Offacy CEK-206 Manuel utilisateur
CEK-206
1
1 × BARISTA KETTLE
1 × Quick Guide
1 x Power Base
11.0*8.6*8.2 inches
30*22*21cm
2
3
4
2. Click the " " to start,and click
" " " " to adjust the preset
temperature to the temperature
you need.
5
1. Add water to the kettle,Do not exceed the
maximum water mark.
5. The keep warm function of the device is the
default，and the water temperature will be
maintained for one hour after the heating
is completed.Click the keep warm button to
change the switch of the keep warm function.
4. Click the power button, the power button
lights up in red, and the kettle starts to heat.
If the set temperature is lower than the liquid
temperature of the kettle body, the
power butto and the screen will flash three times
quickly, indicating that the heating fails.
6
After boiling water, click "+" and "-" to select the keep warm temperature, and then
press the keep warm button to enter the keep warm state.
If the keep warm icon on the display flashes, the kettle is already in the keep warm state.
When the temperature of the kettle is higher than the set insulation temperature, the kettle
will not start heating.
When the temperature of the kettle is lower than the set insulation temperature, the
kettle will start to work until the temperature reaches the set insulation temperature
andstops heating.
The default keep warm time is 1 hour. After the heating is completed, it will automatically
enter the heat preservation mode.
The default temp of keep warm setting is: 80°C/176°F
Short press“ ”button,the screen will light up.
7
Short press“ ”button,the screen will light up.
8
Autres manuels Offacy Bouilloire
