Opentrons Flex Manuel utilisateur

Opentrons Flex

Liquid Handling Robot

Quickstart Guide

Opentrons Labworks Inc.

August 2023

OPENTRONS FLEX

Table of Contents

Product and Manufacturer Description 3

– Crate Contents

Product Elements 4

Unboxing 7

– Disassemble Crate and Remove Robot

– Final Assembly and Power On

First Run 16

– Connect to a Network or Computer

– Install Software Updates

– Attach Emergency Stop Pendant

– Name Your Robot

Additional Setup Information 18

Additional Product Information 18

– Maintenance and Cleaning

– Warranty

– Support

– Regulatory Compliance

– Product Description

– Manufacturer Description

Post-sales service & contacting Opentrons

If you have any questions about the use of the system,

abnormal phenomena, or special needs, please contact:

support@opentrons.com. Also visit www.opentrons.com.

Product and Manufacturer Description

PRODUCT DESCRIPTION

Opentrons Flex is a liquid-handling robot designed for high throughput

and complex workows. The Flex robot is the base of a modular

system that includes pipettes, a labware gripper, on-deck modules, and

labware — all of which you can swap out yourself. Flex is designed with

a touchscreen so you can work with it directly at the lab bench, or you

can control it from across your lab with the Opentrons App or our

open-source APIs.

MANUFACTURER DESCRIPTION

Opentrons Labworks Inc

45-18 Ct Square W

Long Island City, NY 11101

OPENTRONS FLEX

Product Elements

Status Light TouchscreenCamera

Frame

Side Windows

Handle Caps

Front Door

Deck

Gantry

Side Covers

USB-A Ports

Ports

AUX-1, AUX-2, USB-B, Ethernet

IEC Power Inlet

On/Off

Switch

Shipping weight (crate, robot, parts): 148 kg (326 lbs)

Robot weight: 88 kg (195 lbs)

Dimensions: 87 cm W x 69 cm D x 84 cm H (about 34”x 27”x 33”)

Operating space:

Flex needs 20 cm (8”) of side and back clearance. Do not place the

sides or back ush against a wall or another surface.

CRATE CONTENTS

The Flex ships with the following items. Other instruments and modules

are packaged separately, even if you purchased them together as a

workstation.

(1) Opentrons Flex robot

(1) USB cable (1) Power cable(1) Ethernet cable

(1) Emergency Stop Pendant

Product Elements

OPENTRONS FLEX

(1) Deck slot with labware clips (4) Spare labware clips

(1) Pipette calibration probe (4) Carrying handles and caps

(16 + spares) Window screws

(M4x8 mm at head)

(10) Spare deck slot screws

(M4x10 mm socket head)

(1) Top window panel (4) Side window panels

(1) 2.5 mm hex screwdriver (1) 19 mm wrench

(12) Spare deck clip screws

(M3x6 mm socket head)

(5) L-keys

(12 mm hex, 1.5 mm hex,

2.5 mm hex, 3 mm hex, T10 Torx)

Unboxing

Working with a partner, unboxing and assembly takes about 30 minutes

to an hour. See the Installation and Relocation chapter in the Flex

Instruction Manual for more information.

DISASSEMBLE CRATE AND REMOVE ROBOT

Unlock the latches holding the top to the sides, and remove the

top panel.

Note: The Flex requires two people to lift it properly.

Also, lifting and carrying the Flex by its handles is

the best way to move the robot.

You can reuse the crate and internal shipping

components. We recommend keeping the crate

panels and the internal shipping items in case you

need to transport your Flex in the future.

OPENTRONS FLEX

Cut open the blue shipping bag, remove these items from the

padding, and set them aside:

◾User Kit

◾Power, Ethernet, and USB cables

◾Emergency Stop Pendant

Remove the top piece of foam padding to expose the window

panels. Remove the window panels and set them aside. You’ll

attach these later.

Unlock the remaining latches holding the side panels to each

other and the base of the crate. Remove the side panels and set

them aside.

Using the 19 mm wrench from the User Kit, unbolt the brackets

from the crate bottom.

OPENTRONS FLEX

Pull or roll the shipping bag all the way down to expose the

entire robot.

With help from your lab partner, grab the handholds in the

orange shipping frames on either side of the robot’s base,

lift the Flex off the crate base, and set it down on the oor.

Autres manuels pour Flex

Table des matières

Autres manuels Opentrons Robotique

Opentrons

Opentrons OT-2 Manuel utilisateur

Manuels Robotique populaires d'autres marques

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Manuel utilisateur

SunFounder

SunFounder PiDog Manuel utilisateur

Universal Robots

Universal Robots UR5 Manuel utilisateur

Universal Robots

Universal Robots E Series Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN-MPL80 II Manuel utilisateur

EFORT

EFORT ECR5 Manuel d'instructions

Epson

Epson C8 Series Manuel utilisateur

WowWee

WowWee ROBOQUAD Manuel utilisateur

Milvus Robotics

Milvus Robotics SEIT 100 Manuel utilisateur

RoboMaster

RoboMaster AI Robot 2020 Standard Version Manuel utilisateur

fischertechnik

fischertechnik Mini Bots Manuel utilisateur

YASKAWA

YASKAWA MA2010 Manuel

Abicor Binzel

Abicor Binzel iCAT mini Manuel utilisateur

ABB

ABB OmniCore E10 Manuel utilisateur

YASKAWA

YASKAWA Motoman DX200 Manuel utilisateur

pitsco

pitsco Tetrix Max Manuel utilisateur

ECOVACS

ECOVACS DEEBOT R95 Manuel utilisateur

Feng Yuan

Feng Yuan Interstellar Warrior Manuel utilisateur