OHAUS CS Series Manuel utilisateur

Quick Start Guide CS Series Scales

Ohaus Corporation www.ohaus.com iCS Series Scales Quick Start Guide

PREPARATION FOR USE

Check Power

For AC power, be sure local line voltage

matches voltage printed on the scale’s power

adapter. If not, do not use AC power.

To use battery power, remove battery cover

and insert three LR6 (AA) batteries.

Remove Spacer, Install Pan

Remove the red transport spacer: slide it back

and off. Place the stainless steel pan (if

provided) on the weighing platform. (The scale

can be operated without the pan, if desired.)

Allow at least 30-60 seconds warm-up time,

for scale to stabilize before operation.

SELECTING THE LOCATION:

Place on a firm, steady surface with sufficient space.

Avoid excessive air current, vibrations, heat sources, or rapid temperature changes.

SAFETY PRECAUTIONS

For dependable operation of this product, observe the following precautions:

•Verify that the input voltage printed on the power Adapter and the plug type

matches the local power supply (if using AC power).

•Make sure that the power cord does not pose an obstacle or tripping hazard.

•Disconnect the product from the power supply when cleaning.

•Do not operate this product in hazardous or unstable environments.

•Do not drop loads on the pan.

•Use only approved accessories and peripherals, as available.

•Operate the product only under ambient conditions specified in the Instruction

Manual.

•Service should be performed by authorized personnel only.

Remove red

transport

Spacer

Stainless

steel pan

rests atop

weighing

platform.

CS Series Scales Quick Start Guide

CS Series Scales Quick Start Guide ii Ohaus Corporation www.ohaus.com

DISPLAY

OPERATION

Place the scale on a horizontal flat surface.

Power Up test: All display segments appear briefly on power up.

Once 0appears, the scale is ready for use.

The on left indicates the a stable reading.

Press UNIT/CAL to switch weighing units: ounces, Newtons, grams

Overload: If the applied load exceeds the capacity of the scale,

Eappears. Remove the load immediately.

The scale will return to normal operation.

TARE: Values can be added progressively to a sample:

Press ON/ZERO OFF, the scale display returns to zero.

Add more weight, press ON/ZERO OFF to zero the scale again.

Add weight up to the capacity of the scale.

Place a container on the platform (eg, 20 grams).

Press ON/ZERO OFF. The display shows 0.00.

Add material to the container (eg, 25 grams).

Display shows weight of material – not the container.

When container and material are removed, display will show

weight of container as negative value. To return to normal

operation, press ON/ZERO OFF again.

Low Battery: The display shows Lo when the batteries are weak

and need to be replaced.

*80253050*

P/N 80253050

Symbol for

Ounces

Negative sign

Stability

indicator

Symbol for

Grams

Symbol for

Newtons

Table des matières

Autres manuels OHAUS Échelle

OHAUS

OHAUS TROOPER Manuel utilisateur

OHAUS

OHAUS DEFENDER SERIES Manuel utilisateur

OHAUS

OHAUS Scout SPX Manuel utilisateur

OHAUS

OHAUS HH 120D Manuel utilisateur

OHAUS

OHAUS C51 Series Manuel utilisateur

OHAUS

OHAUS Defender 3000 Series Manuel utilisateur

OHAUS

OHAUS PJX Series Manuel utilisateur

OHAUS

OHAUS Catapult 1000 Manuel utilisateur

OHAUS

OHAUS GT 210 Manuel

OHAUS

OHAUS YS202 Manuel utilisateur

OHAUS

OHAUS CS 2000 Manuel utilisateur

OHAUS

OHAUS TROOPER COUNT Manuel utilisateur

OHAUS

OHAUS 1600 Series Manuel utilisateur

OHAUS

OHAUS Guardian 3000 Manuel utilisateur

OHAUS

OHAUS Valor 1000 Manuel utilisateur

OHAUS

OHAUS EC Series Manuel utilisateur

OHAUS

OHAUS FD Series Manuel utilisateur

OHAUS

OHAUS Catapult 1000 Manuel utilisateur

OHAUS

OHAUS Aviator 7000 Manuel utilisateur

OHAUS

OHAUS SD35 Manuel utilisateur

OHAUS

OHAUS ES series Manuel utilisateur

OHAUS

OHAUS RI Series Manuel utilisateur

OHAUS

OHAUS Valor 1000 Manuel utilisateur

OHAUS

OHAUS Adventurer AX124/E Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur