Opticon LG2 Series Manuel utilisateur
QUESTIONS?
Ask the experts at POSMicro.com.
1.800.241.6264
Live Chat Now
Monday - Friday 6 AM to 5 PM Pacic Time
BULK DISCOUNTS
FREE SHIPPING*
SE HABLA
ESPAñOL
*Free ground shipping to the continental USA on orders over $100.
For Help Call
1.800.241.6264
Opticon LG2 Series
Manual
More information available at POSMicro.com
LG2 User’s Manual 25-ULG2MU01-02 - 1
Save Settings
This version of the manual supports rmware 2098 and greater. Release date: July 04
User’s Manual
Opticon LG2 Imager
25-ULG2MU01-02
LG2 User’s Manual 25-ULG2MU01-02 - i
Save Settings
Statement of Agency Compliance
The LG2 can be set to use targeting lasers. If the targeting lasers are
activated, do not stare into the beams. The LG2’s targeting lasers
have been rated as Class IIa Lasers by IEC 60825-1.
The LG2 has been tested by an independent electromagnetic compat-
ibility laboratory in accordance with the applicable specications and
instructions.
The LG2 has been tested for compliance with FCC regulations
and was found to be compliant with all applicable FCC Rules and
Regulations.
IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, this device must not be co-located or operate in
conjunction with any other antenna or transmitter.
CAUTION: Changes or modications not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
The LG2 has been tested for compliance to CE standards and
guidelines and was found to conform to applicable CE standards,
specically the EMC requirements EN 55024, ESD EN 61000-4-2,
Radiated RF Immunity EN 61000-4-3, ENV 50204, EFT EN 61000-
4-4, Conducted RF Immunity EN 61000-4-6, EN 55022, Class B
Radiated Emissions, and Class B Conducted Emissions.
LG2 User’s Manual 25-ULG2MU01-02 - ii
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - iii
Save Settings
LG2 User’s Manual
Copyright © 2004 the Opticon, Inc..
All Rights Reserved.
The software described in this manual may only be used in accordance with the terms of its license
agreement.
No part of this publication may be reproduced in any form or by any means without written permission
from the Opticon, Inc. This includes electronic or mechanical means such as photocopying or recording
in information storage and retrieval systems.
NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does
not represent a commitment on the part of Opticon, Inc. Opticon, Inc. does not warrant that it is
accurate, complete or error free. Any use of the technical documentation is at the risk of the user.
Opticon reserves the right to make changes in specications and other information contained in this
document without prior notice, and the reader should in all cases consult Opticon to determine whether
any such changes have been made. Opticon shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from the furnishing,
performance, or use of this material. Opticon, Inc. does not assume any product liability arising out of or
in connection with the application or use of any product or application described herein.
NO LICENSE. No license is granted, either by implication, estoppel, or otherwise under any intellectual
property rights of The Opticon, Inc. Any use of hardware, software and/or technology of the Opticon, Inc.
is governed by its own agreement.
All other product names mentioned in this manual may be trademarks of their respective companies and
are hereby acknowledged.
The software and/or products of Opticon, Inc. include inventions that are patented or that are the subject
of patents pending.
