Onida S123CUR Manuel utilisateur
The unit displayed is for representational purposes only. Actual unit may vary.
Model: S123CUR,S183CUR,S125CUR,S185CUR.
Warranty Registration System
Help us to serve you better by registering
your product for Warranty
Web Register at w
Telephone
Post / Visit Post the Warranty Registration Card &
ww.onida.com
Call Centre No. 0XX-39889000(0XX-STD Code of
State Capital)
Service Centre
Copy or Visit the Nearest Service Centre.
5 STAR 3 STAR
66129915056
IMPORTANT :
Please read this owner’s manual carefully and thoroughly
before installing and operating your room air conditioners.
Please retain this owner’s manual for future reference after
reading it thoroughly.
Dear Customer
Congratulation on buying ONIDA Air Conditioner.
Your Air Conditioner comes with ONIDA Guarantee of Quality
as detailed in the manual.
ONIDA takes great pride in providing its customers with state-
of-the-art products that adheres to international quality
standards.
ONIDA is committed to following quality policy laid by our
chairman and managing director Mr. G. L. Mirchandani.
“We are committed to quality and strive for continuous
improvement through innovation and human development to
give customer better value for money always”
ONIDA stands committed to provide the ultimate customer
satisfaction, as nothing brings us greater joy than having
satisfied customers of ONIDA.
At ONIDA, feedback and suggestions based on your product
usage experience is greatly appreciated.
Please contact to us at r[email protected]
Dr. Y. V. Verma
Chief Executive Officer
CONTENTS
Salient Features 1
Inside Overview 2
Indoor Unit Display 3
Remote Overview 4
Operations 5
General Instructions for Installation 10
Installation Sketch 13
Installation of Model 14
Take care of your Air Conditioner 17
Precautions to be taken 18
Trouble Shooting Chart 19
Installation and Satisfaction Report 21
Warranty Terms & Conditions 23
Preventive Maintenance Service Coupon 25
Warranty Card(Customer Copy) 27
Warranty Card(service Centre Copy) 29
SALIENT FEATURES
1
1.0T / 1.5T Split Air Conditioner
Model Code :
• Aesthetics:-
a) Unique Trendy Plus Panel
• Performance:-
a) High BTU, High Efficiency Compressor
b) Trapezoidal Inner Grooved Tube
c) Large L - Shaped Condenser Coil
d) High RPM Fan Motor with High Static
e) High Technology 3 Star Energy Efficient
• Features:-
a) Turbo Mode
b) Sleep Mode
c) Child Lock
d) Blow Operation
e) Full Function LCD Remote
• Safety & Reliability:-
a) Low Deration Factor
b) Hydrophilic Fins
c) 5-Stage Epoxy Polyester Painting
d) Rugged Construction With Thicker Gauge Steel
S123CUR / S183CUR / S125CUR / S185CUR.
Display on the indoor unit.
For the icon of LED windows, only relevant icons will light up with their displays on.
W R G
(Not applicable)
Power LED color indicator:
R
G
Mode LED color indicator:
W
White-W-Cool Mode-
Red-R-Heat Mode-
Notes: Heat Mode not available for this Model
Green-G-Dry
Mode-
Green-status-ON.
Red -status-OFF.
Display on the indoor unit
T
R
2
INSIDE OVERVIEW INDOOR UNIT DISPLAY
3
Remote controller
nINDOOR UNIT
nOUTDOOR UNIT
Connection
pipe and
connecting wire
Air in
Exhaust Air
Deflector
Display
Front panel Return warm Air in
Conditioned Air out
54
REMOTE OVERVIEW OPERATIONS
1. Open back cover and put 2 Nos. AAA size alkaline batteries.
2.When the button is pressed on remote, indoor unit will “beep” once, indicating
the receipt of signal. If no “beep” sound is heard, press the button once again.
3.Remove batteries if remote control has not been used for long time.
4.Direct heat mode is not available with all models.
Operating Your Air Conditioner:
Your Split Air Conditioner can be conveniently operated using the intelligent cordless
remote control.
1. Switch on the MCB.
Press ON/OFF button on remote handset to switch ON the AC.
The "RUN" light on Indoor unit will glow ON.
Your AC switches on with parameters that were set before power was
switched off. The unit receives the signal with "BEEP" tone and your AC starts
operation.
Time Delay: To protect the compressor, a time delay is incorporated in the
circuit. The Time Delay ensures that the compressor switches ON only after a delay of
about 3 minutes.
2. By Pressing the “MODE" button each time you can select either Auto, Cool, Dry, Fan
or Heat Mode.
3. Press the "FAN” button to set the fan speed.
Each press changes the fan speed from
Low-Med.- High-Auto Fan speed.
The selected fan setting symbol can be
seen on the LCD.
4. The Set Temp. is displayed on LCD.
5. To switch off the AC, press the
same ON/OFF Button.
