Omconnect OX Manuel utilisateur
USER MANUAL
Smart Safe OX & OX Pro
What’s Included
P. 1
Smart Safe OX x 1 Mechanical Key × 2
M6 Screw Driver × 1
M6 Wall-Mount Screw × 2
Reset Tool × 1
Hello Card × 1
Specification
Model
Unlock Mechanism
Battery
Material
Bluetooth, PIN Code, App, Mechanical Key
P. 1
OX & OX Pro
Galvanized steel
4×AA Battery
P. 2
285mm
400mm
300mm
Lock&Unlock
Emergency
Battery
Mobile Control
Burglar Alarm
Administrator Unlock
.......
User Unlock
This Smart Safe allows to add up to 200 user PIN
codes for your family and friends.
Bluetooth Unlock Remote Sharing
Mobile Administrator
With your Mobile app you could unlock the Safe by
swiping the to the right.
You could generate offline code through mobile App and
let your friends and family access the Safe.
Set Administrator PIN Codes on your Mobile to
unlock, add members, delete members, etc.
Battery Life
The battery lifetime will be 12 months for operating.
Low Battery
When the batteries run out of power, system
will remind you to replace the batteries.
When the power is down, we can use
Mechanical Key to open the Safe.
Emergency Unlocked
Set a Master Administrator PIN for Unlocking,
settings, operations etc. And only the administrator
could change the administrator PIN code.
System Lockdown
The lock will be lockdown for 5 minutes
if continuously enter wrong passwords for 5 times.
AA A
AA A
AA A
AA A
Low Consumption
BLE broadcasting turns to sleep mode if no
operation.
The alarm will be activated if anyone attempts to destroy the Safe,
and the High decibel buzzer will be turned on.
Features
P. 2
P. 3
>. Please use the 2 mounting screws to fix the safe on your wall or cabinet.
Installation
Reset Button
P. 3
P. 4
Quick Start
Step 1>Install Battery
>. Put 4 × AA Battery into the battery dock.
Step 2>Download Mobile App
P. 4
P. 5
Activate Bluetooth to enter pairing mode
Step 3>Add Device
>1. Scan QR Code below to download the App and turn on your mobile Bluetooth. You can also choose to download other App
supported by Tuya.
> 1. Tap + 9 + + admin code + , when you see the light slowly blinks in blue then you are ready to pair
P. 5
P. 6
>2. Go to App Home page, click “Add Device” or click “+” on the upper right.
P. 6
P. 7
>3. You will see the detected device and click “Go to add”.
P. 7
P. 8
>4. Connecting, you need to wait for a few seconds to let it finish.
>5. Device added
>2. Right after the 2 beeps please key in:
Initial admin code+ + new admin code+ +new admin code again+ , when you hear a long beep with green light the admin
code has been changed.
P. 8
P. 9
Administrator is required to reset the admin code before adding other user codes.
Step 4>Change Admin Password-Initial Admin Password:123456
>1. Tap and hold for 3 seconds and release, you will be hearing 2 quick beeps.
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Sûr populaires d'autres marques
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur
Hornady
Hornady SnapSafe Trunk Safe II Manuel utilisateur
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuel utilisateur
Honeywell
Honeywell 5912 Manuel utilisateur
Phoenix
Phoenix FS1280F Manuel utilisateur
Phoenix
Phoenix SS0992K Fiche d'information produit
