Olitech EasyTel 4G Manuel utilisateur
1
User Manual V1
Model number: OLT2917V2
2
Please note, the information detailed in
this User Manual (V1) reflects information
regarding the EasyTel 4G (OLT2917V2)
operating system software and hardware
released in January 2022.
This product complies with the electrical safety and/or
electromagnetic compatibility (EMC) legislative
requirements for Australia and New Zealand.
3
Table of Contents
Contents
Pg
Contents
Pg
Hardware guide
4
Hardware Setup
24
Key Instructions
4
Powering On/Off
25
Interface Icons
9
Time and date
25
Menu Map &
Functions
9
Calls
26
Speed dial
28
Contacts
10
Messages
29
Message
13
Text Input
31
Call logs
15
Emergency Key
33
Call settings
16
Bluetooth
36
Phone settings
17
Hotspot
38
Restore Factory
Settings
18
Alarm
39
Security Settings
40
Settings (Other)
18
Limited Warranty
41
Audio Settings
(Ringtones & Vol.)
19
Warning and
Maintenance
41
FM Radio
20
Limitation of
Liability
43
Hotspot
21
Organiser
22
Troubleshooting
44
Emergency Key
23
Contact
45
4
EasyTel 4G Hardware Guide
Key Instruction
Key
Description
1. Navigation
key
Use this key to navigate through
menu options and move cursor to
the right/left when entering text/
numbers. The OK key is used to
select highlighted text on screen.
5
Key
Description
2. Selection key
Use this key to select the function
written on the bottom left the
screen. Eg: Menu (when on home
screen).
3. Emergency
key
Press and hold key for 5 seconds to
activate Emergency Key. See page 22
and 33 for more information.
4. Back key
Use this key to go back in the menu
or perform the function written on
the bottom right of the screen.
5. Green call
key
Use this key to accept an incoming
call or to call a contact.
6. Red end call/
power key
Use this key (single press) to decline
an incoming call. Press and hold this
key for 5 seconds to power on/power
off the phone.
6
Key
Description
7. Number keys
Star (*) key
Hash (#) key
Use these keys to enter
numbers and characters.
Additional information:
When on the main/home screen, if number 1 is pressed
and held for 3 seconds, a call to voicemail initiates. If
speed dial is programmed, and the associated number
key (2-9) is pressed and held for 3 seconds, a call to the
programmed phone number initiates. See page 28 for
greater detail.
If *(star) is pressed when entering text, symbols appear
on screen. When dialling a phone number, if *is pressed
twice in quick succession (**) a + sign appears (used for
international calls).
If #is pressed when writing a message/programming a
phone number, input options open (eg: Abc, abc, ABC).
See page 31 for more information.
If #is pressed and held for 3 seconds it will
activate/deactivate silent mode.
7
Key
Description
8. Message key
Direct access key to Messages.
When pressed, Messages open.
9. Mute key
Press key to mute your voice during
a call.
10. Volume
down key
Press volume down key to:
Decrease ringtone volume when not
on an active call; OR
Decrease handset/ speaker volume
during an active call.
11. Volume up
key
Press volume up key to:
Increase ringtone volume when not
on an active call; OR
Increase handset/ speaker volume
during an active call.
12. Dedicated
speed dial
Press the dedicated speed dial key to
call the phone number programmed
to the key. See page 28 for more
information. The clear cover on the
key can be removed and replaced by
a personalised card (colour, name,
8
Key
Description
picture). If the dedicated speed dial
key is pressed and the receiver is not
lifted, audio will divert to the
loudspeaker.
13. Redial key
Press this key to dial the last dialled
phone number.
14. Handsfree/
Loudspeaker
key
This key activates/deactivates the
loudspeaker. Press key:
•during an active call to transfer
audio from handset to loud
speaker (when audio has
transferred to loudspeaker the
handset can be returned to the
cradle). To return the audio to
the handset pick up the handset
from the cradle.
•to initiate a call via loudspeaker.
To do so, dial number and press
the loudspeaker key.
Note: If you are in loud speaker
mode and you press the loud
speaker key it will end the call.
9
Interface Icons
Icon
Description
Icon
Description
Network &
signal strength
Unread message
Missed call
Power source/
battery charge
FM Radio
Bluetooth
Mobile
Hotspot
Alarm on
Silent mode active. Press and hold “#” key for 3
seconds to activate or de- activate the ring tone
and key tone.
Menu Map and Functions
The EasyTel 4G Menu has nine sections outlined below. To
access the Menu, press the top left key when on the
home/main screen.
1. Contacts
2. Message
3. Call logs
4. Settings
10
5. Audio settings
6. FM radio
7. Hotspot
8. Organiser
9. Emergency key
Contacts
There are two ways the Contacts list can be opened:
1. Press the top right key to select Contacts; OR
2. Press the top right key to select Menu, then select
Contacts.
When the Contacts list is open, a search bar is at the top of
the screen and contacts are listed alphabetically (by the
first character in the contacts name). Contacts saved to the
SIM will automatically appear in the Contacts list.
Contacts Options are accessed by pressing the top left key.
These options are outlined below:
Function
Selection
Call
Only visible when a contact
is highlighted and Options is
selected.
Initiates call to Contact.
Menu →
Contacts →
Options →
Call
Details
Only visible when a contact
is highlighted and Options is
selected.
Opens contact information.
Menu→
Contacts →
Options →
Details
Ce manuel convient aux modèles suivants
1
Table des matières