Setting the Desired Room Temp.:
You can set the temp. at which you would like your room to be.
O
Press "+" button to increase the set temp. On every press, the temp. increases by 1 C.
O
Press "-" button to decrease the set temp. On every press, the temp. decreases by 1 C
The two digit display shows the changing set temp. on LCD
O
The setting temp. range is from 16- 30 C.
*Cooling capacity measured at Turbo speed, as per IS 1391:1992 Part 2
Note: Heat Mode is not applicable for this model.
OPER
LOW SPEED MEDIUM SPEED
OPER
HIGH SPEED
OPER
AUTO
OPER
AUTO SPEED
MODE
ADJUSTMENT
DISPLAY UNIT
SWING
TEMP
SLEEP
DISPLAY ON /OFF
TIMER ON
TIMER OFF
TEMPERATURE/
ADJUSTMENT
TIME
ON / OFF
CLOCK SETTING
FAN SPEED
TURBO
BLOW
BACK VIEW
76
OPERATIONS OPERATIONS
The AUTO Mode :
1. Press "MODE" button to cyclically step through the COOL, FAN,
DRY & AUTO modes and stop when AUTO mode is selected.
2. AUTO mode symbol can be seen on the remote display when you
select the AUTO mode.
3. In AUTO mode, the fan speed can be changed by pressing
FAN button.
4. In AUTO mode, the unit automatically runs at preset temp.
LIGHT Operation:
You can ON/OFF the LED DISPLAY on indoor unit by press “ LIGHT “ button on remote
control.
CLOCK Setting:
Press the “CLOCK” button on remote to set the real time clock, clock time will blink on
remote display. Press “+” or “-” keys to set the desired time. press again after setting to
confirm the change.
TIMER Operation:
You can program your split AC to switch itself ON or OFF at particular time.
Maximum set time is 24 hrs, with 1 min increment.
ON TIMER:
When the AC is "OFF" (in standby), press "TIMER ON" Button on remote to use this
feature as the ON TIMER. (make sure that MCB switch is "ON”
The "TIMER ON" symbol seen on the remote display.
For EXAMPLE:
Suppose you want to switch ON the AC at 08:00.
Press "TIMER ON" button, when AC is in OFF condition.
Press “+” or “-” buttons to set 08:00 to switch on AC. Press again
“TIMER ON” after setting the time to confirm Timer ON.
Display on Remote will show "TIMER ON”.
TIMER OFF FUNCTION:
When the AC is "ON", press "TIMER OFF" Button on remote to use this feature as
the OFF TIMER. The "TIMER OFF" symbol seen on the remote display.
For EXAMPLE:
Suppose you want to switch OFF the AC after 08:30. Press "TIMER OFF" button, when AC
is in ON condition.
OPER
TIMER ON
AUTO
OPER
Your split AC operates in one of four modes, COOL-DRY-FAN-AUTO. The modes button
cyclically chooses between the four operating modes.
The COOL mode:
In the cool mode, the compressor is in operation and your AC functions in the standard
operating mode, cooling your room to the desired set temp.
1. Press "MODE" button to cyclically step through the COOL, FAN,
DRY & AUTO modes and stop when cool mode is selected.
2. Cool mode symbol can be seen on the LCD panel when you select
the cool mode.
In this mode, you can change the temp. settings by pressing "+"
and "-” temp. buttons.
You can change the fan speed setting by pressing FAN button.
3. If the Room temp. is more than the set temp., then the compressor &
outdoor FAN will remain ON and perform the Cooling operation.
If the room temp. achieves the temp. less than set temp., then the
Compressor & Outdoor FAN will remain OFF.
The DRY Mode:
In the DRY mode, your AC reduces the humidity within the room faster.
1. Press "MODE" button to cyclically step through the COOL, FAN,
DRY & AUTO modes and stop when DRY mode is selected.
2. DRY mode symbol can be seen on the LCD panel when you
select the DRY mode.
3. Indoor FAN will run at low speed.
4. Set temperature can be changed.
The FAN Mode:
1. Press "MODE" button to cyclically step through the COOL, FAN,
DRY & AUTO modes and stop when FAN mode is selected.
2. FAN mode symbol can be seen on the LCD panel when
you select the FAN mode.
3. In FAN mode, only Indoor FAN will run at set speed and
Compressor & Outdoor Fan will remain off.
4. In this mode, you can change the Indoor FAN Speed.
OPER
OPER
OPER
98
OPERATIONS OPERATIONS
OPER
TIMER OFF
Press “+” or “-” buttons to set 08:30 to switch off AC. Press again
“TIMER OFF” after setting the time to confirm Timer OFF. Display
on Remote will show "TIMER OFF”.
CANCEL TIMER:
If you want to cancel the Timer what you set before. Press once
"TIMER ON” or “TIMER OFF" buttons, and it will cancel the Timer.