LG2 User’s Manual 25-ULG2MU01-02 - ii
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - iii
Save Settings
Table of Contents
Chapter 1 - Getting Started
1.1 Introduction ........................................................................................................................ 2
1.2 Unpacking .......................................................................................................................... 3
1.3 Targeting and Reading Techniques................................................................................. 3-4
1.4 Imager Field of View and Resolution...............................................................................4-5
1.5 LG2 Decode Zone.............................................................................................................. 6
Chapter 2 - Installation Guides
2.1 USB Interface..................................................................................................................... 8
2.2 RS-232 Interface ................................................................................................................ 9
2.3 PS2 Interface ................................................................................................................... 10
2.4 Bluetooth Radio Overview........................................................................................... 11-13
2.5 Switching Cables.............................................................................................................. 14
2.6 Attaching Handle.............................................................................................................. 15
2.7 LG2 Battery and Battery Blank......................................................................................... 16
Chapter 3 - LG2 Programming: Optimizing the Reader for Your Environment
3.1 Introduction .................................................................................................................18-20
3.2 Global (All Triggers) Optimization Matrix.......................................................................... 20
3.3 Left Trigger Optimization Matrix ....................................................................................... 21
3.4 Right Trigger Optimization Matrix..................................................................................... 21
3.5 Handle Trigger Optimization Matrix.................................................................................. 22
3.6 Continous Trigger Optimization Matrix ............................................................................. 22
3.7 Continous Trigger Off ....................................................................................................... 23
3.8 Save Settings ................................................................................................................... 23
Chapter 4 - LG2 Programming: Symbology Settings
4.1 Introduction ...................................................................................................................... 25
4.2 Aztec Symbology ............................................................................................................. 25
4.3 Codabar Symbology......................................................................................................... 25
4.4 Codablock F Symbology .................................................................................................. 26
4.5 Code 128 Symbology....................................................................................................... 26
4.6 Code 93 Symbology......................................................................................................... 26
LG2 User’s Manual 25-ULG2MU01-02 - iv
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - v
Save Settings
Table of Contents
4.7 Code 39 Symbology.............................................................................................. 26-27
4.8 Composite Symbologies ............................................................................................ 27
4.9 Data Matrix Symbology ......................................................................................... 27-28
4.10 GoCode Symbology ................................................................................................... 28
4.11 Interleaved 2 of 5 Symbology .................................................................................... 28
4.12 Maxicode Symbology ................................................................................................. 29
4.13 MSI Plessy Symbology .............................................................................................. 29
4.14 PDF 417 Symbology ............................................................................................. 29-30
4.15 Micro PDF 417 Symbology ........................................................................................ 30
4.16 Postal Symbologies............................................................................................... 30-31
4.17 QR Code Symbology ................................................................................................. 31
4.18 RSS Symbology ................................................................................................... 31-32
4.19 UPC/EAN/JAN Symbologies...................................................................................... 32
4.20 Save Settings ............................................................................................................. 32
Chapter 5 - LG2 Programming: Interface Communication Settings
5.1 Reader ID and Firmware Version............................................................................... 34
5.2 USB Interface............................................................................................................. 35
5.3 PS2 Interface ............................................................................................................. 35
5.4 Bluetooth Radio Interface...................................................................................... 35-36
5.4.1 Bluetooth Radio Auto Connect ............................................................. 36
5.4.2 Bluetooth Radio Auto Disconnect .......................................................... 36
5.4.3 Bluetooth Radio Time Out Settings ....................................................... 37
5.4.4 Bluetooth Radio Disconnect .................................................................. 37
5.6 RS-232 Interface ........................................................................................................ 37
5.5.1 Data Bits ................................................................................................ 37
5.5.2 Stop Bit Data ......................................................................................... 38
5.5.3 Baud Rate.............................................................................................. 38
5.5.4 Parity ..................................................................................................... 38
5.5.5 RS-232 Batch Mode Considerations ..................................................... 39
5.6 Keyboard Support ...................................................................................................... 39
5.7 Save Settings ............................................................................................................. 39
LG2 User’s Manual 25-ULG2MU01-02 - iv
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - v
Save Settings
Table of Contents
Chapter 6 - LG2 Programming: Trigger Settings
6.1 Left Trigger Programming ......................................................................................... 41
6.2 Right Trigger Programming ....................................................................................... 41
6.3 Handle Trigger Programming .................................................................................... 42
6.4 Save Settings ............................................................................................................ 42
6.5 Image Uploader Software ......................................................................................... 42
Chapter 7 - LG2 Programming: User Feedback
7.1 LG2 Feedback Denition Guide ........................................................................... 44-45
7.2 Volume & Vibrate Mode Settings............................................................................... 46
7.3 Laser Settings ........................................................................................................... 46
7.4 Continous Scan Settings........................................................................................... 47
7.4.1 Sleep Time Out..................................................................................... 47
7.4.2 Trigger Delays ...................................................................................... 47
7.4.3 Duplicate Scan Delay ........................................................................... 48
7.5 Barcode Readability Index ................................................................................... 48-49
7.6 Save Settings ............................................................................................................ 49
Chapter 8 - LG2 Programming: Batch Mode
8.1 Batch Mode Settings ............................................................................................ 51-53
8.2 Time Stamp Settings ................................................................................................. 53
8.3 Save Settings ............................................................................................................ 54
Chapter 8 - Advanced LG2 Programming: Decode Performance
9.1 Decode Time LED’s for Non-Standard Inks ............................................................. 56
9.2 Targeting Zone Tolerances........................................................................................ 56
9.3 Windowing................................................................................................................. 57
9.4 VGA and SXGA Settings ........................................................................................... 58
LG2 User’s Manual 25-ULG2MU01-02 - vi
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 1
Save Settings
Table of Contents
9.5 Mirror Decoding............................................................................................................. 59
9.6 Save Settings ................................................................................................................ 59
Chapter 9 - Advanced LG2 Programming: Prex & Sufx and CodeXML
10.1 Prex Settings ............................................................................................................... 61
10.2 Sufx Settings .......................................................................................................... 61-62
10.3 Save Settings ................................................................................................................ 62
Chapter 11 - LG2: Maintenance and Troubleshooting
11.1 Reset Reader ................................................................................................................ 64
11.2 General Safety Information ...................................................................................... 64-65
11.3 Warranty................................................................................................................... 65-66
11.4 LG2 Accessories ...................................................................................................... 65-66
11.5 Frequently Asked Questions .................................................................................... 67-68
11.6 LG2 Maintenance.......................................................................................................... 69
11.7 Minimum Requirements................................................................................................ 69
11.8 LG2 Troubleshooting Guide ..................................................................................... 69-70
Chapter 11 - LG2 User’s Manual Change Log
12.1 Change Log.............................................................................................................. 72-73
Appendix A - LG2 Specications
Appendix B - LG2 Factory Default Settings
Appendix C - LG2 Programming Matrix
Appendix D - LG2 Cable Pin Out Specications
Appendix E - LG2 Dimensions
LG2 User’s Manual 25-ULG2MU01-02 - vi
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 1
Save Settings
Chapter 1 - Getting Started
LG2 User’s Manual 25-ULG2MU01-02 - 2
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 3
Save Settings
LG2 is a revolutionary new, bar LG2. Developed to be the rst universal reader, no other single de-
vice performs as many functions. With a cost of ownership far less than comparable systems, the
LG2 incorporates a unique dual path optical system, a 1.3 million pixel CMOS sensor, and a 400
MHz processor. This combination has created a reading system that supports:
• High density matrix barcodes and larger low density linear barcodes
• Superior working range
• High-speed omni-directional decoding
• Cordless and cabled interfaces
• Unsurpassed data rates
The LG2 sets a new benchmark for size and weight.
It is smaller and lighter than comparable systems yet
can withstand multiple drops to concrete. It is the only
product available in handheld, gun handle, and
presentation stand form factors with cabled, batch
and cordless versions. The cordless version utilizes
the latest Bluetooth™ class 1 radio with a 300 foot
operating range. The LG2 is rugged and lightweight
and the cordless version will operate for more than a
complete shift at the highest use rate. The LG2 per-
forms more than 3000 reads and transmits from a
single battery charge. The LG2 will automatically
discriminate between all major 2-D matrix and linear
barcode symbologies and features a timestamp
feature for logging data.
Whether you need a small, palm-held device or a traditional gun, LG2 was specically
developed so users may easily choose the device that best meets their needs. The LG2
is available in three (3) basic congurations:
• LG2 Cabled - USB, RS-232 or PS2 interfaces
• LG2 Batch - Store and forward device with memory and long-life battery
• LG2 Cordless - Long life battery and Bluetooth radio
1.1 - Introduction
Table des matières
Autres manuels Opticon Accessoires
