
28-0335 Rev. B
Control Panel LEDs
Disk Drive LEDs
Omneon Technical Support: +1 888 673 4896 (Americas), +65 6542 0050 (Asia Pacific), + 44 1252 555 450 (EMEA),
+7 495 506-5981 (Russia, CIS), +81 3 5565 6737 (Japan), +86 10 8391 3313 (China, mainland)
LED State Description
OPEN
Activity
Rapid blink
(4 per second)
LED State Description
Slow blink
(1 per second)
Two rapid blinks Drive is being rebuilt or repaired.
then pause
Off Drive state is normal. Drive is being
used by the ContentStore.
Off No power is being provided to the drive.
Red Solid
(Status)
Blinking Drive activity.
*This LED applies only to fans controlled by the chassis.
Drive has failed.
Drive is not being used by the
ContentStore.
Drive is being winked.
Status
1 Power
2 SAS-Out
3 Power Fail
4 Heartbeat
5 SAS-In
6 Overheat/
Fan Fail*
Solid
Solid
Solid
Flashing
Solid
Flashing
Solid
Power is being supplied to the
power supply units.
SAS output port is connected.
A power supply module has
failed.
Power is being supplied to the
server board.
SAS input port is connected.
Fan failure has occurred.
Requires immediate attention.
Indicates overheat condition.
NOTE: For descriptions of all ContentStore 3160 LEDs, refer to the Omneon MediaGrid Installation and Configuration Guide.
Left Control Panel
Right Control Panel
1
2
3
4
5
6
Solid Drive is powered on.
Green
(Activity)