregon Scientific WL388 Manuel utilisateur

illumi Shine

Wake Up Clock

Model: WL388

User Manual

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock

to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING: SHOCK HAZARD –DO NO OPEN

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Caution marking is located at the bottom of apparatus.

TABLE OF CONTENTS

Introduction…………………………………………………………………….. 1

Overview

Front View…………………………………………………………………. 1

Rear View.…………………………………………………………………. 1

Getting Started

For First Time Use……………………………………………………….2

Connect to Power Source……………………………………………… 2

Location Selection………………………………………………………. 2

Clock

Manually Set Clock……………………………………………………… 2

Alarm…………………………………………………………………………….. 3

Soothing Nature Sound Player……………………………………………… 4

Sleep Timer……………………………………………………………………… 4

Sunrise Control…………………………………………..……………………..5

Reset…………………………………………………………………………….. 5

Connect with your Mobile Device

Getting Started………………………………………………………….. 6

Sleep Tracker……………………………………………………………. 6

Deregister from the Application………………………………………6

Troubleshooting………………………………………………………………. 7

Precaution……………………………………………………………………….7

Care and Maintenance………………………………………………………… 9

Smart Phone Compatibility………………………………………………….. 9

Specifications………………………………………………………………….. 9

About Oregon Scientific……………………………………………………… 9

EU-Declaration of Conformity………………………………………………. 10

FCC Statement…………………………………………………………………. 10

Declaration of Conformity………………………..…………………… 11

INTRODUCTION

Thank you for selecting our Oregon ScientificTM illumi Shine Wake Up Clock (model: WL388), which

logically combines an alarm function with a biological wake-up system, and can be remotely

controlled by your mobile device through Bluetooth 4.0 (BLE) via downloaded application.

This product is currently only compatible with the following mobile devices: iPhone 4S, iPhone 5, iPad

(3rd Generation), iPad (4th Generation), iPad Mini, iPod touch (5th Generation), which use this logo

to indicate reliable transmission linkage.

The principle of this product is based on the human body’s reaction to light. Our body clock is often

not in sync with the demands and rhythm of modern life, and is affected by external cues such as

sunlight. Light at dawn stimulates production of cortisol, which gets the body ready to work and wake

up. By simulating dawn, Oregon Scientific’s illumi Shine Wake Up Clock (WL388) prepares the body

to wake up by gradually increasing brightness to the set level in the 20 minutes prior to desired (set)

alarm time.

Wake energized for a better start on the day. Wake up as nature intended!

OVERVIEW

FRONT VIEW

REAR VIEW

1. : Alarm is On

2. :Soothing sound is playing

3. : Connected with mobile device through

Bluetooth

4. : Sleep timer is on

5. : Sunrise intensity control mode

6. Clock display

7. / : Morning/afternoon

8. Sunrise/sunset simulation

1. Auto dimmer sensor

2. : Toggle to set sleep timer; display the rest of sleep time

3. : Sun simulation on/off

4. : Turn on/off soothing sound; toggle to select soothing

sounds

5. : Decrease value of settings

6. RESET / SET CLOCK: Reset to default settings

7. : Enter alarm settings; view alarm status; confirm alarm

settings; alarm on/off; edit alarm setting

8. : Increase value of settings

9. Speaker

10.Power adapter socket

11.Stand slot

GETTING STARTED

FOR FIRST TIME USE

Inside the package is a plastic insert, for vertically

supporting the wake-up light on a table-top.

Insert the plastic stand into the slot at the rear of the light

with some pressure until you hear a click.

CONNECT TO POWER SOURCE

Put the plug into the wall socket and connect the jack to the unit.

1.Use only the power adapter supplied with this product. To order a replacement power adapter,

please contact our customer service.

2.The power adapter is intended to be correctly oriented in a vertical or floor mount position. The

prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or

cabinet outlet.

LOCATION SELECTION

Before selecting a location to place the unit, consider the following:

Ensure there is approximately 15 cm between unit and nearest object, such as walls or other

objects.

Ensure there is at least 40 cm of space above the top of the unit for ventilation purposes.

Ensure the distance between the unit and the wall socket is not longer than the power cord itself.

The main unit should not be exposed to wet conditions. No objects filled with liquid, such as

vases, should be placed on the main unit.

CLOCK

You can set the clock using the main unit as well as your mobile

device. However, the clock will be updated once the main unit is

connected with your mobile device through Bluetooth.

