Ohio Steel PROFESSIONAL GRADE 50LS Guide de planification

READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS BEFORE USING THIS EQUIPMENT

50LS

26 cu ft L

WN SWEEPER

w/ PERFORATED HOPPER BAG

U.S. Patent No.

7,610,646

??????? - REV A07/17

Read and understand all safety rules and operating instructions before using this

tractor attachment.

Follow all safety rules and operating instructions provided by your tractor's

manufacturer when using attachment.

Never allow children or untrained persons to operate tractor or attachment.

Reduce tractor speed to slowest setting when towing or operating on slopes.

Operate up and down slopes, never across the face of slopes.

Do not carry passengers on tractor or attachment.

Avoid sudden turns or maneuvers.

Use caution when backing up to prevent damaging attachment.

Do not tow attachment on public roadways.

Do not remove warning decals from product.

Check product for worn, loose, or damaged parts before each use. If any damage

is present, repair the product before using.

Check product for loose or missing fasteners before each use. Tighten or replace

fasteners as needed before using.

Do not fasten rope to any part of your body or clothing.

Do not hold rope while tractor and Lawn Sweeper are in motion.

Do not use Lawn Sweeper near fire or smoldering debris.

Always fasten rope to tractor to avoid contact with wheels and brushes.

Always empty hopper before storing to avoid spontaneous combustion of contents.

Do not exceed tractor speed of 6 miles per hour when towing or operating Lawn

Sweeper.

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

Safety Rules

(x1)

(x2)

(x1)

(x2)

(x1)

(x2)

(x8)

(x2)

(x1)

(x10)

(x11)

(x2)

(x3)

(x4)

TOOLS REQUIRED FOR ASSEMBLY:

9/16" Wrench and Socket

•

Carton Contents

29 60

Attach Short Hitch Tubes to Sweeper Assembly and tighten hardware.

DO NOT OVERTIGHTEN.

Attach Handle to Height Adjustment and tighten hardware.

Insert Long Hitch Tubes into Short Hitch Tubes and snap into position.

Assembly Instructions

629

Install hardware through front two holes of Long Hitch Tubes as shown.

Hold Adjustment Lever in position and install third bolt as shown.

Pin Adjustment Lever to Handle.

DO NOT TIGHTEN

AT THIS TIME.

Install Clevis Bars as shown; Clevis bolts pass between Hitch Tube bolts.

Tighten Hitch Tube hardware first, then tighten Clevis hardware.

Insert Bottom Frame Tubes into Rear Frame Tube and snap into position.

Assembly Instructions

Slide Hopper Bar into pocket of Hopper Bag as shown.

Place bottom frame assembly into Hopper Bag.

Install Clevis Pins through Hopper Bag, Hopper Bar, and Bottom Frame Tubes

and secure with Hairpins.

Insert Top Frame Tubes into Rear Frame Tube and snap into position.

Assembly Instructions

46 53

Velcro Tab

Place top frame assembly into Hopper Bag.

Install Clevis Pins through Top Frame Tubes and Bottom Frame Tubes

and secure with Hairpins.

Slide Pivot Rod through Top Frame Tube and Connecting Tube, then through

pocket of Hopper Bag, then through Connecting Tube and Top Frame Tube.

Secure both ends with Washer and Hairpin.

Hold Hopper Bag open and carefully insert Tension Rods into holes in

Rear Frame Tubes.

Secure Hopper Bag around Top Frame Tubes with velcro tabs.

Assembly Instructions

Insert Connecting Tubes into Short Hitch Tubes and secure with

Quick-Release Pins.

Install Hitch Pin and secure with Hairpin.

Tie Dump Rope securely around exposed section of Rear Frame Tube.

Assembly Instructions

How to Sweep Lawn:

Remove large debris from lawn.

Do not sweep if conditions are too wet or muddy.

Attach Lawn Sweeper to tractor using supplied hitch pin. The multi-pronged

hitch allows the Lawn Sweeper to accomodate varying tractor hitch heights;

choose the appropriate setting so that Lawn Sweeper hitch tubes are

roughly level with the ground.

Attach dump rope to tractor so that it cannot contact the brushes or wheels.