The "TIMER OFF” or “TIMER ON" display on LCD Panel of remote will goes OFF.
BLOW OPERATION:
To set on BLOW Operation, Press “BLOW” button on the remote controller. BLOW is
operational, when you turn off the machine the indoor fan will continue to run for a few
minutes before switching off. The purpose is to ensure that the evaporator is at the
same temperature as the indoor temperature.
TURBO OPERATION: To switch on the turbo operation press “TURBO” button on the
remote controller. In TURBO mode the unit will run at the maximum cooling with highest
Fan Speed. When pressing the MODE or FAN button, this function will be canceled.
CHILD LOCK Function: Press + and - keys on the remote controller simultaneously
to lock or un-lock the keypad. When the key pad is locked the lock icon will be
displayed on the remote controller LCD.
SLEEP Operation:
Press "SLEEP" button on remote to switch on sleep operation.
In "SLEEP" mode your air conditioner increases the temperature
O
by 1 C for every hour that it operates,
O
After 2 hours and after the increase in set temp. by 2 C your
AC maintains the same temp. at that level without further increase.
Under Fan and Auto modes, sleep function is not available.
To cancel the Sleep mode, press again the Sleep button.
TEMP Function:
Press once TEMP button, will show “ ” on remote display and set temp. will be
shown on unit display. Press again will show “ ” on remote display and unit will show
room temp. for 5 sec and again set temp will be displayed on indoor. Press again will
show “ ”on remote display and set temp. on unit display. Next press, unit will be out
of TEMP operation.
OPER
Air Flow direction Adjustment:
Your split AC has oscillating louvers for uniform cooling around your room.
You can stop the oscillation if you so desire.
Up/Down Air Direction Adjustment:
1. Press "SWING" button to set swing angle, which circularly
Changes as defined below:
OFF
Note: This remote controller is universal. If it receives three kind of following status,
the swing will remain original.
Left/Right Air Direction Adjustment:
Move manually, the left right air
louver at desired position as shown
in following figure.
Emergency Operation Switch:
In case the batteries in the remote are worn out, or remote is faulty or missing, use
Emergency operation switch (AUTO) to ON/OFF AC.
Every time the switch is pressed, it changes in sequence of COOL and STOP.
O
In Emergency operation mode the set temperature will be 25 C, Fan speed will be
Auto and Up/Down Air louvers are in swinging mode.
To access emergency switch, open the grill as
shown in the figure.
OPER
1110
GENERAL INSTRUCTIONS FOR
INSTALLATION
GENERAL INSTRUCTIONS FOR
INSTALLATION
Locating the indoor and outdoor units
properly will help optimise the performance of
your airconditioner. While your Onida /
Dealer's Technician will be happy to guide you
on the best location for your airconditioner,
here are a few helpful hints.
Locating the Indoor Unit
• Locate the IDU for the best cool air
circulation. Preferably, there should be
no obstructions nearby, as shown in the
adjacent figure.
• Do not locate the unit directly opposite a
door which is opened frequently. The
cold air will go out of the room each time
the door is opened, as shown in the
adjacent figure.
• All indoor units will form condensate water.
Please ensure that the condensate can
be drained out of the room to a toilet /
pantry, etc. The installation engineer will
make sure that a "U" bend is provided in
the drain to prevent insects from coming
into the room through the drain tube, as
shown in the adjacent figure.
Locating the Outdoor Unit
The outdoor unit houses the compressor,
condenser fan and electrical components.
The heat removed from the room is expelled
to the atmosphere through the outdoor unit.
Once again, the Onida / dealer's Technician
will ensure optimal installation of the ODU for
you. However, the following information will
be of interest to you.
• The Outdoor Unit can be mounted on a
wall, sunshade or skirting.
• Ideally, the ODU should not be too
far a w a y f r o m t h e I D U ; t h e
recommended distances are
marked in the adjacent figure.
• Ensure that air can pass freely through
the unit. Please allow at least 2 meters
free space on the air outlet side, and 0.3
meters on the air inlet side.
• If more than one ODU is to be installed,
they must be properly separated, so that
the warm air from the outlet of one does
not enter the inlet of the other.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Onida Climatiseur
Onida
Onida S09FLT-L3 Manuel utilisateur
Onida
Onida W12TRC3 Manuel utilisateur
Onida
Onida S12SPD-M3 Manuel utilisateur
Onida
Onida S12FLT-N5 Manuel utilisateur
Onida
Onida W182FLT Manuel utilisateur
Onida
Onida INV18SLU-C8 Manuel utilisateur
Onida
Onida INV18SMT7 Manuel utilisateur
Onida
Onida SI12TRD3 Manuel utilisateur
Onida
Onida S093SMH Manuel utilisateur
Onida
Onida INV18ELE7 Manuel utilisateur
