On-Hold Plus OHP-6000 Guide de démarrage rapide
Install the Driver/Update Utility
step
1
Install the IntelliTouch Driver host application by first downloading the
file from http://www.onholdplus.com/drivers/OHP6000_FW_v.2.001.zip.
Extract the file and double-click setup. Once the installation is
complete, InstallShield will prompt you to reboot the machine.
Put the Device in Recovery Mode
step
2
After the reboot, put your device in recovery mode by turning the
device on while holding the play button for 10 seconds. The player's
LCD will remain blank.
Run the Update Utility
step
3
Run the update utility from the start menu. Start - Programs -
IntelliTouch MP3 Player 6000 Series - MP3 6000 Series Update. At this
stage, a progress bar goes across the screen (which means that
firmware is being copied on the RAM).
Load the Firmware
step
4
Now, run the update utility for the second time. At this stage, the
updater GUI shows up. You should now run the GUI (hit 'start' on the
GUI) to load the firmware to the ROM. Note: that this 2nd step is
needed to write the configuration to permanent memory. If you
reboot after the first step, the firmware on the RAM is lost.
Windows 98 Installation
For technical support call (858) 320-6737
IntelliTouch Communications
5160 Carroll Canyon Road
San Diego, CA 92121
858-457-3300 FAX 858-457-3311
www.onholdplus.com
Autres manuels pour OHP-6000
2
Table des matières
Autres manuels On-Hold Plus Accessoires pour téléphone
On-Hold Plus
On-Hold Plus OHP-5500 Manuel utilisateur
On-Hold Plus
On-Hold Plus OHP-4500 Manuel utilisateur
On-Hold Plus
On-Hold Plus OHP-4500 Manuel utilisateur
On-Hold Plus
On-Hold Plus OHP 4000 Series Manuel utilisateur
On-Hold Plus
On-Hold Plus OHP-7500 Manuel utilisateur
On-Hold Plus
On-Hold Plus OHP-6500 Manuel utilisateur
On-Hold Plus
On-Hold Plus OHP-5000 Manuel utilisateur
On-Hold Plus
On-Hold Plus OHP-4500 Instructions de montage
On-Hold Plus
On-Hold Plus OHP-3000A Manuel du système
On-Hold Plus
On-Hold Plus OHP-7500 Manuel utilisateur
