Olivetti D-Copia 4003MF Manuel utilisateur

SERVICE MANUAL

Multifuction Digital Copier

d-Copia 4003MF / d-Copia 4004MF

d-Copia 4003MF Plus / d-Copia 4004MF Plus

d-Copia 5004MF / d-Copia 6004MF

Code: Y116540-5

PUBLICATION ISSUED BY:

Olivetti S.p.A.

Gruppo Telecom Italia

Via Jervis, 77 - 10015 Ivrea (TO)

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BAT-

TERIES ACCORDING TO THE INSTRUCTIONS.

It may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste

officials for details in your area for proper disposal.

ATTENTION

IL Y A UN RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN MODELE DE TYPE

INCORRECT. METTRE AU REBUT LES BATTERIES UTILISEES SELON LES INSTRUCTIONS DONNEES.

Il peut être illégal de jeter les batteries dans des eaux d’égout municipales. Vérifiez avec les fonctionnaires

municipaux de votre région pour les détails concernant des déchets solides et une mise au rebut appropriée.

Notation of products in the manual

For the purpose of this service manual, products are identified to the following type.

d-Copia 4003MF (40 ppm -LED -without FAX) : 40LOlivetti model

d-Copia 4004MF (40 ppm -LED -with FAX) : 40LF Olivetti model

d-Copia 4003MF Plus (40ppm -HyPAS -without FAX) : 40H Olivetti model

d-Copia 4004MF Plus (40ppm -HyPAS -with FAX) : 40HF Olivetti model

d-Copia 5004MF

(50ppm -HyPAS -with FAX) : 50HF Olivetti model

d-Copia 6004MF

(60ppm -HyPAS -with FAX) : 60HF Olivetti model

Revision history

Revision Date Pages Revised contents

1 14 February 2014 1-1-2 Correction: Power source →Rated input

1-1-3, 1-1-4 Correction: sheets/min →ppm, images/min →ipm

1-1-5 Correction: 18.Left cover →controller cover

1-1-12 Correction: (2)d-Copia ... →50/60ppmmodel ...

1-2-1 Correction: 120V60Hz 10.0A →12.0A

1-2-3 Correction: The parts of No.15 and No.16

1-2-4 Added: Cautions sentence for carrying the machine

1-2-8 Correction: Left cover →controller cover

1-2-11 Changed: Procedures and Figure for the loading paper

1-2-15 Added: Setting the country code

1-3-16 Added: into the description of (60) Media type attributes

1-3-16, 17 Added: Contents addition in (62),(75), (78) to (81),

(84) to (87)

1-3-32 Changed: Figure 1-3-9 in U070

1-3-38 Changed: Procedure in U201

1-3-40 Changed: Procedure in U207

1-3-44 Added: Error codes

1-3-54, 1-3-55

1-3-58 to 60

Changed: Item number of original

1-3-55 to 57 Correction: List of the Error Codes

1-3-62 Added: a display of TDRS connection state

1-3-63, 1-3-65 Correction: The position of "Excute"

Correction: Kind of error

1-3-98 Correction: Procedure in U917

1-3-106,

1-3-109,

1-3-110

Added: Completion

1-3-107 Added: 254 Taiwan to Destination code list

1-4-83 Correction: right cover →rear cover

1-4-108 Added: Error code 3102

1-5-11 Added: Procedure 8 “Remove...”

1-5-16 Deleted: Procedure 5 “Refit...”

1-5-20, 1-5-52 Added: Procedure 4 “Open the ...”

1-5-20, 1-5-21,

1-5-52, 1-5-53,

1-5-59, 1-5-64,

1-5-65, 1-5-67,

1-5-86, 1-5-87,

1-5-94, 1-5-95

Correction: Names of cover

(upper right cover →right upper cover)

(right upper cover →right middle cover)

(upper left cover →left upper cover)

(left upper cover →left middle cover)

(right upper cover →front right cover)

1-5-71 Correction: Duplex assembly →Duplex conveying unit

1-5-82 Deleted: Procedure 3

1 14 February 2014 1-5-40 Correction: Main/engine →control

1-5-71 Added: (37) “Check ...”

