Onkyo TX-L20D Manuel utilisateur
E
N
Before Start
What's in the box .................................................................... 2
Part Names
Front Panel ............................................................................. 3
Rear Panel .............................................................................. 4
Remote Controller .................................................................. 5
Display .................................................................................... 6
Install
1. Connect the Speakers ........................................................ 7
2. Connect the TV ................................................................... 8
3. Connect the HDMI AV Components ................................... 9
4. Connect the Audio Components ....................................... 10
5. Connect Other Cables .......................................................11
Initial Setup
Initial Setup with Auto Start-up Wizard ................................. 12
Playback
AV Component Playback ...................................................... 14
Internet Radio ....................................................................... 15
Spotify ................................................................................... 16
Music Server ......................................................................... 17
USB Storage Device ............................................................. 19
AirPlay® ................................................................................ 21
BLUETOOTH® Playback ......................................................22
Listening to the FM/DAB Radio ............................................ 23
Listening Modes ................................................................... 26
Quick Menu .......................................................................... 28
Other Functions .................................................................... 29
Supplementary Information
Supplementary information for player functions .................... 30
Advanced Setup
Setup Menu ........................................................................... 31
Firmware Update .................................................................. 43
Others
Troubleshooting .................................................................... 46
General Specifications .......................................................... 51
About HDMI .......................................................................... 52
License and Trademark Information ..................................... 53
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
NETWORK STEREO RECEIVER
TX-L20D
Instruction
Manual
2
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
E
N
Before Start
What's in the box
0
Connect speakers with
4
Ω to
8
Ω impedance.
0
The power cord must be connected only after all other cable connections are completed.
0We will not accept responsibility for damage arising from the connection of equipment
manufactured by other companies.
0Functionality may be introduced by firmware updates and service providers may cease
services, meaning that some network services and content may become unavailable in
the future. Furthermore, available services may vary depending on your area of
residence.
0Specifications and appearance are subject to change without prior notice.
Main unit (1)
Remote controller (RC-934R) (1), batteries (AAA/R03) (2)
DAB/FM antenna (1)
> Before Start >PartNames > Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
3
E
N
Part Names
Front Panel
1. ÍON/STANDBY button: Turns the unit on or into standby mode.
2. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the features
are enabled that continue to work when this unit is in standby, such as HDMI Standby
Through and Network Standby.
3. Display (ÄP6)
4. Remote control sensor
5. Volume dial: Allows you to adjust the volume.
6. USB port: A USB storage device is connected so that music files stored in it can be
played. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
7. PHONES jack: Stereo headphones with a mini plug (φ3.5 mm) are connected.
8. INPUT43 button: Switches the input to be played. (BD/DVD / CBL/SAT / GAME /
STRM BOX / CD / TV / PHONO / DAB / FM / NET / USB / BLUETOOTH)
9. TUNING43buttons: Select the frequency of FM/DAB radio stations.
4
> Before Start >PartNames > Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
E
N
Rear Panel
1. ANTENNA DAB/FM jack: Connect the supplied antenna.
2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled
device. The diagram shows the movable range for the wireless antenna. Do not try to
force it beyond this range otherwise you may break it.
3. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.
4. GND terminal: The ground wire of the turntable is connected.
5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals
with a digital optical cable or digital coaxial cable.
6. Power cord
7. ETHERNET port: Connect to the network with an Ethernet cable.
8. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a
TV.
9. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an
AV component.
10.
SPEAKERS terminals: Connect speakers with speaker cables.
11.
SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.
180°
90°
> Before Start >PartNames > Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
5
E
N
Remote Controller
1. Í button: Turns the unit on or into standby mode.
2. Input selector buttons: Switches the input to be played.
3. Q (QUICK MENU) button: You can perform common settings on the TV screen. (ÄP28)
4. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.
5. button: Displays the Setup menu.
(
Ä
P31)
6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.
7. button: Temporarily mutes audio. Press again to cancel muting.
8. Listening mode buttons: Allows you to select the listening mode. (ÄP26)
9. Play buttons: You can start play of the Music Server or USB.
10.
button: You can start repeat or random play of the Music Server or USB.
CLEAR button: Deletes all characters you have entered when entering text on the TV
screen.
11.
DIMMER button: You can adjust the brightness of the display in three steps. It cannot be
turned off completely.
12.
button: Switches the information on the display.
13.
button: Returns the display to the previous state during setting.
14.
MODE button: Switches tuning to an FM station between automatic tuning and manual
tuning.
15.
MEMORY button: Used to register FM/DAB radio stations.
30°
30°
Approx.5 m
(16 ft.)
6
> Before Start >PartNames > Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
E
N
Display
1. Lights in the following conditions.
HDMI: HDMI signals are input and selected.
ARC: Audio signals from the ARC compatible TV are input and selected.
USB: When "USB" is selected with the input selector and the unit is connected by USB
and the USB device is selected. Flashes if the USB is not properly connected.
NET: When "NET" is selected with the input selector and the unit is connected to the
network. It will flash if the connection to the network is not correct.
DIGITAL: Digital signals are input and the digital input selector is selected.
2. Lights when operating the "NET" or "USB" input selector indicating remote controller
cursor operations are possible in screens showing list of tracks, for example.
3. Lights when headphones are connected.
4. Lights when operating the "NET" or "USB" input selector when tracks are played or
paused.
5. Lights according to the type of input digital audio signals and the listening mode.
6. Lights in the following conditions.
RDS: Receiving RDS broadcasting.
AUTO: When FM tuning mode is auto.
TUNED: Receiving FM radio.
FM STEREO: Receiving FM stereo.
SLEEP: Sleep timer has been set.
