Onkyo NS-6130 Manuel utilisateur
E
N
Before Start
What's in the box .................................................................... 2
Part Names
Front Panel ............................................................................. 3
Rear Panel .............................................................................. 4
Remote Controller .................................................................. 5
Display .................................................................................... 6
Install
Connections with an amplifier ................................................. 7
Connecting the power cord, etc. ............................................. 9
Initial Setup
Power On & Initial Setup ...................................................... 10
Playback
USB Storage Device/HDD .................................................... 12
Internet Radio ....................................................................... 14
Spotify ................................................................................... 15
AirPlay® ................................................................................ 16
Music Server ......................................................................... 17
Entering text ......................................................................... 19
Supplementary information
Supplementary information for player functions .................... 20
Advanced Setup
Advanced Settings................................................................. 21
Firmware Update .................................................................. 24
Others
Troubleshooting .................................................................... 26
General Specifications .......................................................... 28
License and Trademark Information ..................................... 29
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
NETWORK AUDIO PLAYER
NS-6130
Instruction
Manual
2
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
E
N
What's in the box
Before Start
0The power cord must be connected only after all other cable connections are completed.
0We will not accept responsibility for damage arising from the connection of equipment
manufactured by other companies.
0Functionality may be introduced by firmware updates and service providers may cease
services, meaning that some network services and content may become unavailable in
the future.
0Specifications and appearance are subject to change without prior notice.
Main unit (1)
Remote controller (RC-942E) (1), Batteries (AAA/R03) (2)
Analog audio cable (1)
RI cable (1)
Power cord (1)
> Before Start >PartNames > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
3
E
N
Front Panel
Part Names
1. ÍON/STANDBY button: Turns the unit on or to standby mode.
2. Remote control sensor
3. Display (P6)
4. Play button:
∫
: This button stops playback.
1
/; : Play or pause play.
5. MENU/ENTER dial (:/9)
When playing, turn left or right to select the folder or file, then press to confirm.
Press and hold to show the settings screen. While the menu is displayed, turn the dial to
select items and press to confirm the settings.
0Depending on the input, the operation may not start.
6. USB
port: Connect a USB storage device or HDD (hard disk drive) to play music files. You can
also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.
0When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port
(maximum 5 V/1 A) on the rear of the unit.
7. DISPLAY button: Switches the information on the display.
8. INPUT button: Switches the input to be played.
9. RETURN button: Returns to the previous screen.
4
> Before Start >PartNames > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
E
N
Rear Panel
1. AC INLET: Connect the supplied power cord.
2. Wireless antenna: Used for Wi-Fi connection. Adjust their angles according to the
connection status.
3. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You
can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
4. AUDIO OUTPUT DIGITAL COAXIAL jack: Connect a pre-main amplifier with digital
coaxial cable.
5. ETHERNET jack: Connect to the network with an ethernet cable.
6. REMOTE CONTROL jack: Connect an Onkyo product with an RI jack using the
included RI cable to synchronized with this unit. (P8)
7. AUDIO OUTPUT ANALOG jacks: Connect a pre-main amplifier with the included analog
audio cable.
180°
90°
> Before Start >PartNames > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
5
E
N
Remote Controller
1. Íbutton: Turns the unit on or into standby mode.
2. DIMMER button: Switch the display off or adjust the brightness of the display in two steps.
3. INPUT SELECTOR buttons: Switches the input to be played.
4. Play buttons:
:: Move to the track before the one being played.
/;: Play or pause play.
9: Move to the next track.
∫: Stop playback.
0Depending on the input, the operation may not start.
5. REPEAT button: Set repeat play.
SHUFFLE button: Set shuffle play.
6. CLEAR button: Used when entering text, etc
7. TOP MENU button: Move to the top menu of the selected input.
8. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.
9. SETUP button: Displays the setup menu.
10.
Amplifier control buttons
Use to switch the input, adjust the volume, etc., of an Onkyo pre-main amplifier.
0Operation may not be possible with some amplifiers.
11.
ÍAMP button: Switch an Onkyo pre-main amplifier between on and standby.
0Operation may not be possible with some amplifiers.
12.
DISPLAY button: Switches the information on the display.
13.
NOW PLAYING button: When you have changed the display during play, for example, this
button returns the display to show information about the file being played.
14.
button: Returns the display to the previous state.
022 and 11 are not used.
