OE electrics QikBOX Manuel utilisateur
QIKBOX Assembly instructions
INSTR1209
www.oeelectrics.com
UK -
1Identify if ribs need removing prior to adding power/data/
AV to QIKBOX
Ribs don’t need removing
Ribs do need removing
QF5 data/AV
Power Module
+ TUF
Power Module
+ QF5 Data/AV
2 x Power
Module
QIKBOX Assembly instructions
INSTR1209
www.oeelectrics.com
UK -
2Attach mounting clips to QIKBOX
4Align QIKBOX with surface and screw into
place 5Add modules to QIKBOX
6Add power cable
Left
Right
For QIKBOX with 2 x power modules see next page
22.0
44.0
263.5
22.0
44.0
263.5
3
Mark mounting holes. Use No.10 pan
head screws.Length dependent on surface
mounted to.
QIKBOX Assembly instructions
INSTR1209
www.oeelectrics.com
UK -
2Attach mounting clips to QIKBOX
4Align QIKBOX with surface
and screw into place 5Add modules to QIKBOX, align to right hand side rst
7Add power cable
Left
Right
These instructions are for 2 x power modules only! *NOTE: If using QF Power Modules please see
INSTR1213 - Fitting 2 x QikFit Modules Together.pdf or view the video here: QikFit Power Modules
6QF1 spacer required at
right hand side
3
Mark mounting holes. Use No.10 pan
head screws.Length dependent on surface
mounted to.
22.0
44.0
263.5
22.0
44.0
263.5
Table des matières
Autres manuels OE electrics Accessoires
