Omnitracs SR4 Manuel utilisateur
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
Omnitracs SR4 Kenworth T680 & T880 Installation Guide
Manufactured by PACCAR Inc.
This VSA covers models manufactured between 2013-2023
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
Year Range SR4 Harness
Description SR4 SKU Cable Type
2013-2022 J-1939, 2 Pin TE
Yellow outside 104-0009-0010-00
2019-2023
If available
J-1939, 14 RP1226
(Kenworth, Peterbilt)
(grey connector with RED
label)
104-0009-0016-00
Cable Guide
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
Sensor Bar
Bottom A-pillar
Forward Cam
center windshield
Cab Cam
Right of Forward Cam
Keypad
Right of steering wheel
Forward Cam
center windshield
Cab Cam
Center headliner
Keypad
Left of steering wheel
Sensor Bar
Bottom A-pillar
Forward Cam
Right of split
Cab Cam
Right of Forward Cam
Keypad
Right of steering wheel
Forward Cam
Right of split
Cab Cam
Center headliner
Keypad
Left of steering wheel
Note: Any combination of these
mounting locations are approved
Flat windshield -Preferred locations
Split windshield -Preferred locations
Flat windshield -Alternative locations
Split windshield -Alternative locations
Approved camera mounting (flat/split windshield), sensor bar, and keypad locations
Sensor Bar
Bottom A-pillar
Sensor Bar
Bottom A-pillar
Sensor Bar
Middle A-pillar
Sensor Bar
Middle A-pillar
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
2013–2022
ECU and Wiring
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
Component Primary location
Controller Center Dash
ECU Port
Driver-side behind
instrument panel
J-1939, 2 Pin TE
Yellow outside
104-0009-0010-00
Behind pocket above
gas pedal
J-1939, 2 Pin TE
Yellow outside
104-0009-0010-00
Wiring
Constant,
True Ignition,
& Ground
Driver-side
Under dash at fuse box
1
Primary
11
FUSE
BOX
+12v Constant
+12v True Ignition
(Chassis) Ground
2013-2022 Approved controller, ECU, and wiring locations
2
IMPORTANT: 2 Pin connection is to be made on the V-CAN network for proper ECU data.
2
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
Spare BATT locations Wiring Locations
Constant Power
Butt connect to Spare upfitter plug labeled
BATT
Or Add-A-Fuse in slot G9 or G10
True Ignition
Butt connect to Spare upfitter plug labeled
IGN
Or Add-A-Fuse in slot K13, M13, or N12
Ground
Use a #10 ring terminal and connect to the
ground buss bar below fuse box
2013-2022 : Wiring connections
Upfitter block
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
2013-2022 Fuse box diagram
Fuse box labels
If using a Spare upfitter connection, a fuse will need to be
installed in the corresponding location.
-
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
Component Notes
2-Pin TE
(yellow outside) Connect to V-CAN Network
Description
SR4 Part # 104-0009-0009-
00 J-1939, 2 Pin TE (yellow outside)
Network Black and Yellow (Yellow) grommet color indicates TE Connector
Baud Rate J1939 Vehicle Bus Communication Network - (Passive)
Connection Type 250kb, 500kb •Supports (250kb) Low speed and (500kb) High speed
•(250kb) Best Connection for 3rd Party Devices
2013-2022 Splice Pack Data Link Connection (DLC) locations
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
2018-2023 RP1226 Connection if available
ECU and Wiring
Kenworth T680 & T880
COMPANY CONFIDENTIAL
COPYRIGHT © 2022 OMNITRACS, LLC. ALL RIGHTS RESERVED. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Rev 7, August 24, 2022
Component Primary location
Controller Center Dash
ECU Port
J-1939, 14 Pin PACCAR
(Kenworth, Peterbilt)
(grey connector with RED label)
Driver-side near fuse panel
Center Dash via passenger-side panel
Wiring
Constant, True
Ignition, & Ground
Passenger-side
Fuse box
FUSE
BOX
+12v Constant
+12v True Ignition
(Chassis) Ground
1 2
2018-2023 Approved controller, ECU, and wiring locations
1
2
Autres manuels pour SR4
1
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Omnitracs Accessoires automobiles