ASb: When Auto Standby function is enabled. (ÄP41)
7. Flashes when muting is on.
8. Displays various information of the input signals. Characters that cannot be displayed on
this unit are replaced with asterisks ( ＊).
Neo:6
7
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
E
N
Install
1. Connect the Speakers
a Speaker cable, b Subwoofer cable
3
2
1
1/2˝
(12 mm)
1
3 4
2
a
b
Refer to the illustration to connect the speaker system.
Twist the wires of the speaker cable tightly before inserting
into the SPEAKERS terminals. After inserting the cables,
tighten the terminals firmly by turning to the right. Make
correct connection between the unit’s jacks and speaker’s
jacks (+ to + and – to –) for each channel. If connection is
wrong, a bass sound may become poor due to reverse
phase.
To connect a powered subwoofer, use a subwoofer cable
and connect to the SUBWOOFER PRE OUT jack.
Make sure the exposed wires of the speaker cable do not
stick out of the speaker terminals when connecting. If the
exposed wires of the speaker cable touch the rear panel or
the + and – wires touch each other, the protection circuit will
be activated. (ÄP46)
Setup
Settings are required if a powered subwoofer is not
connected. Make settings after all connections are
complete. Press on the remote controller, and in the
Setup menu displayed set "2. Speaker" - "Configuration"-
"Subwoofer" to "No".
8
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
E
N
2. Connect the TV
a HDMI cable, b Digital optical cable
a
b
DIGITAL
OPTICAL OUT
1
To ARC TV
For a TV that supports the ARC (Audio Return Channel)
(ÄP52) feature, use an HDMI cable and connect according
to illustration "a". Choose an HDMI IN jack on the TV that
supports ARC when connecting.
To Non-ARC TV
For a TV that does not support the ARC (Audio Return
Channel) feature, connect both the HDMI cable in illustration
"a" and the digital optical cable in "b".
Setup
0Settings are required to use the ARC function. Select
"Yes" in "3. Audio Return Channel" (ÄP13) in the Initial
Setup.
0Please refer to the TV’s operation manual for directions
on connections and setup for the TV.
9
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
E
N
3. Connect the HDMI AV Components
a HDMI cable
e.g. BD
a
HDMI OUT
1
BD/DVD GAME
a
Cable/Satellite
set-top box
Streaming media
player
This is an example of connection with an AV component
that has an HDMI jack. With connection to an AV
component that conforms with the CEC (Consumer
Electronics Control) standard, you can use features such as
the HDMI CEC feature that links with the input selector, and
the HDMI Standby Through feature which allows you to
play video and audio from AV components on the TV even
when this unit is in standby mode. (ÄP52)
0To play 4K or 1080p video, use the high speed HDMI
cable.
Setup
0Settings are required to use the HDMI CEC and HDMI
Standby Through features. (ÄP37) Make settings after
all connections are complete.
0To enjoy digital surround sound including Dolby Digital,
audio output should be set to "Bitstream output" on the
connected Blu-ray Disc player or other device.
10
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary Information | Advanced Setup | Others
E
N
4. Connect the Audio Components
a Digital coaxial cable, b Analog audio cable
CD
a
b
Turntable
Connecting a CD player
Use a digital coaxial cable to connect a CD player to the
DIGITAL IN COAXIAL jack.
Connecting a turntable
You can also connect a turntable that has an MM-type
cartridge to the PHONO jack.
0If the turntable has a built-in audio equalizer, connect it to
an AUDIO IN jack other than the PHONO jack. Further, if
the turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any AUDIO IN
jack other than the PHONO jack.
If the turntable has a ground wire, connect it to the GND
terminal of this unit.
Autres manuels pour TX-L20D
1
Table des matières
Autres manuels Onkyo Récepteur stéréo
Onkyo
Onkyo TX-8030 Manuel utilisateur
Onkyo
Onkyo TXNR905 - AV Network Receiver Manuel d'utilisation et d'entretien
Onkyo
Onkyo TX-SR876 - AV Receiver Fiche technique
Onkyo
Onkyo TX SR875 - AV Receiver Manuel d'utilisation et d'entretien
Onkyo
Onkyo TX-5000 Manuel utilisateur
Onkyo
Onkyo TX-RZ820 Manuel utilisateur
Onkyo
Onkyo TX-SR606 Manuel utilisateur
Onkyo
Onkyo TX-NR777 Guide d'installation
Onkyo
Onkyo TX-RZ70 Manuel
Onkyo
Onkyo TX-SR494 Manuel
Onkyo
Onkyo TX-8390 Manuel utilisateur
Onkyo
Onkyo TX-NR616 Manuel d'utilisation et d'entretien
Onkyo
Onkyo TX-5000 Manuel utilisateur
Onkyo
Onkyo TX-8020 Manuel utilisateur
Onkyo
Onkyo TX-RZ820 Guide d'installation
Onkyo
Onkyo TX-RZ50 Manuel
Onkyo
Onkyo TX-8255 Manuel utilisateur
Onkyo
Onkyo TX-SR500 Manuel utilisateur
Onkyo
Onkyo TX-8222 Manuel utilisateur
Onkyo
Onkyo TX-SR3100 Manuel utilisateur
Manuels Récepteur stéréo populaires d'autres marques
Pioneer
Pioneer SX-1000TA Manuel utilisateur
Yamaha
Yamaha MusicCast TSR-5B3D Manuel utilisateur
Sony
Sony STR-DE335 - Fm Stereo/fm-am Receiver Manuel utilisateur
Sony
Sony STR-DG500 - Multi Channel Av Receiver Manuel utilisateur
Panasonic
Panasonic AJSD955B - DVCPRO50 STUDIO DECK Manuel utilisateur
Pioneer
Pioneer SX-838 Manuel utilisateur