OPT7 Aura Manuel utilisateur
GRILLE
INSTALLATION GUIDE
TM
MAIN COMPONENTS
12'' LIGHT STRIPS
AURA CONTROL BOX REMOTE
V1.1.062719
TM
MOUNTING KIT
FUSE TAPS
EXTENSION WIRES CIGARETTE LIGHTER POWER ADAPTER POWER HARNESS
Decide where to locate the light
strips and ensure wiring has enough
length for control box to be installed
in desired location.
STEP 1
INSTALLATION
AUXILIARY WIRE EXTENSION WIRE
TM
TM
POWER SOURCE POWER HARNESS
TM
FUSE TAP
FUSE
BOX GROUND
CIGARETTE POWER ADAPTER12 VOLT CHARGING PORT
Once connected, plug the control box Cigarette Power Adapter into an available
12 volt charging port.
As shown below, connect all light pods to the control box with the included
extension cables.
or, connect the positive wire to the fuse tap and connector the open negative wire to a
ground (any metal surface). Then plug the fuse tap into the 10amp switched fuse.
INSTALLATION
Secure Control box in desired
location with Velcro or zip ties.
* CONTROL BOX NOT WATERPROOF
Ensure the control box is safely and
securely hidden from exposing
elements of moisture.
Use the zip ties to tie all wiring away
from all moving components.
Using the included E-Z Remote, select your desired color or pattern.
STEP 2
STEP 3
STEP 4
TM
Dimmer
Color Selection
Multi-Color Fade
Multi-Color Cycle
SoundSync™
Press multiple times to change color
Adjust speed with "Dimmer" buttons
Adjust speed with "Dimmer" buttons
Adjust speed with "Dimmer" buttons
Single-Color Strobe
On / O
Press multiple times to change color
To adjust the sensitivity, please visit
www.OPT-7.com
NOTE: This feature activates white light only.
In order to activate Door Assist Sync, you need to connect the aux wiring of
Aura control box to the positive and negative wiring of dome or door light.
AUX WIRING FOR A DOME/DOOR LIGHT
DISCLAIMER
OPTIONAL UPGRADE
NEED SUPPORT?
Scan for tutorial videos, troubleshooting tips,
and more.
OPT7 Lighting is not liable for damages or personal injuries
while installing this product. The Installation Guide is intended
as assistance to reduce setup time. OPT7 Lighting assumes no
responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with
aftermarket upgrades, please seek professional assistance.
Upgrade your Aura Original Control Box to the Aura Pro Bluetooth
Control Box. All new AURA Pro Bluetooth is App enabled by a
smartphone controller (iOS & Android Compatible).
AURA PRO BLUETOOTH CONTROL BOX
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
Table des matières
Autres manuels OPT7 Accessoires automobiles
OPT7
OPT7 AURA PRO V2 INTERIOR NAVI Manuel utilisateur
OPT7
OPT7 AURA INTERIOR Manuel utilisateur
OPT7
OPT7 PHOTON RGB ROCK LIGHTS + MAGNET Manuel utilisateur
OPT7
OPT7 AURA UNDERBODY Manuel utilisateur
OPT7
OPT7 Cyclone Manuel utilisateur
OPT7
OPT7 AURA GRILLE Manuel utilisateur
OPT7
OPT7 MUSTANG ARROW Manuel utilisateur
OPT7
OPT7 AuraLED Manuel utilisateur
OPT7
OPT7 Quantum Rock Lights Bluetooth Manuel utilisateur
