Ops-Core FAST Manuel utilisateur

For FAST®Bump Helmet Systems

This product is covered by one or more patents.

For more information visit www.gentexcorp.com/patents

H11246 REV. A

Gentex Corporation 324 Main Street Carbondale, PA 18407

ARC is a trademark of Gentex Corporation or its afliates

BUMP HELMET

OPERATOR’S MANUAL

TABLE OF CONTENTS

Introduction

Helmet System Components

Sizing Guide

Retention System Operation

Accessory Integration

Modular Bungee Shroud

PowerPath ARC Rails

Cable Integration

Exterior Loop

Comms Headsets

Maintenance & Storage

Replacement Parts

Operator Notes

Warning & Warranty

INTRODUCTION

ABOUT YOUR OPS-CORE®FAST®BUMP HELMET SYSTEM

The Ops-Core FAST Bump Helmet System is an innovative and advanced headborne protection platform

providing protection from blunt impact, and environmental threats. The FAST Helmet System seamlessly

integrates with Ops-Core total headborne system solutions including situational awareness, optical, and

respiratory protection.

HELMET SYSTEM COMPONENTS

Modular

Bungee Shroud Exterior Loop

Shroud Bungee

Low-Profile

Head-Loc™

Chinstrap

PowerPath

ARC Rail

Front Brow

Comfort Pad

Adjustable

Comfort Pads

Vented

Lux Liner

Adjustable

Comfort Pads

Universal

Fitband

Occ-Dial™

Adjustment Knob

HELMET SIZING GUIDE

X-LARGE

FAST HELMET SIZE CHINSTRAP SIZE (in)

MMEDIUM

LARGE

XXL XX-LARGE 29-32.3

27.5-30.5

26-29

24.5-27.5

CHINSTRAP SIZING GUIDE

Certain head shapes may require a smaller or larger chinstrap

than the one that comes with the helmet you selected. The sizing

guide is provided for reference. If you feel a different chinstrap

size is needed, contact Ops-Core customer service.

13 14

15 16

17 18

2 0

FAST HELMET SIZE

Head Circumference (cm)

Head Circumference (in)

Head Size (US)

53 - 56

20⁄ - 22

up to 7

56 - 59

22 - 23¼

up to 7⁄

59 - 62

23¼ - 24⁄

up to 7⁄

62 - 64.5

24⁄- 25⁄

XXL

up to 8⁄

14 15

16 17

18 19

2 0

RUN MEASURING

TAPE ALONG FRONT

EDGE OF EAR

FAST helmets have been designed from the ground up to t the largest group of users in helmet sizes that most

closely match their heads. However, there is still a small percentage of users that will not t our standard sizing

congurations. Please use the sizing guide below to determine your helmet size and your chinstrap size.

SIZING GUIDE

4ADJUST FRONT HEAD-LOC SLIDERS

With both hands, pull the two Front Head-Loc Sliders on the

webbing straps that come from the front temples of the helmet

toward your chin until snug.

Occ-Dial

Adjustment Knob

RETENTION SYSTEM OPERATION

1FASTEN THE CHINSTRAP

Put the helmet on and fasten the chinstrap buckle.

Rear

Head-Loc

Slider

3ADJUST REAR HEAD-LOC SLIDERS

With both hands, pull the two Rear Head-Loc Sliders on the

lower webbing straps toward your chin until snug.

NOTE: THE TECHNIQUE WORKS BEST IF YOU ONLY HOLD

THE PLASTIC SLIDERS AND DON’T TOUCH THE WEBBING.

2ADJUST THE OCC-DIAL

Use your thumb to rotate the Occ-Dial Adjustment Knob to

tighten the tband until it is comfortably snug.

Front Head-Loc Slider

ATTACHING ACCESSORIES TO THE HELMET

There are three ways of attaching accessories to the Ops-Core FAST Helmet: The Modular Bungee Shroud,

PowerPath ARC Rails and Exterior Loop. These three components provide convenient and secure ways to

quickly attach and detach various accessories to different positions.

ACCESSORY INTEGRATION

Modular

Bungee

Shroud

PowerPath ARC Rail

Exterior Loop Exterior Loop

Exterior

Loop

ABOUT THE MODULAR BUNGEE SHROUD

The Modular Bungee Shroud (MBS) mounts to Ops-Core FAST helmets using the standard 3-hole pattern. The

MBS has an integrated Night Vision Goggle (NVG) bungee that does not interfere with any other accessories,

providing a low prole option for stabilizing NVGs. The MBS also has a removable metal insert that can be

swapped out to provide different mounting solutions without completely removing the shroud from the helmet.