30° 30°
Approx. 5 m
6
> Before Start >PartNames > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
E
N
Display
1. ASb: Lights when "Auto Standby" (P22) is set to "On".
2. DSD: Lights when the audio signal being input is DSD.
3. Lights when remote controller cursor operations are possible.
4. Displays the play status.
5. DIMMER indicator: Lights when you have pressed DIMMER to turn the display off.
6. Message display: Displays information about tracks and menus.
0Characters that cannot be displayed on this unit are replaced with asterisks ( ＊).
0The following icons are displayed.
: Folder
: Track title
: Playing
: Paused
: Artist
: Album
: 1-track repeat
: Repeat within a folder
: Shuffle
0When DIMMER is pressed to turn off the display, the unit may appear the same as if you
had unplugged the unit from the power outlet, but electricity is still being supplied to the
unit. To completely cut the unit off from the power supply, you need to unplug the power
plug (shutoff device) unit from the power outlet.
ASb DSD
7
E
N
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Connections with an amplifier
Install
a
a
1
2
You can play the audio from network features such as
internet radio through speaker systems connected to pre-
main amplifiers or AV receivers. Connect to suit the input
jacks on your amplifier.
Connecting with an analog audio cable
The signal is converted to analog in the D/A converter of
this unit and then output to the pre-main amplifier. Connect
the LINE IN jacks on a pre-main amplifier with the included
analog audio cable to the AUDIO OUTPUT ANALOG jack
on this unit.
Connecting with a digital coaxial cable
The signal is converted to analog in the D/A converter of
the pre-main amplifier. Connect the COAXIAL IN jacks on a
pre-main amplifier with a digital coaxial cable to the AUDIO
1
2
NS-6130
a
b
OR
Integrated amplifier, AV receiver, etc.
a Analog audio cable, b Digital coaxial cable
8
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
E
N
OUTPUT DIGITAL COAXIAL jack on this unit.
Connecting with Onkyo RI Components
By connecting an Onkyo component with RI jack to the unit
by using an optional RI cable and an analog audio cable,
you can link the unit's power and input selection and enable
operation with this unit's remote controller. For details, refer
to the instruction manual of the component with the RI jack.
0Some components may not support all RI functions.
a
Amplifier
NS-6130
a RI cable
9
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
E
N
Connecting the power cord, etc.
a
1 2
a
Power cord connection
This model includes a removable power cord.
The power cord must be connected only after all other
connections are completed. Make sure you first connect the
power cord to AC INLET terminal of the unit and then
connect to the outlet. Always disconnect the outlet side first
when disconnecting the power cord.
Ethernet cable connection
To connect to the network with an ethernet cable, use the
ETHERNET jack. When using Wi-Fi connection, make
settings in initial settings (P10). You can enjoy features
such as internet radio and AirPlay by connecting to the
network.
a Power cord
10
> Before Start > Part Names > Install > Initial Setup >Playback
Supplementary information | Advanced Setup | Others
E
N
Power On & Initial Setup
Initial Setu p
1 2
Network Setup
Starting up: When you press Í, "Now Initializing..." is
displayed on the display. After this, when "Now Initializing..."
goes out, you can start operating the unit.
Wi-Fi connection settings
When you first turn the power on, the Network Setup screen
is displayed automatically, allowing you to easily make Wi-Fi
connection settings.
To set, select the item with the cursors on the remote
controller and press ENTER to confirm.
0To return to the previous display, press .
0Turn MENU/ENTER on the main unit to the left and right
to select the item, then press the dial to confirm.
1. Press ENTER when "Network Setup" is displayed.
2. To make Wi-Fi settings, select "Wi-Fi". If you have
connected with an ethernet cable, select "Wired(Exit)"
with / on the remote controller and press ENTER.
3. If you selected "Wi-Fi", select the setting method with /
Network Setup
Wi-Fi
Wired ( Exit )
Autres manuels pour NS-6130
1
Table des matières
Autres manuels Onkyo Lecteur multimédia
Onkyo
Onkyo MB-S1 Manuel utilisateur
Onkyo
Onkyo NS-6130 Manuel utilisateur
Onkyo
Onkyo NS-6170 Manuel utilisateur
Onkyo
Onkyo HT-R508 Manuel utilisateur
Onkyo
Onkyo MB-S1 Manuel utilisateur
Onkyo
Onkyo MB-S1 Manuel utilisateur
Onkyo
Onkyo DP-X1A Manuel utilisateur
Onkyo
Onkyo DP-X1 Manuel utilisateur
Onkyo
Onkyo FR-V77 Manuel utilisateur
Onkyo
Onkyo PR-SC5530 Guide d'installation