1-5-81 Deleted: (8) “Check...”

1-5-90 to 93 Deleted: The procedure linked to the procedure of other

pages

1-5-99 Correction: Names of fan motor

Deleted: Center and rear fan motor (Japan only)

2-1-1 Changed: Item number (6 to 3 , 3 to 7)

2-1-3, 2-1-4

2-1-6, 2-1-7

2-1-9, 2-1-10

2-1-12

Correction: Parts number

2-2-1, 2-2-2 Correction: Change of the contents of explanation

2-2-12, 2-2-20,

2-2-21, 2-2-31,

2-2-32, 2-2-36,

2-2-37, 2-2-39,

2-2-41, 2-2-48,

2-2-49

Correction: Names of cover

(upper right cover →right upper cover)

(right upper cover →right middle cover)

(upper left cover →left upper cover)

(left upper cover →left middle cover)

2-2-16 Deleteed: U326/U341/U343/U407/U429/U432/U470

2-3-1, 2-3-2 Correction: parts number in maintenance parts

2-3-3 Added: cautions sentence

2-3-15 Correction: main/engine board →controlboard

2-3-22 Deleted: Center and rear fan motor (Japan only)

2 31 April 2014 1-3-10, 1-3-11 Correction: Name of MK

3 23 May 2014 Contents Correction: number of pages

1-3-6,

1-3-102,

1-3-103

Added: U977

1-3-48 Added: Initial setting: Off

This function is available only Asia area.

1-3-54 Correction: Description of table

2-2-1, 2-2-2 Correction: Correction of an explanatory note

4 20 June 2014 Contents,

1-2-20

Correction: (HyPAS model only)

2-2-2 Correction: Procedure 10 (8 →7)

5 22 July 2014 Contents Correction: number of pages

1-4-42, 1-4-43 Added: F code

1-4-74, 1-4-97 Added: (24) Carrier leaking occurs.

2-3-12 to 15 Added: F code

Revision Date Pages Revised contents

Safety precautions

This booklet provides safety warnings and precautions for our service personnel to ensure the safety of

their customers, their machines as well as themselves during maintenance activities. Service personnel

are advised to read this booklet carefully to familiarize themselves with the warnings and precautions

described here before engaging in maintenance activities.

Safety warnings and precautions

Various symbols are used to protect our service personnel and customers from physical danger and

to prevent damage to their property. These symbols are described below:

DANGER: High risk of serious bodily injury or death may result from insufficient attention to or incorrect

compliance with warning messages using this symbol.

WARNING: Serious bodily injury or death may result from insufficient attention to or incorrect compliance

with warning messages using this symbol.

CAUTION: Bodily injury or damage to property may result from insufficient attention to or incorrect com-

pliance with warning messages using this symbol.

Symbols

The triangle ( ) symbol indicates a warning including danger and caution. The specific point of attention is

shown inside the symbol.

General warning. Warning of risk of electric shock.

Warning of high temperature.

indicates a prohibited action. The specific prohibition is shown inside the symbol.

General prohibited action. Disassembly prohibited.

indicates that action is required. The specific action required is shown inside the symbol.

General action required. Remove the power plug from the wall outlet.

Always ground the copier.

1. Installation Precautions

WARNING

• Do not use a power supply with a voltage other than that specified. Avoid multiple connections to

one outlet: they may cause fire or electric shock. When using an extension cable, always check that

it is adequate for the rated current. .....................................................................................................

• Connect the ground wire to a suitable grounding point. Not grounding the copier may cause fire or

electric shock. Connecting the earth wire to an object not approved for the purpose may cause

explosion or electric shock. Never connect the ground cable to any of the following: gas pipes, light-

ning rods, ground cables for telephone lines and water pipes or faucets not approved by the proper

authorities. ..........................................................................................................................................

