OLT 8x8 Pine SpaceMaker Manuel utilisateur

8x8 Pine

SpaceMaker

Assembly Manual

Version 5

Oct 21, 2010

Thank you for purchasing

an 8x8 Pine SpaceMaker

Shed. (with Western Red Cedar

Trim Accents)

Please take the time to

identify all the parts

prior to assembly.

Safety Points and Other Considerations

Our products are built for use based on

proper installation and normal residential

use, on level ground. Please follow the

instruction manual when building your

shed and retain the manual for future

maintenance purposes.

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the

snow off the roof(s).

-if the product is elevated, any structural and building code requirements are solely the customer's

responsibility, and should be abided by.

-in high or gusty wind conditions it is advisable to keep the structure securely grounded.

-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

Customer agrees to hold Outdoor Living Today Partnership and any of our Authorized Dealers

free from any liability for improper installation, maintenance and repair.

In the event of a missing or broken piece, simply call the Outdoor Living Today

Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your

purchase. It is our commitment to you to courier replacement parts, free of charge,

within 10 business days of this notification. Replacement parts will not be

provided free of charge after the 30 day grace period.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 1

Parts List:

A. Floor Section

2 - 45 1/2” x 75” - Floor Joist Frames

2 - 45 1/2” x 21” - Floor Joist Frames

2 - 45 1/2” x 75” - Plywood Floor - Large

2 - 45 1/2” x 21” - Plywood Floor - Small

4 - 1 1/2” x 3 1/2” x 72” - Floor Joists

5 - 1 1/2” x 3 1/2” x 60” & 31” Floor Runners

B. Wall Section

5 - 45 1/2” x 75” - Wall Panels - (Walls with Bottom Plates Unattached)

1 - 45 1/2” x 75” - Window Wall Panel

2 - 12” x 73” - Narrow Wall Panel

5 - 1 1/2”x 2 1/2” x 45 1/2” - Bottom Wall Plates

1 - Window Insert

Door Jambs & Header

2 - 1 1/2” x 3” x 73” - Vertical Door Jamb

1 - 2” x 3” x 78” - Door Header

2 - 2” x 3” x 6 1/2 - Door Header End Plates

1 - Left Side Door

1 - Right Side Door

2 - 2 1/2” x 1/2” x 72” - Interior Vertical Door Stops

1 - 2 1/2” x 1/2” x 68” - Interior Top Horizontal Door Stop

1 - 2 1/2” x 3/4” x 62 1/2” - Door Threshold

1 - 2 1/2” x 3/4” x 71” - Interior Door Flange

Gable Walls

4 - Gable Half Walls - Triangular Shaped

Top Wall Plates

6- 3/4” x 2 1/2” x32” - Front & Rear Top Plates Side Top Plates

(2 pieces Angle cut on end, 1 piece straight cut both ends)

2 - 3/4” x 2 1/2” x 86” - Side Top Plates (Angle cut on edge)

C. Rafter and Roof Section

12- 1 1/2” x 3 1/2” x56 1/2” - Roof Rafters with angled ends

2 - 3/4” x 4 1/2” x 57 1/2” - Roof Ridge Boards

2 - 3/4” x 4 1/2” x 33 1/2” - Roof Ridge Boards

2 - 1/16” x 3” x 7” - Metal Ridge Board Connectors

4 - 1/2” x 4 1/2” x 45 1/2” - Soffits

2 -3/4” x 3 1/2” x 72” - Roof Gussets - (angle cut on ends)

2 - 5/8” x 72 1/4” x 48” - Plywood Roof

2 - 5/8” x 72 1/4” x 9 1/4”- Plywood Roof

2 - 5/8” x 26 3/4” x 48”- Plywood Roof

2 - 5/8” x 26 3/4” x 9 1/4”- Plywood Roof

D. Miscellaneous Section

Bottom Skirting

8 - 1/2” x4 1/2” x 45 1/2” - Side Bottom Skirting

Corner & Sidewall Trim

6 - 1/2”x 2 1/2” x 79” - Narrow Trim

4 - 1/2” x 2 1/2”w x 75” - Filler Trim

4 - 1/2” x 4 1/2”w x82” - Wide Trim

4 - 1/2” x 3 1/2”w x 44” - Horizontal Gable Trim

3 - 1/2” x 2 1/2” x 77 1/2” - Narrow Trim (Front and Rear Wall)

Facia Trim

4 - 3/4” x 3 1/2” x 58” - Front and Rear Facia

(Angle cut on ends - 2 right / 2 left)

4 - 3/4” x 3 1/2” x 49 1/2” - Side Facia

**Miscellaneous Pieces

1- Flower Box

2- Pentagon Facia Plate

4 -Facia / Trim Detail Plates

1 pc - Spare Wall Siding

2 pc - Cedar Shingles used for Shims

Hardware Package

2 1/2” Screws

2” Screws

1 1/2” Screws

1 1/4” Screws

1 1/4” Finishing Nails

3/4” Screws

2 - Door Pull Handle

1 - Exterior Barrel Bolt - Black

1 - Interior Cane Bolt - Black

8 - Simpson Strong Tie Rafter Connectors - angled

6 - Black Tee Hinges for Door with 3/4”screws

2” long Black Screws for Hinge / Doorway Seam Trim

Tools Required:

Work Gloves and Safety Glasses

Screw Gun with square drive and star bits

Level

2 Large Ladders

Hammer

Wood Clamps

Thank you for purchasing a 8x8 Pine SpaceMaker Shed

(with Western Red Cedar Trim Accents).