Start tractor engine and tow Lawn Sweeper to lawn.

Adjust brush height so that brushes extend roughly 1/2" below the tips of the

grass. For best performance, always set the brushes as high as possible to

minimize resistance on brushes and wheels.

Engage tractor drive at its slowest speed and begin sweeping. Increase

tractor speed as required to throw material to the back of the hopper bag.

Sweep in straight lines whenever possible and avoid sharp turns.

Periodically check the sweeper while operating to ensure that wheels and

brushes are rotating smoothly and that nothing is wrapped around the

brushes or brush shaft.

When filled, the hopper bag can be emptied by pulling the dump rope

10.

forward.

Before Using Lawn Sweeper:

Read all Safety Rules found on page 1.

How to Adjust Brush Height:

Remove hairpin and detach adjustment lever from handle.

Move handle downwards to raise the brush height or upwards to lower the

brush height.

Align the handle pin with the nearest hole in the adjustment lever. Use the

top or bottom pin on the handle, whichever provides the best alignment.

Secure adjustment lever to handle with hairpin.

Operating Instructions

Periodic Maintenance:

Tighten fasteners as needed before each use

•

Empty hopper and thoroughly clean Lawn Sweeper after each use

•

Remove any materials that have wrapped around brushes or brush shaft

•

after each use

Lubricate wheel bearings and gears annually with a light coating of grease

•

Storing Lawn Sweeper:

Empty hopper bag and thoroughly clean Lawn Sweeper before storing.

Store Lawn Sweeper away from excessive heat to prevent damage.

Brushes must not contact ground during storage to prevent damage.

Remove quick-release pins to separate hopper bag from Lawn Sweeper.

Carefully remove tension rods and collapse hopper bag for compact storage.

Detach adjustment lever from handle and depress snap buttons to remove

hitch tubes from Lawn Sweeper for compact storage.

Table des matières

Autres manuels Ohio Steel Balayeuse à gazon

Ohio Steel

Ohio Steel AllFitHD AF-5026LS Manuel utilisateur

Ohio Steel

Ohio Steel 4222V2 Manuel utilisateur

Ohio Steel

Ohio Steel 42SWP22 Manuel utilisateur

Ohio Steel

Ohio Steel 42LS Manuel utilisateur

Ohio Steel

Ohio Steel 46SWP24 Manuel utilisateur

Ohio Steel

Ohio Steel 42TSC Manuel utilisateur

Ohio Steel

Ohio Steel Cub Cadet CC-5026LS Manuel utilisateur

Ohio Steel

Ohio Steel 50SWP26 Manuel utilisateur

Ohio Steel

Ohio Steel 5026V2 Manuel utilisateur

Ohio Steel

Ohio Steel 42SWP-REVD Manuel utilisateur

Manuels Balayeuse à gazon populaires d'autres marques

Starmix

Starmix StarSweep 65 Manuel utilisateur

HAKO

HAKO Hako-Profi-Flipper Manuel utilisateur

RedMax

RedMax RMSZ2500 Manuel du propriétaire

Black & Decker

Black & Decker GWC1800L Manuel utilisateur

Sanitaire

Sanitaire SC6093A Manuel utilisateur

Zenoah

Zenoah RMSZ2601 Manuel utilisateur

Craftsman

Craftsman 486.242231 Manuel utilisateur

YARD Commander

YARD Commander SP31128 Manuel utilisateur

Agri-Fab

Agri-Fab 45-0570 Manuel utilisateur

FLORABEST

FLORABEST FKM 2400 A1 Manuel utilisateur

Craftsman

Craftsman 486.24212 Manuel utilisateur

Kärcher

Kärcher KM 120 Manuel utilisateur

Agri-Fab

Agri-Fab 26" Leaf/Lawnsweeper 45-02181 Manuel utilisateur

Nordic

Nordic WS-L0118 Manuel utilisateur

Smithco

Smithco 72-000-A Manuel utilisateur

Parker

Parker Suburbanite 895803 Manuel utilisateur

Agri-Fab

Agri-Fab 45-0290 Manuel utilisateur

Agri-Fab

Agri-Fab 26" Leaf/Lawnsweeper 45-02181 Manuel utilisateur