Omnicall ONE Manuel utilisateur

One GSM
User Manual
Release 4.0

PRECAUTIONS 3
SECURITY INFORMATIONS 3
CE CONFORMITY DECLARATION 4
ASSISTANCE & CONTACTS 4
1. INTRODUCTION 5
1.1 Description 5
1.2 Specifications 5
1.3 Connections 6
1.4 Models 7
2. INSTALLATION 9
2.1 Inserting the SIM card 9
2.2 External antenna connection 9
2.3 Power supply 10
2.4 First start 10
3. CONFIGURATION 11
3.1 Commands Introduction 11
Switches A 12
Switches B 13
Switches C 14
Switches D 15
Switches E 16
Switches F 17
Calling cycles 18
Call Timoeout 19
External Ringtone 20
Switch advanced functions 21
Timeout between calls 22
Switch Lock 23
Switch test 24
Single number erase 25
Reset numbers 26
Password 27
Gate opener 28
Manual balance due request 29
Balance due operator selection 30
Balance due auto SMS 31
TABLE OF CONTENTS
Balance due’s receiving number 32
Leanguage 33
Audio profile 34
Speaker volume 35
Microphone gain 36
Signal quality 37
Relay 1 activation 38
Relay 2 activation 39
Relay 1 closing time 40
Relay 2 closing time 41
Command’s single information 42
Command’s total informations 43
4. LOG FIRMWARE VERSIONS 47
5. TROUBLESHOOTING 48
6. WARRANTY CERTIFICATE 49
7. ASSISTANCE REQUEST 51

It’s forbidden to reproduce any part of this manual in any form without the express written consent of
OMNICALL srl.
The contents of this manual may be changed without notice. Every care has been taken in the collec-
tion and verification of the documents contained in this manual, however the OMNICALL Srl. can not
assume liability resulting from its use. All other brands, products and trademarks are the property of
their respective owners.
SECURITY INFORMATIONS
Carefully read the instructions and rules in this manual before powering up the device. Breaking the
rules may be illegal and could create a hazard.
The company assumes no responsibility if the customer fails to comply with the following standards.
For each of the situations you should refer to the regulations and rules. This device is a radio transmit-
ter and receiver low power. When it is operating, it sends and receives radio frequency energy (RF).
The device produces magnetic fields, for this reason should be kept away from magnetic media such
as floppy disks, tapes, etc..
Operation of this equipment near electrical and electronic devices such as radios, telephones, televi-
sions and computer can cause interference.
INTERFERENCES
This device, like all wireless devices, is subject to interference, which could affect the performan-
ce of the device.
USE ON CAR
Do not use the device if you are driving. In the case of use on cars, it is necessary to check whe-
ther the vehicle electronics are protected against RF. Do not install the device in space that would
occupy the airbag inflating.
USE ON PLANE
Turn off your device when in an aircraft. The use of GSM on aircraft is illegal.
USE INSIDE HOSPITALS
Turn off the device near medical equipment, in particular, may cause interference with pacema-
kers and hearing aids. Place the utmost care in the use of the device in hospitals and health
centers, as it is possible to use devices that are sensitive to external RF energy. Health cen-
ters,where specified, the device must be taken off.
USE IN PROXIMITY OF BLASTING MATERIALS
Do not use the equipment in fuel depots, chemical plants or in areas characterized by the presen-
ce of explosive gases or where blasting operations are in progress. You will need to observe
restrictions and follow any rule or provision.
MODALITY OF USE
Do not use the device in contact with the human body, do not touch the antenna unnecessarily.
Use only approved accessories. Refer to the manuals of any other devices to connect to this
device. Do not connect incompatible devices.
PRECAUTIONS
In order to safeguard the security, the safety of the operator and the operation of the apparatus, the
following rules must be observed for the installation. The system, including cables, in area free from:
Dust, humidity, heat and direct exposure to sunlight.
Objects that radiate heat. These could cause damage to the container or other problems.
Objects that produce a strong electromagnetic field (Hi-Fi speakers, etc.).
Liquids and corrosive chemicals.
ENVIRONMENTAL CONDITIONS
Ambient temperature -15 ° C to +55 ° C Relative humidity 20 to 80% n.c.
Cleaning apparatus
Use a soft dry cloth without the use of solvents.
Vibration or shock
Be careful not to cause vibration or shock.

INFORMATIONS FOR USERS
According to article 13 of Legislative Decree 25th July 2005, 151 "Implementation of Directives
2002/95/EC and 2003/108/EC on the reduction of use of hazardous substances in electrical and elec
tronic equipment, as well as to waste disposal ".
The crossed bin symbol on the appliance or on its packaging indicates that the product at the
end of its life must be collected separately from other waste.
The user must therefore dispose of the equipment at the end of its useful life separate collec-
tion of electronic and electrical waste, or return it to the dealer when buying a new equivalent
product, on a one to one .
The separate collection for the subsequent forwarding of recycling, treatment and environmentally
compatible disposal helps to prevent negative effects on the environment and health and supports the
reuse and / or recycling of the materials they are made of the equipment.
Illegal dumping of the product by the user involves the application of administrative sanctions provided
by law.
DECLARATION CONFORMITY
Omnicall s.r.l. Via Pietro Bembo, 41123 Modena - Italy- declares under its sole responsibility that the
product name Omnicall ® ONE GSM to which this declaration relates, meets the essential require-
ments of the Directive indicated below:
1999/5/EC of 9th March 1999, R & TTE, (on radio equipment and telecommunications terminal equi-
pment and the mutual recognition of their conformity) of Legislative Decree dated May 9th, 2001, 269
(OJ 156 of 07 / 07/2001). As designed in compliance with the requirements of the following standards
or reference to other documents:
EN 301 511
EN 301 908-1
EN 301489-01
EN 301489-07
EN 60950-1
CONTACTS AND ASSISTANCE
Most of the problems can be solved by referring to the Support section> FAQ on our website
www.omnicall.it.
If, after a careful reading of the procedures described herein, you are unable to remedy a problem,
please contact support Omnicall.
E-mail: assistenza@omnicall.it
It’s possible to print the form "ASSISTANCE REQUEST" by downloading it from our website
www.omnicall.it in the Support section> Warranty Repair Service, or using the form on this
manual.

1. INTRODUCTION
Thank you for your confidence in buying a product Omnicall.
In this manual you can find information to install your intercom system quickly and easily.
1.1 Description
Omnicall ONE is a GSM intercom system, able to make audio calls in handsfree mode, with phone
numbers of mobile and fixed network with the push of the buttons.
Thanks to 2 relays, mounted on board, you can remotely control the opening of a door or a gate,simply
typing (in conversation) the key for relay 1 anf the key for relay 2 from the keypad of your phone.
In addition,with the dedicated serial port, you can do firmware upgrades by downloading from the web-
site www.omnicall.it in the "download" section, in order to have a product that is always updated with
new features.
With SMS messages, finally, you can plan, manage and ask for information about the selected parame-
ter.
1.2 Specifications
Up to 8 call buttons
Memory up to 40 phone numbers
Repeats Call up to 9 (loop sequence)
Call sequence can not be changed
Minutes of talk time up to 9 (automatic hang-up)
Excludable buttons
External audio can be disabled until the call is
System password variable
Test buttons
Relays Test
External audio adjustable
Sending and receiving SMS
GSM / GPRS Quad Band 900/1800 MHz
SIM card slot Push-Push, Model Plug-In 3V & 1.8V
Lights: Power and status
Weight: 450gr
Dimensions: 207 x 98 x 24mm
Temperature range: -15 ° C / +55 ° C
Degree of protection: IP54 (without canopy) - IP55 (with sunroof)
Power supply: 5Vdc max.
Consumption: 30mA (standby) - 350mA (calling)

1.3 Connections
FRONT VIEW

BACK VIEW

BUTTONS CONFIGURATION

1.4 Models and accessories

Table des matières

