Please take the time to identify all the parts prior to assembly.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 2

A. Floor Section

Plywood Floor

Large (2)

Floor Joist

Frames

Large (2)

Floor Runners (10)

Plywood Floor

Small (2)

Exploded view of all parts necessary to complete

Floor Section. Identify all parts prior to starting.

Note, Floor Footprint is 96” wide x 91” deep.

Concrete Pad

(optional foundation method)

Floor Joist

Frames

Small (2)

1. Lay out Large Floor Joist Frame and 2 Floor Joists as illustrated above. Position Joists

equally in Floor Joist Frame. Use Small Floor Joist Frame as a template to determine joist position.

Position Joist so flush with framing.

Flush

with

framing

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 3

96”

5. Complete all large and small frame attachments. Screw

each completed section together with 8 - 2 1/2” screws. 6. When completed, your floor footprint

should be 96” wide x 91” deep.

91”

3. Lay out Floor Joist Frames as

illustrated at left. There are 2 larger and

2 smaller Frame Sections. The Footprint

for the floor when attached together will

be 96” wide x 91” wide.

4.Attach each large and small floor joist frames

together with 6 - 2 1/2” screws per section.

2. When correctly positioned, attach each Joist with 4 - 2 1/2” screws (2 per end).

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 4

Note: The floor will be flipped over and floor

runners will sit on your foundation. It is

important to note that having a level

foundation is critical. Choosing a foundation will

vary between regions. Typical foundations can

be concrete pads or patio stones positioned

underneath the floor runners.

10. With Floor Runners attached, carefully flip the

floor over and place on your foundation.

Caution- you will need 2 people to assist you. Be

careful when laying floor down not to bend or twist

floor. When in place, level floor completely.

Concrete Slab

Foundation

Foundations

7.Attach Floor Runners to completed floor

frame. There are 2 floor runners per 91” side and

5 completed runners in total. Use 3 - 2 1/2”

screws per Runner.

8. Make sure Runners are flush with outside and

front and rear floor framing but not overhanging.

9. Complete all Floor Runners.

11. Position Plywood

Floor pieces (4) on top

of completed floor joists.

Plywood will sit flush with

outside of floor joist

frame.

Front

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 5

Hint: Use a chalk line

to mark location of

floor joists to

determine screw

placement.

12 . With Plywood

positioned correctly on

floor framing, attach

with 1 1/4” screws.

Use screws every 16”.

B. Wall Section Exploded view of all parts necessary to complete

the Wall Section. Identify all parts prior to starting.

Window Wall

Panel (1)

Side Top Plates

(1 per side)

Angle cut on edge

Front and Rear Top

Plates (3 per side)

2 Angle cut on 1 end and 1

square cut.

Gable Walls (4)

(2/side)

Door Jambs

Narrow Wall Panels (2)

12” wide

Solid Wall

Panel (5)

Door Header

Bottom Wall Plate

13. Starting with Solid Wall Panels, carefully lay panel face down. Position and attach Wall

Plate to bottom of wall studs of each wall panel with 6 - 2 1/2” screws. Position so plates are flush

with framing. Note, some Bottom Wall Plates may already attached to some Solid Walls.

Window Insert

(1)

Door Header

End Plates

(2)

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 6

14. Lay out all the wall

panels and become familiar

with their location.

On Standard Kits, there is

1 Window Wall Panel,

5 Solid Wall Panels and

2 Narrow Wall Panels.

Make sure to position panels

right side up so water is

directed away from and not

into shed. Look at window

wall panels to determine

proper wall position to

confirm.

15. Starting at Rear Corner, position a Solid Wall Panel on

top of plywood floor. The Wall Panel bottom framing will sit

flush with plywood. Wall siding will overhang the floor.

Important:

Make sure all walls are aligned in their

upright position. If not ,water may leak into

your shed. Unsure if panel is facing up or

down? check siding on window wall panel

to match alignment.

16.The side wall panels will sit flush at the end

of the plywood floor with the front and rear wall

panels sandwiched between them.

Note: Siding will overhang the floor by approx.

1/2” Outside 2x3 framing of wall panel

is flush with outside of plywood

when properly aligned.

Side Wall Panel

Front

Rear of Shed

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 7

19. Start positioning and securing wall panels around your floor. Attach wall studs together as per

Step 17. Be sure that rear wall panels fit between the side wall panels (sandwiched)

Do Not Attach Walls To

Floor until Step 28.

17. Position side solid wall into

place on plywood floor. Butt both

vertical wall studs of side and rear

walls together and attach with

3 - 2 1/2” screws. Screw at the

bottom, middle and top of stud to

secure properly.

