Okay Electronic Technology CWB604 Manuel utilisateur
-1-
Digital Wireless Camera
Model: CWB604
-2-
1. PRODUCTS OVERVIEW............................................................................................................................................3
1.1 NVR
..................................................................................................................................................
3
1.2 Bracket ( Optional )......................................................................................................................3
1.3 Camera............................................................................................................................................3
2. HARD DISK INSTALLATION....................................................................................................................................4
3. SPECIFICATIONS.......................................................................................................................................................4
4. QUICK SETUP.............................................................................................................................................................6
4.1 Connect the NVR .......................................................................................................................... 6
4.2 Connect the Camera.....................................................................................................................6
4.3 Live View Video Monitoring........................................................................................................7
4.3.1On‐ScreenDisplay...................................................................................................................7
5. MENU OPERATION....................................................................................................................................................9
5.1 Main Menu.......................................................................................................................................9
5.2 Camera Setting.............................................................................................................................10
5.2.1Pairing....................................................................................................................................10
5.2.2Activation..............................................................................................................................12
5.2.3Brightness..............................................................................................................................13
5.2.4Volume..................................................................................................................................13
5.2.5MDSensitivity(MotionDetectSensitivity)............................................................................13
5.3 Record Setting..............................................................................................................................14
5.3.1RecordTime...........................................................................................................................14
5.3.2DateStamp.............................................................................................................................15
5.3.3LoopRecording......................................................................................................................15
5.3.4HDDFormat............................................................................................................................15
5.4 Record Trigger Setting...............................................................................................................16
5.5 System Setting.............................................................................................................................17
5.5.2TVOutput(AnalogVideo/MonoAudioOut).........................................................................18
5.5.3PowerSaving(TurnOFFvideoOutput).................................................................................18
5.5.5LanguageSetting....................................................................................................................19
5.5.6Setpassword..........................................................................................................................19
5.6 Event List.......................................................................................................................................20
5.6.1Browsevideofiles..................................................................................................................21
5.6.3ExportvideofiletoTFCard....................................................................................................23
5.6.4FormatTFcard.......................................................................................................................23
5.7 HDD Capacity................................................................................................................................23
5.8 Network Function........................................................................................................................25
5.8.1NetworkStatus.......................................................................................................................25
5.8.2FirmwareUpdate...................................................................................................................25
6. MOBILE APPs “Kalay Cam” by TUTK.................................................................................................................26
6.1 Quick NVR Setup using Kalay Cam........................................................................................27
6.2 More functions in CAMERA mode..........................................................................................28
6.3 LIVE mode setting.......................................................................................................................30
-3-
1. PRODUCTS OVERVIEW
1.1 NVR
Note:
There is only one button on the top of the monitor, which can be used as POWER
key and SCREEN key. Press 1 second, the screen will turn on/off. Keep pressing 3
seconds, the power will turn on/off.
1.2 Bracket ( Optional )
1.3 Camera
-4-
2. HARD DISK INSTALLATION
* Unscrew the screw
Install the 2.5 inch HDD,obliquely inserted it into the NVR and tighten the
Screws.
Note:
If you do not install the 2.5 inch HDD, Recording will be unworkable
3. SPECIFICATIONS
2.4G Wireless NVR (KW16N4-L09)
Items Parameters Values
LCD Panel Screen type 9〞TFT-LCD
Display Area 196.61×114.15mm
Resolution 1024(H)×RGB×600(V)
System Main processor ARM9EJ-S
Operating system RTOS
Video
Video compression H.264
Video input mode(IP) 4*720P
Video Outputs HDMI, Analog Video
Display Resolution Max. 720p HD
Audio Audio compression Audio32
Intercom Option
-5-
Recording
Recording
Modes Manual, Scheduled,
Motion Trigger
Recording Resolution 720p HD (4 Channels)
Recording Frame Rate Max 25fps / 30fps @ 720p
for each channel
Loop Recording Yes
Hard Drive Built-in HDD slot (Max.
Supported 2TB)
Connections
Network Apps Kalay Cam (iOS & Android)
Account Type Google, Facebook,
Wechat, QQ
Network Access Mode Local, P2P
Event Push to
Smartphone Yes
NVR Mobile Sharing Yes
External Interface
Network Interface RJ45 LAN Port x 1
HDMI Output HDMI Port x 1 (1.3)
AV Output None
SD Card video files
export 32GB (AVI Format)
USB Port Yes (2.0)
External Controller
Panel Key N/A
IR Remote N/A
Touch Key N/A
Touch Screen Yes
General
Power Supply DC12V/2A
Working Environment 0~+55℃/ 10~90%RH /
86~106kpa
Dimension 24.5*16.5*3.0mm
Weight 0.68kg
Camera (CWB604)
Items Parameters Values
Sensor and lens Image Sensor 1/4” OV9712 1Megapixel
progressive scan
CMOS
Focal Length 3.6mm
Video Video Quality 720p
Viewing Angle 70 (Diagonal)
Night Vision IR LED 32 pcs, 850nm
Night Vision Distance 20-30 meters
IR Cut Filter Yes
General
Power Supply DC 5V/2A
Working Environment -10~+60℃/Less than
95% RH
waterproof IP66
Dimension Ø67mm×168mm
Weight 0.39kg
-6-
4. QUICK SETUP
4.1 Connect the NVR
Note:
a) Before using the equipment, please confirm the Router is open DHCP service (Generally, the
Router is open DHCP service automatically) .
b) Camera must be installed within the valid transmission distance to ensure the LCD NVR can
receive the stable and clear image from the cameras.
4.2 Connect the Camera
a) Install the antenna to cameras
b) Connect all cameras to AC/DC adapter, plug the AD/DC adapter into wall AC outlet.
Signal LED in front of the camera indicates signal condition.
1) BLUE steady ON – Signal is high
2) BLUE flashing - Signal is medium
3) RED steady ON - Signal is low
Note:
All LEDs will be turned OFF after 1 minute.
a) Installtheantennato
LCDNVR
b) ConnectLCDNVRwith
RouterbyRJ45cable
c) Pluginthepower
adapterofLCDNVR
-7-
4.3 Live View Video Monitoring
4.3.1On‐ScreenDisplay
(1) Camera channel No#
(2) Recording in progress
(3) Wireless signal
(4) Time / Date Stamp
(5) Main menu
(6) Brightness
(7) Record (# No hard drive，can not
record)
(8) Return
(A) 1-Channel ZOOM In 4-Channel Preview
*In Live View mode / Record mode / Video file playback mode, point & click LEFT mouse button
to zoom in single channel. In zoom-in mode, LEFT-click mouse again to restore 4-channel
view.
*In front panel keypad and IR remote controller, press [CH] button to display single channel & 4T
mode in sequence.
4T mode CH1 CH2 CH3 CH4 4T mode CH1 …..
Note:
Zoom-in function is not available when playback file during recording.
(B)Start/Stop Recording
In live view mode, Press [ENTER] button or use mouse toolbar to start video recording. A
RED dot Appears in top right-hand corner of each camera channel. Press the button again to
stop video recording
-8-
Note:
If the NVR does not receive video signal from ALL 4 cameras due to certain reasons (e.g. power
lost, signal too weak, …etc), the NVR will reboot every 10 minutes trying to restore video
connection from the cameras.
When the NVR is recording video, user can still use the following MENU functions:
Menu Icon Description Functions Accessible
CameraSetting
Activation – Camera
ON/OFF only
Change brightness
Change motion detect
sensitivity
RecordSetting
Change record file
duration
(1 / 2 / 5 minutes)
Set date stamp ON/OFF
Set HDD Loop recording
ON/OFF
EventTriggerSettingEdit trigger events
SystemSetting
Change power saving
time
(No saving, 2 / 5 / 10
minutes)
EventListPlayback video files
Delete video files
-9-
Live View Mode
In Live View mode, move near bottom-center of the screen activates the Live View
Quick Toolbar. 4 functions available:
Return the main menu
[Left Click] the icon return to the main menu.
Brightness
the icon once to select to view current brightness level
bar. Move the mouse cursor up/down the bar to adjust
brightness and [Left Click] again to confirm changes
Start/Stop Recording
[Left Click] once to toggle Recording Mode on or off.
Return
5. MENU OPERATION
5.1 Main Menu
(a) Use [UP / DOWN / LEFT / RIGHT] buttons to select functions, then press [ENTER]
button;
(b) Move mouse cursor to function icon, left-click mouse button to enter menu.
M
Clicktostart Clicktostop
-10-
5.2 Camera Setting
(a) Pairing (d) Volume
(b) Activation (e) MD Sensitivity
(c) Brightness (f) MD Area
5.2.1Pairing
Register camera to NVR to transmit Live Video.
Label under camera icons:
– This camera channel is available for pairing
– This camera channel is registered with a camera
– Pairing in progress
– Pairing failed. Please check camera and try again
Pairing the camera:
1. Press [ENTER] button to start. By default, camera channel 1 is selected
(RED colour).
Table des matières
