5USER MANUAL (H-C04)
•Only use the CO2 Jet if there are no people, animals or other objects
in the direction of the output within the output distance. The shooting directi-
on is the direction in which the output pipe on the CO2 Jet is pointed. The
output distance depends on the humidity in the air.
•Make sure that children, unauthorised people and animals do not obtain
access to the CO2 Jet.
•Safety devices may not be removed or disabled.
•All required safety devices must be in good condition and function properly.
•Ensure sufcient lighting of the surroundings.
•Keep the workplace clean.
•Only authorised persons may carry out work with the CO2 Jet.
7.PREPARATIONS
Unpack the CO2 Jet. Dispose of the packaging material without harming
the environment. Inspect the machine for any damage. If damage is noticed
this must be reported to us.
8.INSTALLS ILLUSTRATION
• Place the CO2 Jet on a solid and even surface,Always make sure that
there are no people within 3 metres of the CO2 Jet.
• In order to test it, you rst need to check if the gas valve on the CO2
bottle is still in a closed position. Now you can check if the has been installed
properly by switching the electricity on and off.if the system has been
connected properly you will hear a clicking sound which is produced by the
opening and closing of the magnetic valve in the CO2 Jet.
• Connect the high pressure CO2 hoses to the CO2 bottles.Firmly secure
the couplings by hand.Place the CO2 bottles (liquid CO2 with dip pipe) on an
even and solid surface.Place the bottles in such a position that the valve
