OGSI MOGS - 100 Manuel utilisateur
Effective 11/2010
MOGS – 100
Installation, Operation and
Maintenance Manual
Oxygen Generating Systems Intl. (OGSI)
814 Wurlitzer Drive, North Tonawanda, New York 14120 USA
Tel: (716) 564-5165 Toll Free: (800) 414-6474 Fax: (716) 564-5173
E-mail: [email protected]
Website: www.ogsi.com
Part # 9000000.004
US$ 25.00
Effective 11/2010 Rev A
Table of Contents
Topic
Page Number
Using this Manual
1
Initial Inspection
2
Warranty Information and Liabilities
3
Safety Guidelines
5-6
Handling
5
Operating
6
Product Information
7-22
Features and Applications
7
PSA Technology
9
Components
10
Process Flow Description
21
Specifications
22
Safety Precautions
23
Pre – Installation
24
Required Operating Conditions
25
Set-up and Installation
26
Operating Instructions
27
Troubleshooting Guide
28
Touch Screen Overview
30
Manifold Design and Installation
44
Cylinder-Filling Procedure
46
Preventive Maintenance
49
Technical Service Assistance
51
Appendix
I-VII
Spare Parts List
I
Oxygen Cleaning Procedure
II
Oxygen Sensor Calibration Procedure
IV
Air Changes by Room Size
V
Units of Measurement
VI
Maintenance Log
VII
©2010, OGSI. All rights reserved. OGSI is a registered trademark.
This publication may not be reproduced in part or whole without written permission of OGSI.
Password to Access Touch Screen
647401
Please take appropriate measures to keep this password secure and prevent unauthorized access.
Effective 11/2010 1
Using the Manual
This manual is intended as a guide for operators of OGSI Oxygen Generators and
Oxygen Generating Systems. It includes information on our warranty policy, features,
functions, applications, proper set-up and installation, operation and maintenance of our
products.
The following symbols are used throughout the manual:
Information
(Do not use product before
reading the manual)
Electrical Hazard
Sound
Fire Hazard
No Smoking
Warning
No Open Flames
Power ON/OFF
Flow Meter
Timer
No Oil
Not Connected to Outlet
Effective 11/2010 2
The crate should be opened and inspected immediately upon delivery. Unpack the
unit at once and perform a visual inspection to determine if it is dented, bent or scratched.
Also check to make sure the power cord is attached and that the control panel has not been
damaged in any way during shipment.
If for any reason the unit should need to be returned in the future, the original
crate is the best way to ship it back to the manufacturer. Claims of damage due to freight
handling can only be filed by you, the consignee, as OGSI shipping terms are Free On
Board (FOB), North Tonawanda, NY USA. This means that once the equipment leaves
our dock you are the owner of it. OGSI has no legal claim to make against any shipping
company for damage.
At OGSI, we are committed to using shipping companies with good reputations
for taking care in the handling of freight and providing service in the event of damage.
Initial Inspection
Effective 11/2010 3
Warranty
Oxygen Generating Systems Intl., being a division of Audubon Machinery
Corporation (hereinafter OGSI), provides a warranty on its products (the "Products")
against defects in material and workmanship, under normal use and operation, to the
extent set forth in this Warranty.
THIS WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY OF OGSI WITH
RESPECT TO THE PRODUCTS AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED ALL OF WHICH ARE HEREBY DISCLAIMED TO THE FULLEST EXTENT PERMITTED
BY APPLICABLE LAW. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING
DISCLAIMER AND EXCEPT AS OTHERWISE SET FORTH IN THIS WARRANTY, OGSI
DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY WITH RESPECT TO THE PRODUCTS
AND ALL WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. THE WARRANTY OF
OGSI AS SET FORTH HEREIN IS FOR THE BENEFIT OF THE ORIGINAL USER OF THE
PRODUCTS AND IS NOT TRANSFERABLE WITHOUT THE PRIOR EXPRESS WRITTEN CONSENT
OF OGSI.
The OGSI Warranty provides the following:
1) OGSI shall repair or replace the Products free of charge to the original user where
defects in the material and/or workmanship are evident at the time of delivery.