MANUALLY SET CLOCK

1.After plugging in the power adapter or pressing RESET on the main

unit, the main unit will display the connection ID and then

automatically enters clock setting mode.

2.The setting sequence is 12/24-hr format, then hour, then minute.

3.Press / to change the settings, or press and hold / to

rapidly change the settings.

4.Press any button ( / / / ) to confirm settings.

In step 1above, after pressing RESET, there is a screen

displaying a random four-digit connection ID, which is the password for

logging into the application with your mobile device. (See: Connect

with Your Mobile Device.) You can write down the four-digit number

for future use with other mobile devices.

ALARM

You can set 1 alarm on the main unit or 5 alarms through your mobile device, with different alarm

sounds.

To set the alarm:

1.Press and hold to enter setting mode.

2.The setting sequence is hour, minute, light ON/OFF and alarm sound.

3.Press / to adjust value

4.Press again to confirm setting.

Do not press any button to exit the setting.

In order to wake you gently, the sunrise and sound will start 20 minutes and 5 minutes,

relatively, before alarm time.

Please see the section Alarm with Soothing Sound for details on the alarm sound.

It is recommended that the main unit is not placed too far and not lower than your head while

in a sleeping position. Make sure the sunrise is not blocked by bed, duvet or pillow.

The brightness intensity of the sunrise follows the default setting.

To active/deactivate the alarm:

After setting the alarm, you can toggle to

active ( appears on the display screen), or

deactivate the alarm at any time.

OFF indicates the alarm function has been disabled.

To silence the alarm:

Once the alarm sounds each day, there will be 3 snooze times, at 8

minutes each. During the 8-minute snooze, the icon will flash for

indication.

Tap the top of the light to snooze until the 3rd snooze sound ends.

Press any key on the back panel to end the alarm (no snooze).

You can also silence the snooze sound through your mobile device. For more details, browse

the Information page of your mobile app.

SOOTHING NATURE SOUND PLAYER

You can use the wake-up light solely as a soothing sound player without the light function. You can

also set your desired sound volume.

To select a sound:

Toggle to activate the soothing sound function and automatically

play the sound. The number of the sound and show on the display

screen.

To turn off the sound:

Toggle until OFF shows on the display screen. The sound will stop and will disappear from

the display screen.

To adjust sound volume:

While playing a soothing sound, press / to select from three volume options:

L / M / H

SLEEP TIMER

You can set the sleep timer for the sunset function and soothing sound. The

sunset and sound will fade out to help your body ease into sleep.

To adjust the sleep timer setting:

1. Press and to set your preference settings.

2. Press to display the current sleep timer.

3.Toggle to display sleep timer options: OFF/30/60/90/120 min. If no button is pressed, the sleep

timer is activated.

4.Once the timer is activated, you can press any key at the back panel to switch off the sleep timer.

You can press to see the time left.

automatically disappears from the display screen if the sleep

timer reaches the set time.

Type

Sound Name

Renew

Relax

Bird Song

Ocean Waves

Raindrops

SUNRISE CONTROL

You can adjust the sunrise simulation to your desired

brightness intensity (1-20 level). For your convenience,

the brightness intensity will be stored in memory for the

next use.

To adjust the brightness intensity:

1.Press , the current brightness intensity displays and displays on the screen.

2.Press / to adjust brightness level. 1is the minimum brightness level and 20 is the maximum

brightness level.

RESET

Press RESET to return to the default settings.

CONNECT WITH YOUR MOBILE DEVICE

You can remotely set and control the wake-up clock through Bluetooth 4.0 using

your mobile device with the downloaded application from the Apple Store. To

quickly find the application, type ‘illumiShine’ as the keyword in the search engine.

After registering the application, your mobile device can also be used as a sleep

tracker for monitoring your sleep status.

A random four-digit connection ID is displayed on the screen

each time you reset the main unit. This number is a password

for registering the application and successfully connecting to the

light. For more details, see Manually Set Clock in your user

manual.

If the registration is unsuccessful, you cannot access the

application apart from the sleep tracker function. Please try to

reset the main unit to get a new four-digit password.

GETTING STARTED

After successfully registering the application, a helpful product

tour will appear.

You can tap at any time for the Information page to review

the Product Tour.

SLEEP TRACKER

With the sleep tracking feature and vibration detection by your mobile device, the

application can monitor your sleep status for analysis and improvement of your

sleep quality.

Your mobile device will need to charge the whole night. Please place the mobile

device face down beside your pillow, where it can detect your movements. For more

details, please browse the product tour of the application.

DEREGISTER FROM THE APPLICATION

You must deregister the current main unit from the application before registering another one.

To disconnect from your current application, follow the steps below:

1. Tap icon.

2. Tap Forget ID.

3. Tap RESET to erase the current ID memory in the application and the connection will be

interrupted immediately.

TROUBLESHOOTING

Problem

Possible

cause

Solutions/Remarks

The main unit does not work.

Power supply

Ensure plug has been firmly plugged into the

wall socket, not controlled by wall switch.

Ensure there is no power failure.

The main unit does not work.

Normal use

Press RESET at the rear of the main unit.

Check the connection with the mobile device.

When setting functions, the

unit does not respond.

Normal use

Connect the power adapter again or press

RESET at the rear of the main unit.

The appliance will then be reset to factory

default settings.

No sound when the alarm

goes on.

Alarm function

disabled

Ensure alarm icon is displayed on display

screen. If OFF is displayed, press ALARM to

enable.

Alarm did not activate today,

but it did yesterday

Alarm function

disabled

Ensure you select the correct alarm time

format, AM/PM.

Check the power connection for the possibility

of a power failure.

The sunrise wakes me too

late.

Location of

unit is not

suitable

Check if the main unit has been synchronized

by a mobile device which could update and

modify the alarm setting on your main unit.

It is recommended that the main unit is not

placed too far and not lower than your head

while in a sleeping position. Make sure the

sunrise is not blocked by bed, duvet or pillow.

Snooze does not work.

Proper

pressure

Press the top of the main unit where the

snooze is deactivated.

I cannot register main unit.

BLE issue

Check Bluetooth is activated on your mobile

device.

I cannot register a new main

unit.

Application

Download the correct application.

Password

Press RESET to get a new password, and

then input this four-digit number in the

application.

Deregistration

You need to deregister the previous main unit

from the application before registering a new

one. Get into Information in the application,

and tap Forget ID to deregister.

Sleep tracker cannot work

Location of

mobile device

It is recommended that your mobile device

should be placed near your upper body, such

as beside the pillow.

Uninterrupted

charging

Your mobile device needs to charge through

the power cable for the whole night.

PRECAUTIONS

DANGER

•Always follow instructions in Care and Maintenance when cleaning the unit.

•Do not immerse the unit in any liquid to avoid electric shock and / or fire hazard.

•Do not pull the electric cord to move the unit or to unplug.

•Do not part the unit when it is plugged to power supply or operating.

•Do not clean the power jack with water or any other liquid or a (flammable) solvent to avoid

electric shock and / or fire hazard.

•Do not plug or unplug the power cord with wet hands.

WARNING

•The unit cannot be operated for any use other than its intended purpose or beyond the technical

data specified. Improper use can be a danger to health or life.

•This unit is not intended for use by children or persons with diminished physical, sensory or

mental capabilities, unless they have received supervision or instruction concerning use of the

unit by a person responsible for their safety.

•Use only the adapter provided with the unit. Do not use the adapter for any other appliance.

•Do not operate the unit if you find any damage on the unit or the adapter. Switch off and unplug

the unit immediately if it is malfunctioning.

•This product is for indoor use only.

GENERAL

•If you share a bedroom, another person may unintentionally wake up from the light of this

product, even though this person is further away from the product. This is due to the differences

in light sensitivity between people.

•FOR DETAILS ON THE illumiShine app, PLEASE REFER TO THE USER MANUAL

MENTIONED IN THE APP.

•Images shown in this manual may differ from the actual display.

•The contents of this manual may not be reproduced without the permission of the manufacturer.

IMPORTANT

•Read this manual before first use and save it for future reference

•Consult your doctor before using this product if you have suffered or are suffering from serious

depression.

•This product is not for lighting lamp purpose, please use other lighting device for illumination

purpose

•The illumiShine app is a smart phone application to monitor and record your estimated sleep

pattern. The data is used to determine the optimal time to turn on the wake-up light. This unit is

not a precise instrument.

•This product cannot help to reduce the amount of sleep needed. It does not eliminate the need

for sleep.

•THIS PRODUCT AND ITS AFFILIATED SMART PHONE PROGRAM IS NOT A MEDICAL

DEVICE.

DOs

•Place the unit on a dry, stable, level, water-resistant surface with safe surroundings.

•Unplug the unit from mains power supply when not in use. If you are not going to use the unit for

a long time, see Care and Maintenance for storage suggestions.

•Children/pets should be supervised to ensure that they DO NOT play with the unit especially the

parts.

•When disposing of this product, ensure it is collected separately for special waste treatment.

DON’Ts

•DO NOT tamper with the unit’s internal components. This invalidates the warranty.

•DO NOT subject the unit to excessive force, shock, dust, temperature or humidity.

•DO NOT cover the unit with anything such as newspaper, curtains or clothing when operating.

•DO NOT immerse the unit in water. If you spill any liquid on it, dry it immediately with a soft, lint-

free cloth.

•DO NOT clean the unit with abrasive or corrosive materials.

•DO NOT dispose of old batteries as unsorted municipal waste. Collection of such waste

separately for special treatment is necessary.

NOTE The technical specifications for this product and the contents of the user manual are subjected

to change without notice.

CARE AND MAINTENANCE

•Always unplug the unit before cleaning.

•Do not immerse the unit in water. If you spill any liquid on it, dry it immediately with a soft, lint-

free cloth.

•Clean the unit regularly with a dry soft cloth to prevent accumulating dust.

SMART PHONE COMPATIBILITY

This product is also works with illumiShine app that can be installed on the following mobile phone

operation system.

Table des matières

Autres manuels Oregon Scientific Horloge

Oregon Scientific

Oregon Scientific RM329P Manuel utilisateur

Oregon Scientific

Oregon Scientific JMR868A Manuel utilisateur

Oregon Scientific

Oregon Scientific RA368P Manuel utilisateur

Oregon Scientific

Oregon Scientific rm318p Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR332ES Manuel utilisateur

Oregon Scientific

Oregon Scientific JM889NR Manuel utilisateur

Oregon Scientific

Oregon Scientific DP100 Manuel utilisateur

Oregon Scientific

Oregon Scientific RMB899P Manuel utilisateur

Oregon Scientific

Oregon Scientific RM962U Manuel utilisateur

Oregon Scientific

Oregon Scientific RM802 Manuel utilisateur

Oregon Scientific

Oregon Scientific BAR339P Manuel utilisateur

Oregon Scientific

Oregon Scientific WS902 Manuel utilisateur

Oregon Scientific

Oregon Scientific RAR601 Manuel utilisateur

Oregon Scientific

Oregon Scientific RM116E Manuel utilisateur

Oregon Scientific

Oregon Scientific MSR939 Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM612P Manuel utilisateur

Oregon Scientific

Oregon Scientific RM818PA Manuel utilisateur

Oregon Scientific

Oregon Scientific RM313P Manuel utilisateur

Oregon Scientific

Oregon Scientific RRM320P Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR682 Manuel utilisateur

Oregon Scientific

Oregon Scientific Slim Projection Clock RA368P Manuel utilisateur

Oregon Scientific

Oregon Scientific RRA320PNX Manuel utilisateur

Oregon Scientific

Oregon Scientific RM912E Manuel utilisateur

Oregon Scientific

Oregon Scientific RMR500ES Manuel utilisateur

Manuels Horloge populaires d'autres marques

Silicon Laboratories

Silicon Laboratories SI5324 Manuel utilisateur

Heathkit

Heathkit GC-1005 Manuel utilisateur

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuel utilisateur

ALGE-Timing

ALGE-Timing ASC3 Manuel utilisateur

Bodet

Bodet Profil 960 Manuel utilisateur

Nixie Clock

Nixie Clock Divergence Meter Manuel utilisateur

La Crosse Technology

La Crosse Technology WS-8256-AL Manuel utilisateur

Mini Gadgets

Mini Gadgets MCPro Manuel utilisateur

Casio

Casio TMR-200 Manuel utilisateur

Progetti

Progetti ILTEMPOSTRINGE Manuel

BVItech

BVItech BV-101 Manuel utilisateur

Progetti

Progetti KALIMERO Manuel

La Crosse Technology

La Crosse Technology WT-3141b Manuel

La Crosse Technology

La Crosse Technology W86531 Manuel utilisateur

Sharp

Sharp SPC900 Manuel utilisateur

La Crosse Technology

La Crosse Technology 404-50447 Manuel utilisateur

Datexx

Datexx DF0063 Manuel utilisateur

LG LEC-005 Manuel utilisateur