Rear Wall Panels

Rear Solid Wall

Side Solid Wall

18. With the corner wall

attachment complete, position

a second rear wall panel in

place so bottom 2x3 wall

framing is sitting flush with

outside floor joists and

plywood floor. Wall siding

should overhang floor by

approximately 1/2”

When positioned correctly,

attach both rear wall panel

studs together as per Step 17.

Rear Solid Wall

2x3 wall framing flush

with outside of plywood.

Side Wall Panel

Rear Walls

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 8

23. Locate Narrow Wall Panels. Aligned 1st

Panel in front right corner so bottom wall framing

is sitting flush with floor. Attach to Side Wall

framing as per Step 17.

21. Position and attach right side Wall as Per Step 17.

22. Position and attach right side Window Wall

Panel as Per Step 17.

Front of Shed

Wall panel will

sit flush with

end of

plywood in

Front of shed.

24. Position and attach 2nd Narrow Wall Panel to left side wall stud with 3 - 2 1/2” screws as per Step

17. Note, Narrow Wall are 73” high (2” shorter than wide walls). Siding will overhang floor by approx 1/2”.

20. Left Side Wall flush with end of

Plywood in Front of Shed.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 9

25. In the next steps, the Door Header is attached. There are 2 short and 1 long 2” X 3” pieces . Start

by attaching both short end pieces using 2 - 2 1/2” screws. Screw from top down into wall framing.

26. Position and attach the longer Door Header to wall framing when Header is sitting flush with

inside of wall framing and against shorter Door Header end pieces. Attach with 4 - 2 1/2” screws.

Sits flush with inside

of wall framing

27. Locate both Vertical Door Jambs and position flush against front narrow wall stud. The Jamb is 3”

wide and will sit flush to outside of wall siding. When positioned correctly, secure Jamb using 4 - 2 1/2”

screws. Complete both sides.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 10

Table des matières

Autres manuels OLT Maison de jardin

OLT

OLT T&G Manuel utilisateur

OLT

OLT FL Bevel Manuel utilisateur

OLT

OLT CB128-AK-METAL Manuel utilisateur

OLT

OLT GS124-SLIDER-CEDAR-AK Manuel utilisateur

OLT

OLT SS84-SLIDER-METAL-AK Manuel utilisateur

OLT

OLT CB128-SLIDER-METAL-BEV Manuel utilisateur

OLT

OLT CB128-FJ-PLY Manuel utilisateur

OLT

OLT SunShed SSGS1216-AK-Ply Manuel utilisateur

OLT

OLT 12x8 Cabana Garden Shed Manuel utilisateur

OLT

OLT 12x8 Cabana Manuel utilisateur

OLT

OLT 12x16 SunShed Manuel utilisateur

OLT

OLT 12x16 Sunshed Garden Manuel utilisateur

OLT

OLT GS84-SLIDER-METAL-AK Manuel utilisateur

OLT

OLT Santa Rosa SR812-FJ-Cedar Manuel utilisateur

OLT

OLT SSGS1216-FJ-Ply Manuel utilisateur

OLT

OLT GardenSaver GS124-SLIDER-METAL-FJ Manuel utilisateur

OLT

OLT 6x6 Maximizer Storage Shed Manuel utilisateur

OLT

OLT STU128-Metal Manuel utilisateur

OLT

OLT STU128 Manuel utilisateur

OLT

OLT CB128-SLIDER-PLY-AK Manuel utilisateur

OLT

OLT Garden Chalet 4x2 Manuel utilisateur

OLT

OLT SpaceSaver SS124-SLIDER-METAL-AK Manuel utilisateur

OLT

OLT GC42-FJ-CEDAR Manuel utilisateur

OLT

OLT SR812-FJ-Ply Manuel utilisateur

Manuels Maison de jardin populaires d'autres marques

Mercia Garden Products

Mercia Garden Products 0628LOG181-V4 Manuel utilisateur

Lemeks

Lemeks Palmako PA120-5930-6 Manuel de l'installateur

Gartenhaus-King

Gartenhaus-King Valery Manuel utilisateur

Rion

Rion Hobby Gardener Manuel utilisateur

POD

POD Camping 480 Manuel utilisateur

Select

Select ISAAC E9682 Manuel utilisateur

Mercia Garden Products

Mercia Garden Products 01DTSHPWOR1010DDOW-V4 Manuel d'instructions

Palmako

Palmako Saale Manuel utilisateur

Lemeks

Lemeks Palmako Kira EL16-3623 Manuel de l'installateur

Mercia Garden Products

Mercia Garden Products 0644LOG186-V4 Manuel d'instructions

Palmako

Palmako Roger FR44-5953-2 Manuel utilisateur

Mercia Garden Products

Mercia Garden Products 03DTSHHP1206HGD4MW-V1 Manuel d'instructions

WAR-LOCK

WAR-LOCK GARDENSHED Skillion Series Manuel utilisateur

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Manuel utilisateur

G21

G21 Boston 882 Manuel utilisateur

Lemeks

Lemeks Palmako Grace PM56-4529 Manuel de l'installateur

Mercia Garden Products

Mercia Garden Products 03WES0808-V1 Manuel d'instructions

Shire

Shire Salcey Manuel utilisateur