Such replacement of the Products does not include damages incurred in shipping
the Products. If shipping damage is evident, the original user should contact the
shipper immediately. OGSI will pay for shipping the Products to the original user
as well as returning damaged/defective Products to OGSI. Once the Products are
repaired, OGSI will ship the Products back to the original user and cover all costs
incurred in shipping.
2) OGSI shall repair or replace the Products (excluding filter elements and sieve
material) free of charge to the original user where defects in material and/or
workmanship become evident between the time of delivery to the original user
and one (1) year from the date of delivery to the original user. OGSI will pay for
shipping the Products to the original user as well as returning damaged/defective
Products to OGSI. Once the Products are repaired, OGSI will ship the Products
back to the original user and cover all costs incurred in shipping. In no event
shall OGSI have any responsibility or liability for the cost of labor for the
removal of component parts or equipment that constitute part of the Products,
packaging of the component parts or equipment that constitute part of the
Products or the re-installation or replacement of the component parts or
equipment that constitute part of the Products.
3) The warranty provided by OGSI to the original user covers parts and equipment
specifically manufactured by OGSI and used as components or equipment that
constitute part of the Products. The warranty on parts or equipment manufactured
by third parties and included as part of the Products (e.g. air dryers, air
compressors, oxygen compressors, instrumentation, etc.) is limited to the
respective original warranties of such third parties.
Note: A Return Authorization Number must be obtained from OGSI prior to the return
shipment of the Product or any component parts or equipment of the Products.
Effective 11/2010 4
The Return Authorization Number must be visibly written on the outside of the package
of the returned Products, component parts or equipment as applicable or OGSI will not
accept the return.
Note: A Credit Certificate will be created for all Warranty Exchange transactions.
OGSI will provide the Credit Certificate with an invoice at the time of shipment to the
original user. The Credit Certificate must be included in the package to OGSI with the
returned products within 30 days of the date of the invoice. Failure to return Warranty
Exchange Products to OGSI within 30 days will make the Warranty Exchange process
void and payment for Products will be billed and due on receipt.
Note: The warranties of OGSI as set forth herein shall also become null, void and not
binding on OGSI if a defect or malfunction occurs in the Products or any part of the
Products as a result of:
a) A failure to provide the Required Operating Conditions for the Products
(See Page 25)
b) Repair, attempted repair, adjustment or servicing of the Products, or any
component parts or equipment that constitutes part of the Products by anyone
other than an authorized representative of OGSI. The authorized service
representative must obtain prior approval from OGSI‟s Service Manager before
performing any warranty work.
c) External Causes (e.g. flood, hurricane, tornado, fire, any natural disaster, or any
event deemed an act of God).
Molecular Sieve Replacement:
The breakdown of the molecular sieve inside the generator (dusting of the sieve)
only occurs if excess water/oil is entrained in the feed air stream. Under no circumstances
is the molecular sieve covered under any warranty by OGSI. If sieve dusting occurs on
your machine, check the air compressor, air dryer and filter elements.
Other Matters:
OGSI is not liable for any special, indirect, punitive, economic, incidental or
consequential losses or damages including without limitation, loss of use, malfunction of
OGSI products, replacement oxygen charges, delays or lost savings related to the
Products or otherwise even if OGSI shall have been advised of the possibility of such
potential losses or damages.
Limits of Liability
OGSI Oxygen Generator products shall not be used for breathable or medical oxygen
applications, unless they are assembled with the appropriate support equipment, tested, and
operated in compliance with either American, Canadian or ISO norms for hospital oxygen
systems.
Table des matières
Autres manuels OGSI Équipement d'oxygène
Manuels Équipement d'oxygène populaires d'autres marques
DeVilbiss
DeVilbiss iFILL PD1000A Series Manuel
Inova Labs Inc.
Inova Labs Inc. LifeChoice Manuel utilisateur
Nidek Medical
Nidek Medical OCSI Manuel utilisateur
Point Four Systems
Point Four Systems MBD075 Manuel utilisateur
John Bunn
John Bunn Optium JB0180 Manuel utilisateur
Dräger
Dräger Oxy K 30 E/S Manuel utilisateur