MODULAR BUNGEE SHROUD

ATTACHING STABILIZING BUNGEES TO NVGS

Some NVGs may require the use of the Split Rings to attach the carabiner

bungee clips.

NVGs Attached with Split Rings NVGs Attached without Split Rings

Split Rings (sold separately)

Exterior

Loop

ATOP RAIL

Top Rail can accommodate

Picatinny Adapters, which

connect devices compatible with

1911 Picatinny Rail, and Wing-Loc

Adapters, which provide a base

to mount a variety of headborne

accessories.

BRAIL CORNER

Rail corner allows for instant and

secure snap-in attachment of

Para-Flite and Carleton O2 masks

with O2 Single Strap Kit.

CBACK RAIL

Goggle Swivel Clips, attached

to your choice of goggles, can

quickly clip into the back rail

while allowing freedom

of rotation.

ARC ADAPTERS

The following adapters are commonly used for attaching accessories to

the FAST Bump Helmet: Picatinny & Wing-Loc Adapters (A), O2 Single

Strap Kit (B), and 36mm Goggle Swivel Clip Kit (C).

Picatinny

Adapter

Wing-Loc

Adapter

O2 Strap Kit

(Not Included)

36mm Goggle Swivel Clips

(Not Included)

Cable Tie RoutingCable Tie Routing

Applique / Cable Clip

Attachment

Mandible

Attachment

Counterweight /

Battery Pack

Strap Routing

PowerPath ARC Rails are mounted to the sides of the helmet to allow for quick yet secure donning or dofng of

various headborne accessories.

POWERPATH ARC RAILS

Table des matières

Autres manuels Ops-Core Accessoires pour motos

Ops-Core

Ops-Core Fast Bump Manuel utilisateur

Ops-Core

Ops-Core FAST SF Manuel utilisateur

Ops-Core

Ops-Core SKULL Manuel utilisateur

Ops-Core

Ops-Core MBS Manuel utilisateur

Ops-Core

Ops-Core Mesh Helmet Cover Manuel utilisateur

Ops-Core

Ops-Core UNIVERSAL EXTERIOR LOOP KIT Manuel utilisateur

Ops-Core

Ops-Core ACH-ARC Manuel utilisateur

Ops-Core

Ops-Core MOTO VISOR Manuel utilisateur

Ops-Core

Ops-Core MOTO MANDIBLE Manuel utilisateur

Ops-Core

Ops-Core ACH Manuel utilisateur

Ops-Core

Ops-Core FAST LOW PROFILE BALLISTIC APPLIQUÉ Manuel utilisateur

Ops-Core

Ops-Core Mesh Helmet Cover Manuel utilisateur

Ops-Core

Ops-Core FORCE-ON-FORCE MANDIBLE Manuel utilisateur

Manuels Accessoires pour motos populaires d'autres marques

SRC

SRC B-TRK502-01-01-SL Manuel utilisateur

3M Speedglas 9100 MP Manuel utilisateur

hepco & becker

hepco & becker 6307520 00 01 Manuel utilisateur

HOMCOM

HOMCOM AA0-077 Manuel utilisateur

hepco & becker

hepco & becker 6307558 00 01 Manuel utilisateur

Wunderkind Custom

Wunderkind Custom 106503-F15 Guide de l'utilisateur

Dräger

Dräger HPS 3500 Manuel utilisateur

M-WAVE

M-WAVE SKI Manuel utilisateur

Kuryakyn

Kuryakyn 6212 Manuel utilisateur

hepco & becker

hepco & becker 6507504 00 01 Manuel utilisateur

Tool it

Tool it PROMAX LCD 9.13G Manuel utilisateur

Custom Dynamics

Custom Dynamics TruWrapz Manuel utilisateur

Roof

Roof RO200 CARBON Manuel utilisateur

Kabuto

Kabuto Japan IBUKI Manuel utilisateur

PUIG

PUIG 5051 Manuel utilisateur

rizoma

rizoma ZTH050 Manuel utilisateur

Joubert

Joubert 10001711 Manuel utilisateur

Sperian

Sperian Optrel p420 Manuel utilisateur