CAUTION:

• Do not place the copier on an infirm or angled surface: the copier may tip over, causing injury. .........

• Do not install the copier in a humid or dusty place. This may cause fire or electric shock. .................

• Do not install the copier near a radiator, heater, other heat source or near flammable material. This

may cause fire. ...................................................................................................................................

• Allow sufficient space around the copier to allow the ventilation grills to keep the machine as cool

as possible. Insufficient ventilation may cause heat buildup and poor copying performance. ............

• Always handle the machine by the correct locations when moving it. .................................................

• Always use anti-toppling and locking devices on copiers so equipped. Failure to do this may cause

the copier to move unexpectedly or topple, leading to injury. ..............................................................

• Avoid inhaling toner or developer excessively. Protect the eyes. If toner or developer is accidentally

ingested, drink a lot of water to dilute it in the stomach and obtain medical attention immediately.

If it gets into the eyes, rinse immediately with copious amounts of water and obtain medical atten-

tion. .....................................................................................................................................................

• Advice customers that they must always follow the safety warnings and precautions in the copier’s

instruction handbook. .........................................................................................................................

2. Precautions for Maintenance

WARNING

• Always remove the power plug from the wall outlet before starting machine disassembly. ................

• Always follow the procedures for maintenance described in the service manual and other related

brochures. ..........................................................................................................................................

• Under no circumstances attempt to bypass or disable safety features including safety mechanisms

and protective circuits. ........................................................................................................................

• Always use parts having the correct specifications. ............................................................................

• Always use the thermostat or thermal fuse specified in the service manual or other related brochure

when replacing them. Using a piece of wire, for example, could lead to fire or other serious acci-

dent. ...................................................................................................................................................

• When the service manual or other serious brochure specifies a distance or gap for installation of a

part, always use the correct scale and measure carefully. ..................................................................

• Always check that the copier is correctly connected to an outlet with a ground connection. ...............

• Check that the power cable covering is free of damage. Check that the power plug is dust-free. If it

is dirty, clean it to remove the risk of fire or electric shock. .................................................................

• Never attempt to disassemble the optical unit in machines using lasers. Leaking laser light may

damage eyesight. ...............................................................................................................................

• Handle the charger sections with care. They are charged to high potentials and may cause electric

shock if handled improperly. ...............................................................................................................

CAUTION

• Wear safe clothing. If wearing loose clothing or accessories such as ties, make sure they are safely

secured so they will not be caught in rotating sections. ......................................................................

• Use utmost caution when working on a powered machine. Keep away from chains and belts. ..........

• Handle the fixing section with care to avoid burns as it can be extremely hot. ..................................

• Check that the fixing unit thermistor, heat and press rollers are clean. Dirt on them can cause

abnormally high temperatures. ...........................................................................................................

• Do not remove the ozone filter, if any, from the copier except for routine replacement. ......................

• Do not pull on the AC power cord or connector wires on high-voltage components when removing

them; always hold the plug itself. ........................................................................................................

• Do not route the power cable where it may be stood on or trapped. If necessary, protect it with a

cable cover or other appropriate item. ................................................................................................

• Treat the ends of the wire carefully when installing a new charger wire to avoid electric leaks. ..........

• Remove toner completely from electronic components. .....................................................................

• Run wire harnesses carefully so that wires will not be trapped or damaged. ......................................

• After maintenance, always check that all the parts, screws, connectors and wires that were

removed, have been refitted correctly. Special attention should be paid to any forgotten connector,

trapped wire and missing screws. .......................................................................................................

• Check that all the caution labels that should be present on the machine according to the instruction

handbook are clean and not peeling. Replace with new ones if necessary. .......................................

• Handle greases and solvents with care by following the instructions below: ......................................

· Use only a small amount of solvent at a time, being careful not to spill. Wipe spills off completely.

· Ventilate the room well while using grease or solvents.

· Allow applied solvents to evaporate completely before refitting the covers or turning the power

switch on.

· Always wash hands afterwards.

• Never dispose of toner or toner bottles in fire. Toner may cause sparks when exposed directly to

fire in a furnace, etc. ...........................................................................................................................

• Should smoke be seen coming from the copier, remove the power plug from the wall outlet immedi-

ately. ...................................................................................................................................................

3. Miscellaneous

WARNING

• Never attempt to heat the drum or expose it to any organic solvents such as alcohol, other than the

specified refiner; it may generate toxic gas. ........................................................................................

• Keep the machine away from flammable liquids, gases, and aerosols. A fire or an electric shock

might occur. ........................................................................................................................................

Ce manuel convient aux modèles suivants

Autres manuels Olivetti Photocopieuse

Olivetti

Olivetti d-Color MF2613 Plus Manuel utilisateur

Olivetti

Olivetti d-Copia 1800 Manuel utilisateur

Olivetti

Olivetti AR-DU3 Manuel utilisateur

Olivetti

Olivetti d-COLOR MF452plus Manuel utilisateur

Olivetti

Olivetti d-Color MF280 Manuel utilisateur

Olivetti

Olivetti d-Copia 6500MF Plus Manuel utilisateur

Olivetti

Olivetti DP-700 Manuel utilisateur

Olivetti

Olivetti d-ColorMF659 Manuel utilisateur

Olivetti

Olivetti JS-670 Manuel utilisateur

Olivetti

Olivetti d-Copia 120 Guide de configuration

Olivetti

Olivetti d-COPIA 3500MF Manuel utilisateur

Olivetti

Olivetti d-COPIA201D Manuel utilisateur

Olivetti

Olivetti d-Copia 284MF Manuel utilisateur

Olivetti

Olivetti PF-680 Manuel utilisateur

Olivetti

Olivetti d-Copia 23 Manuel utilisateur

Olivetti

Olivetti d-Color MF 4003 Manuel utilisateur

Olivetti

Olivetti DF-650 Manuel utilisateur

Olivetti

Olivetti d-Copia 3003MF Manuel utilisateur

Olivetti

Olivetti Copia 9916 Manuel utilisateur

Olivetti

Olivetti D-COPIA 8200 Manuel utilisateur

Olivetti

Olivetti d-color mf752plus Manuel utilisateur

Olivetti

Olivetti d-Copia 2000 Manuel utilisateur

Olivetti

Olivetti DP-670 Manuel utilisateur

Olivetti

Olivetti d-Copia 1800MF Manuel utilisateur

Manuels Photocopieuse populaires d'autres marques

Canon

Canon iR1210 Manuel de référence

Ricoh

Ricoh FW740 Manuel utilisateur

Minolta

Minolta CF910 Manuel utilisateur

Ricoh

Ricoh B003 Manuel utilisateur

Xerox

Xerox EC70 Manuel utilisateur

Oce

Oce 9800 Manuel utilisateur

Minolta

Minolta Di181 Manuel utilisateur

Canon

Canon iR5000i Manuel utilisateur

Telecrane

Telecrane F25 Manuel utilisateur

Xerox

Xerox WorkCentre Pro 40 Manuel utilisateur

Canon

Canon NP6317 Comment utiliser

Sharp

Sharp AR-5015 N Manuel utilisateur

Ricoh

Ricoh Di-C1 Manuel utilisateur

Mita

Mita MIP-2400 Manuel

Sharp

Sharp AL-2061 Manuel utilisateur

Muratec

Muratec MFX-C2280 Manuel utilisateur

Ricoh

Ricoh FT5034C Manuel utilisateur

Minolta

Minolta EP4000 Manuel utilisateur

Olivetti d-Copia 4003MF Manuel utilisateur

Manuels Photocopieuse populaires d'autres marques