Oppo BDP-83 Guide de démarrage rapide

BDP-83 Firmware Upgrade Instruction

The BDP-83 beta sample unit requires a firmware upgrade as new firmware versions are released to add features and fix

bugs. To upgrade to a new firmware version, please follow these steps:

1. Prepare a USB thumb drive, or a flash memory card with a USB card reader. Connect the USB drive to a computer

which you will use to download and install the firmware. The file system on the USB drive shoud be FAT, although

FAT32 generally works too. NTFS is not supported. If you use Windows, you can check the file system type by

examining the "Properties" of the USB drive.

2. Download the firmware. It should be a ZIP file. Expand the content of the ZIP into the root folder of the USB drive.

Once expanded, you should have a "UPG" folder on the USB drive. Inside the UPG folder there should be two files.

3. Unplug the USB drive from the computer. You will use this USB drive to upgrade the firmware of the BDP-83 BD

player.

4. Connect the BDP-83 BD player to a TV display. If all goes well you should see the logo screen on the TV.

5. Insert the USB drive to the USB port (front or back) of the BDP-83 player. The player will automatically detect the

USB drive and firmware. In case the player does not detect the firmware, select "Device Setup" - "Firmware Upgrade" -

"Via USB" from the setup menu.

6. With the "OK" button highlighted, press the "ENTER" key on the remote control to start the upgrade process. Make

sure the is no power interruption during the upgrade. It should take about 30 seconds.

7. Once the BD loader firmware is upgraded, the player will start upgrading the main firmware. Wait for it to start the

process automatically or press the "ENTER" button on the remote.

8. The player will start searching for the upgrade file on the USB drive. Once the firmware file is found, you will be

asked to confirm the upgrade. With the "OK" button highlighted, press the "ENTER" key on the remote control.

10. Wait for the upgrade process to complete. It should take about 20 seconds.

11. When the upgrade process is completed, unplug the USB drive from the BDP-83 player. The player will turn off

automatically.

12. When the player boots up again, check the firmware version by accessing the "Device Setup" - "Firmware

Information" menu.

This completes the firmware upgrade process.

Autres manuels pour BDP-83

Manuels Lecteur Blu-ray populaires d'autres marques

Samsung

Samsung BD-F5900 Manuel utilisateur

Philips

Philips BDP3380K Manuel utilisateur

Samsung

Samsung BD-P4600 Manuel utilisateur

Sharp

Sharp BD-HP17U - AQUOS 1080p Blu-ray DiscTM Player Manuel utilisateur

Pioneer

Pioneer BDP-140 Manuel d'installation et d'exploitation

Samsung

Samsung BD-D8200A Manuel utilisateur

LG HLX50W Manuel utilisateur

Sony

Sony BDP-S300 - Blu-Ray Disc Player Manuel utilisateur

Marantz

Marantz UD9004 Manuel utilisateur

Panasonic

Panasonic DMR-HCT230 Manuel utilisateur

LG BD611 Manuel utilisateur

Panasonic

Panasonic Diga DMR-PWT420 Manuel utilisateur

LG BD611 Manuel utilisateur

Marantz

Marantz BD7004 Guide de démarrage rapide

Kogan

Kogan KABRP3DWFIA Manuel utilisateur

Toshiba

Toshiba BDX2700 Manuel utilisateur

Samsung

Samsung BD-E5400 Manuel utilisateur

Samsung

Samsung BD-F5100 Manuel utilisateur