OM ONE
STEREO PAIRING INSTRUCTIONS
SAFETY STUFF
Now you are about to learn something really cool about the Om One Levitating Blue Tooth Speaker. If you
have two of them they can be paired together so they will play in a mode called “True Wireless Stereo”. To
pair them together in this mode you will need to follow these instructions.
• First you need to pair one of the Speakers to a source device as described in the “Setup” section of this
User(s) Guide.
• Once you have one of the Speakers paired to the source device you need to shut off the Blue Tooth
controls on the source device. Usually there is a small switch on the source device in the Blue Tooth
menu that shuts off the Blue Tooth controls. Don’t worry, when you come back and turn these controls
back on the Om One will still be one of the available devices.
• When the Blue Tooth controls are shut off the Om One Speaker will go back to the pairing mode.
Take the Speaker in your hand and shake it from left to right one time. You will hear a ring tone
from the Speaker.
• Now turn on the second Speaker. Follow the instructions in the “Setup” section of this User(s) Guide to
turn the unit on. When you hear the narrator say “Power On” “ Pairing”, shake the Speaker from left to
right one time. You will hear the same ring tone as before. You may hear the ring tone a few times from
both Speakers as they search for each other. Try to hold the Speakers a few inches from each other
during this process so they can find each other.
• After a few ring tones the Speakers will find each other. When they do the narrator will say “Left
Speaker” from the Speaker you first paired to the source device. And from the second Speaker the
narrator will say “Right Speaker”. Now the two Speakers are paired together.
• After the two Speakers are paired together, you will need to go back to the source device and turn the
Blue Tooth controls back on. When they are turned back on you need to locate the Om One on the list
of available devices and select it again so that the source reconnects to it.
• When the source device reconnects to the Om One you can start to play audio output from the source
device just as before, except now the two Om One Speakers will play in stereo (left and right channels).
• There will also be a battery level indicator on the source device showing the battery level of the Om One.
This indicator only indicates the battery level on the left speaker. There is no battery level indication for
the right speaker, however if the right speaker reaches a 20% battery level the narrator on the right
speaker will say “battery low”. This message will be repeated for every 5% of battery level remaining just
as before in the section for battery life and recharging.
Here is all the legal mumbo-jumbo about electrical safety.
1. Do not take the Base Station into the bathtub with you when it is plugged in. That would be bad for you
and the Base Station.
2. Do not take the Speaker into the bathtub with you. It is not designed to go swimming and will not work
too good if it fills up with water.
3. Do not put the speaker in the oven. It is not made to be used in extreme temperatures.
4. Try not to drop the speaker from a height greater than 48”. It might not work too well if it is repeatedly
dropped from high places.
5. The Base Station electronics actually run off of a 12VDC supply. Please only use the power cord we
have provided. Using an alternative power cord may damage the Base Station and prevent the
Levitation Circuits from working. If you lose the power cord please contact us and we will be happy to
send you a new one.
Legal Stuff: We are required to tell you this stuff or the lawyers will have a tantrum.
Levitation Arts U.S. Patents 7348691, 7505243. Additional patents issued or pending in other countries.
