Optex OVS-6000 Manuel utilisateur

Select a sensor mounting location based on application (Notication or Dwell Time)

OPTEX OVS-6000 Quick Setup Guide

For detailed information, please refer to the installation manual supplied with each sensor.

Note: Mount to the side if you don’t have vehicle clearance of the sensor (see above right); ensure vehicles will not strike the sensor.

The OVS-6000 utilizes an active infrared transmitter and photoelectric

receiver located in the rectangular sensor head. This Quick Setup Guide

will answer the most common installation questions, including: Mounting

location, aiming the sensor head to achieve proper detection, self-learning,

and programming.

After choosing the mounting location, open the box and remove

the sensor.

View the Transmitter, Receiver and Dipswitches. See below for detail of

dipswitch settings.

Notication (detecting the approach of a vehicle) applications, vehicle clearance validation

Dwell Time (detecting the presence of a stopped vehicle) applications, vehicle clearance validation

sensor 3-4’ sensor 3- 4’

sensor 3 - 4’ sensor 3 - 4’

Note that the dipswitches are located behind the black cover, which

can be easily removed by pulling the cover forward.

(over)

* Aim detector beams in front of tube machine

Note: Mount to the side if you don’t have vehicle clearance of the sensor (see above right); ensure vehicles will not strike the sensor.

18730 Wilmington Ave, Unit 100

Rancho Dominguez, CA 90220

Ph 310 214-8644

Fax 310 898-1098

Toll free 800 877-6656

www.optex-america.com

OPTEX Technologies Inc.

(East Coast Ofce)

8510 McAlpine Park Dr.

Suite 108

Charlotte, NC 28211

Choose Sensor Settings

Test and Complete Installation

3 and 4 - Frequency

Set 3 and 4 Down (unless using 2 or more detectors with overlapping detec-

tion patterns next to each other; then, adjust to different frequencies).

8 - Delay

8 Down (shown), Notication (Vehicle Approaching): no delay.

8 Up requires 2 or more beams broken within a 3-second period for Dwell

time (Vehicle Stationary).

7 - LED Indicator

7 Down (shown), LED on, turns off with detection.

7 Up, LED stays on with power.

1 and 2 - Presence (Vehicle) Detection Timer

Notication (Vehicle Approaching): 1 and 2 Down (shown).

Dwell Time (Vehicle Stationary): 1 Up, 2 Down

5 and 6 - Adjust Detection Height Area

9 to 15 feet: 5 Up, 6 Down (shown).

12 to 24 feet: 5 Down, 6 Up.

Mount Sensor and Adjust the Detection Pattern

* Apply power - no vehicles in the detection pattern for a 10-second learning time.

When mounted on the ceiling, the sensor head is aimed in this direction.

Loosen keeper nut and adjust sensor head so that it aims at the ground

above the driver’s side of the vehicle.

The sensor projects narrow detection beams towards the ground.

The detection area contains 4 beams, as displayed in image at

right. The IR Locator (optional) will give you the ability to locate the

individual beams. When the LEDs light up on the IR Locator, you

are within the beam area. The IR Locator Adjustment Tool can be

purchased from OPTEX. Call 800-877-6656 to learn more.

IR Locator (optional)

Table des matières

Autres manuels Optex Capteur de sécurité

Optex

Optex PROWAVE AIR-SLIDE 2 Manuel utilisateur

Optex

Optex inSight INS-HX-80N Manuel utilisateur

Optex

Optex HX-80N Manuel utilisateur

Optex

Optex WFX-360HW Manuel utilisateur

Optex

Optex RLS-3060 Manuel utilisateur

Optex

Optex CDX Series Manuel utilisateur

Optex

Optex OA-PRESENCE TN Manuel utilisateur

Optex

Optex URX-P01 Manuel utilisateur

Optex

Optex URX-P01WH Manuel d'exploitation et d'entretien

Optex

Optex OVS-50TNR Manuel utilisateur

Optex

Optex AX-330PLUS Manuel utilisateur

Optex

Optex X-ZONE Manuel utilisateur

Optex

Optex FMX-DT-X5 Manuel utilisateur

Optex

Optex CX-702S Manuel utilisateur

Optex

Optex HX-40 Manuel utilisateur

Optex

Optex WX Shield Series Manuel utilisateur

Optex

Optex OVS-50TNR Manuel utilisateur

Optex

Optex VX-402R Manuel utilisateur

Optex

Optex X-ZONE Manuel utilisateur

Optex

Optex inSight INS-HX-80N Manuel utilisateur

Optex

Optex RXC-DT-X5 Manuel utilisateur

Optex

Optex WX Infinity Series Manuel utilisateur

Optex

Optex REDWALL-V Mode d’emploi

Optex

Optex AX-100TFR Series Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur