Oki LUCIDIOM EQ-9800 Manuel utilisateur

LUCIDIOM

EQ-9800

Installation

Guide

1Before you go onsite............................................................................2

Preinstall Checklist.................................................................................2

2Setup Printer .......................................................................................2

To print a configuration page: .................................................................2

3Assign an IP address to the Printer .....................................................3

4Configure Printer .................................................................................3

Disable Auto Tray Switch........................................................................4

Media Type Setting................................................................................4

Disable Media Check ..............................................................................4

5Add a printer........................................................................................4

6Two Way Communication.....................................................................5

To Configure Options Automatically..........................................................5

7Printing Preferences Defaults ..............................................................6

8Install Command Workstation .............................................................6

9Color Setup ..........................................................................................6

10 Install Eye-One Device ........................................................................7

11 Calibrate Printer ..................................................................................7

12 Checklist..............................................................................................9

Configuration Page ................................................................................9

Driver Setup....................................................................................... 10

Rev. 3.6

1BEFORE YOU GO ONSITE

MPT = All other media

Tray 1 = 10” x 7” 80# cover

Tray 2* = 8.5” x 11” 100# text

Tray 3 = 8.5” x 11” 80# cover

Tray 4 = 12” x 12” 100# text

Tray 5 = 12” x 18” 80# cover

*Tray 2 is an optional paper tray

EQ-9800 Printer

2nd Paper Tray (optional)

High Capacity Feeder

Not Shown: Sample Media Pack

PREINSTALL CHECKLIST

These instructions assume that certain

requirements have been fulfilled prior

to installation. It is recommended that

you call the customer and confirm that

the following are in place before

arriving onsite:

□Network connection and cable are

available/tested and ready for the

installation to the printer

□Assigned IP address or DHCP?

□Location for the printer has been

cleared and ready to receive printer

□PC is available and setup to install

drivers and software. Order of

preference:

•WinXP with Photo Finale Lab

(PFLAB)

•WinXP with Print Station

•Any WinXP computer

*Only schedule setup, when customer has WinXP.

□PC should be able to contact printer’s

IP address

□Open ports between PC and printer

•SNMP (port 161)

•HTTP (port 80)

•LPR (port 515)

□ES-1000 (Eye-One) Spectrometer to

calibrate printer

□Equipment (EQ-9800, paper trays and

sample media)

2SETUP PRINTER

Setup the printer, install the media and

calibrate the printer. When finished,

print a configuration page to ensure

that the printer is working.

Contents:

Install the media in the following trays

locations:

TO PRINT A CONFIGURATION PAGE:

1. Press ENTER to switch to the menu

mode.

2. Use the Tkey to scroll down to

Print Pages. Press ENTER.

3. Use the Tkey to scroll down to

Configuration. Press ENTER.

4. Display will read [Printing Config]

3ASSIGN AN IP ADDRESS TO

THE PRINTER

If you are not using DHCP, you need to

obtain an IP Address from your

network Administrator and enter it

using the front panel:

1. Confirm that the printer displays

[Ready to print].

2. Press Tkey until [Admin Setup]

appears. Press ENTER.

3. Continue to Setup? displays.

Press ENTER to select Yes. The

printer goes offline and Running

Setup displays. This will take about

a minute.

4. The Setup Menu displays, press T

to select [Network Setup]. Press

ENTER.

5. Press Tto select [Protocol

Setup]. Press ENTER.

6. Press Tto select [TCP/IP Setup].

Press ENTER.

7. Press Tto select [Ethernet

Setup]. Press ENTER.

8. [TCP/IP Ethernet] displays.

Select Yes and press ENTER.

Enable AutoIP Config? displays.

Select No. Press ENTER.

9. The default IP Address displays.

Use ▲/Tto change each octet.

Press ENTER to proceed to the next

octet or to leave the octet

unchanged.

10. [Subnet Mask] displays. Repeat

instructions in step 9.

11. [TCP/IP bound to Ethernet]

displays. Press ENTER.

12. [Gateway Address] displays.

Repeat instructions in step 9.

13. Press ENTER to exit TCP/IP Setup,

Protocol Setup, and Network

Setup.

14. Select Yes and press ENTER to Save

Changes. Press ENTER to Exit the

Setup Menu.

15. Printer restarts the server and

initializes. [Ready to Print]

displays.

4CONFIGURE PRINTER

Press ENTER to switch to the menu

ode.

3. Use the T/Sand ENTER keys to drill

down to the item you wish to

change.

1. Use the Tkey to scroll down to the

function you wish to change.

2. Press ENTER.

4. Use the S/Tkeys to move to the

setting you wish to engage.

5. Press ENTER.

An asterisk appears next to the new setting.

6. Press ON LINE to exit the Menu

AUTO

T C RATION →TRAY1

GLOSSY

Glossy.

roll down to

etup]. Press ENTER.

ia Check].

7. [Save

Printer will come back to ON

mode.

DISABLE AUTO TRAY SWITCH

MENUS →TRAY CONFIGURATION →

TRAY SWITCH →OFF

MEDIA TYPE SETTING

MENUS →RAY ONFIGU

CONFIG →MEDIA TYPE →

Repeat, changing the tray selection

until all trays have been set to

DISABLE MEDIA CHECK

Press ENTER.

1. Use the Tkey to sc

[Admin S

2. T/Skeys →Yes. Press ENTER.

Offline appears on the display.

3. Wait for setup to run. The Setup

menu appears

4. T/Skeys →[Printer Setup].

Press ENTER.

5. Continue to press ENTER until you

come to [Med

6. T/Skey →Off. Press ENTER.

Continue to press Enter >

Changes?] T/S→Yes. Pres

ENTER.

T/Skey →[Exit Setup]. Press

ENTER.

LINE.

5ADD A PRINTER

1. Open Printers by clicking the

Start button, clicking Control

Panel, clicking Printers and

Faxes.

2. Click Add a printer.

3. When the Welcome to the Add

Printer Wizard appears, click

Next.

4. Select Local printer attached to

this computer. Deselect

Automatically detect and install

my Plug and Play printer, then

Select Creat

click Next.

5. e a new port and

6. Add

7. n the

choose Standard TCP/IP Port

from the drop down menu.

When the Welcome to the

Standard TCP/IP Printer Port

Wizard appears, click Next.

Type the printer’s IP address i

field labeled Printer Name or IP

Address. Click Next.

8. On the Additional Port

Information Required menu,

choose Custom, then click the

Settings… button.

9. On the Port Settings page,

change the Protocol to LPR.

Enter Print as the Queue Name.

Check SNMP Status Enable, then

On the Install the printer driver

click Ok. Click Next, then Finish.

10.

11. ate to the

12. S

xt.

15.

type EQ-9800 and click Next.

ter

17.

k Next, then

6AY COMMUNICATION

page, click Have disk…

Click browse, then navig

driver location on Drivers, Color

and Network Utilities CD.

<cdrom>\drivers\win2k_xp\p

elect OP723PS.inf. Click Ok.

13. Choose Oki C9800, then Next.

14. Select Keep existing driver

(recommended), then click Ne

On the Name Your Printer page,

16. On the Printer Sharing page,

choose Do not share this prin

and click Next.

Print a test page to confirm your

installation. Clic

Finish.

TWO W

After you have completed the printer

driver installation, you must configure

AUTOMATICALLY

bled network,

cally update your

tab.

the printer for the installed options.

You can configure the options manually

or, for TCP/IP network connections,

you can use the Two-Way

Communication feature to configure

the options automatically.

TO CONFIGURE OPTIONS

If you have a TCP/IP-ena

you can automati

printer driver to reflect the options

currently installed on the printer.

1. Click START → SETTINGS → PRINTER

2. Right-click the EQ-9800 icon.

3. Click Properties.

4. Click the Installable Options

5. Select Two-Way

Communications.

ddress or DNS

ettings when opened, en

If date, check that the IP address is

ay be blocking

7DEFAULTS

6. Type the Fiery IP a

name.

7. To display the printers current

default s

select Update Fiery Driver Wh

Opened.

Click Update. Click OK.

this does not up

correct. If correct, then the customer m

port 161 with network security.

PRINTING PREFERENCES

Righ rinter, and select

Printing Preferences.

Media Type

ff.

eat the top to

4. ert

pert

6. wn menu for

rofile and change to

ing Style and change to

8. nd change to

Photo_r2. Click Ok.

9. Click on Colorwise to close.

nge

dge Binding.

bottom and

t-click on the p

1. On the Fiery tab, click on Paper

Source. Change the

to Glossy.

Scroll down and change Auto Tray

Switch to O

3. Change Media Check to Off. Click

on Paper Sourc

close those items.

Click on Colorwise. Select Exp

Color, then click Ex

Settings… button.

Click Update.

Click on the drop do

RGB Source P

Vivid.

Click on the drop down menu for

Render

Photographic.

Click on the drop down menu for

Output Profile a

0. Click on Image Quality, then

choose Best. Close Image

Quality.

1. Click on Finishing.

12. Click on the drop down box for

Two-sided Printing and cha

to Long E

13. Click on Apply at the

Close.

INSTALL COMMAND

WORKSTATION

Insert the Fiery Administrator

(p/ 35020001) into your CD-

Utilities

n ROM

drive

1. Select your language.

ct your printer model. Click

orkStation.

2. Click Next to accept the License

Agreement.

3. Sele

Next.

4. Select Quick Install to install only

Command W

9COLOR SETUP

1. Click START →ALL PROGRAMS →FIERY

→COMMAND WORKSTATION4

Cfrom the

Server menu. CWS4 will start

e correct

2. hoose Log in/Log out

searching for Fiery servers. Choose

the device that matches th

IP Address.

Server menu.

Click the Login button next to the

Fiery name to establish th

connection.

Select the

Administrator

option and the

click Log In.

Choose Manage

Color from the

6. Choose Color Setup.

7. Click on the drop down menu for

RGB Source Profile and change to

Vivid.

8. Click on the drop down menu for

Rendering Style and change to

Photographic.

9. Uncheck “Use Media Defined

Profile”.

10. Click on the drop down menu for

Output Profile and change to

Photo_r2. Click Apply, then Ok.

10 INSTALL EYE-ONE DEVICE

Plug the Eye-One (ES-1000) device

into an available USB slot.

1. A found new hardware wizard will

appear.

2. Select No, not this time when it

asks you to connect to Windows

Update, then click Next.

3. Select Install the software

automatically (Recommended),

then click, Next.

4. Click Finish, when Windows has

completed installing the hardware.

11 CALIBRATE PRINTER

1. Click START →ALL PROGRAMS →FIERY

→COMMAND WORKSTATION4

2. Choose Log in/Log out from the

Server menu. CWS4 will start

searching for Fiery servers. Choose

the device that matches the correct

IP Address.

3. Click the Login button next to the

Fiery name to establish the

connection.

4. Select the Administrator option

and then click Log In.

5. Choose Manage Color from the

Server Menu.

6. Click on Calibrator.

7. For Select Method, choose ES-

1000 Spectrometer from the drop

down menu.

8. For the Screen Setting, choose

12x6 Dot Screen from the drop

down menu.

9. Click Print.

10. On the Print Options Menu, keep

the defaults and click Print. A

16. Measure the cyan swatches by

starting the ES-1000 in the grey

bracket atop the swatches.

page with 21 swatches will print to

the printer.

17. Click the button on the device and

wait for an audible beep. If you

cannot hear the beep then wait 1-2

seconds, before dragging the

device down the page.

18. While holding the button drag the

device smoothly down the plastic

guide until you have passed the

last swatch, then release the

button. To judge the correct

speed, from start to finish, use a

count of 4.

11. Place the printed page on a stack of

5 sheets of blank paper to prevent

bleed through.

19. When the scan has been

successful, a check will appear and

the red cross will move to the next

color.

12. Align the plastic guide strip up so

that the center passes through the

Click Measure.

20. When all four colors have been

scanned, click the Accept button.

first column of swatches (Cyan).

13.

are doing 21

15. ts

21. Click Ok.

22. Click Apply.

14. Confirm that you

patches and click Measure.

A window opens that request

“Please place the ES-1000 in i

calibration cradle and click Ok.”

Click Ok.

12 CHECKLIST

After completing all the installation steps, print a configuration page. Confirm that

all the items have been completed on the checklist, then fax the checklist with the

configuration page to: 856-222-5098.

Date:

Company Name:

Contact:

Address:

City, State, Zip:

Printer Serial No:

CONFIGURATION PAGE

Update Information

□Check for Photo_2.2

Network Setup

□Check the IP address and record. (Step 3)

Printer Setup

□Last Calibration should be today on 12x6 Dot Screen (Step 11)

□Check that Media Check: Disabled (Step 4)

Color Setup

□RGB Source Profile: Vivid RGB (Step 9)

□Rendering Style: Photographic (Step 9)

□Output Profile: Photo_r2 (Step 9)

Tray Configuration

□Auto Tray Switch: Off (Step 4)

□Media Type (Trays 1-4 & MP Tray): Glossy (Step 4)

Autres manuels pour LUCIDIOM EQ-9800

Table des matières

Autres manuels Oki Imprimante tout-en-un

Oki

Oki MC780fx Mode d’emploi

Oki

Oki B2500 MFP Manuel utilisateur

Oki

Oki MB280 MFP Guide de démarrage rapide

Oki

Oki MC363DN Manuel utilisateur

Oki

Oki C5550 MFP Manuel utilisateur

Oki

Oki ES9476 MFP Manuel utilisateur

Oki

Oki CX2731MFP Manuel utilisateur

Oki

Oki ES 1624n MFP Manuel de service

Oki

Oki CX4545 MFP Manuel utilisateur

Oki

Oki MB780 Manuel utilisateur

Oki

Oki ES3640 MFP Manuel utilisateur

Oki

Oki ES 1624n MFP Instructions d'utilisation et de sécurité

Oki

Oki OKIFAX 1050 Manuel utilisateur

Oki

Oki C5550 MFP Manuel utilisateur

Oki

Oki CX 1145 MFP Manuel de la liste des pièces

Oki

Oki CX 1145 MFP Manuel d'instructions et de sécurité

Oki

Oki CX2033 Comment utiliser

Oki

Oki MC780fx Manuel utilisateur

Oki

Oki CX 1145 MFP Mode d’emploi

Oki

Oki MC560 MFP CX2032 Manuel utilisateur

Oki

Oki C3530 Manuel utilisateur

Oki

Oki CX3641 MFP Manuel utilisateur

Oki

Oki MB260 MFP Manuel de formation

Oki

Oki C3530 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur