OCO Pro Bullet Manuel utilisateur
1
Oco Pro Bullet
Setup Guide
3
Hi, I’m Oco!
I’m very easy to install.
However, if you have any questions, don’t hesitate
to contact our 24/7 support team at
support@getoco.com,
or call us at 1-888-683-8950 (English only).
4
5
Content
Setting up your Oco ••••••••••••••••••••••••6
Connecting your Oco •••••••••••••••••••••••8
Mounting the camera••••••••••••••••••••••••9
Adding Cloud Storage •••••••••••••••••••••• 11
Activating Micro SD card••••••••••••••••••••12
Granting Access to Other Users ••••••••••••••13
Adjusting notifications settings •••••••••••••••14
Adjusting the sensitivity of the motion sensor• • • 14
Integrating Other Smart Devices via IFTTT •••••15
6
Setting up your Oco
1. Log into your account at www.ivideon.com (If you
do not have an Ivideon account yet, please visit www.
ivideon.com and sign up). Go to “My cameras” tab and
click “Add a camera or a DVR”.
2. Choose “Ivideon-powered camera”. Follow the
instructions.
3. Create a name for your camera, then enter your
camera MAC address.
4. Connect one Ethernet cable to the LAN IN port of
your router, and connect the other to the LAN port of
the PoE injector.
5. Connect the second Ethernet cable to the PoE port
of the PoE injector, and connect the other end with the
camera.
Note: Don’t connect the power adapter to a power
socket before you will be prompted!
The Mac
Address can
be found on
the sticker on
the back of
your camera
7
6. When prompted, plug the PoE power adapter into
the power outlet and click “Next”. Oco will boot and
connect to the cloud.
7. Please be patient, the connection could take up to
several minutes.
8. Once the camera is connected, you will be prompted
to set up the WiFi connection. You can always set up
the WiFi connection later, just click “Settings” icon
of the selected camera (hamburger icon) and choose
“WiFi settings”. Choose your Wi- Fi network and
enter the password for the network. Once the camera
is connected to your Wi-Fi, you can unplug the the
Ethernet cable from you router/switch.
9. Download Ivideon App for your smartphone and log
in with your Ivideon account.
8
Mounting the camera
1. When sizing a hole for the screws, drill holes in
the wall according to the drill template.
2. Route the corresponding cables.
3. Secure the camera to the wall with the supplied
Screws.
Adjust the Lens
1. Loosen the adjustable nut.
2. Adjust the pan direction [0°~360°].
3. Adjust the tilt direction [0°~90°].
4. Rotate the camera [0~360°] to adjust the lens to
the appropriate surveillance angle.
5. Tighten the adjustable nut to complete the installation.
9
Note: Pay attention to the following precautions
to prevent IR reflection:
1. Dust or grease on the dome cover will cause IR
reflection. Please do not remove the dome cover
film until the installation is finished. If there is dust
or grease on the dome cover, clean the dome
cover with clean soft cloth and isopropyl alcohol.
2. Make sure that there is no reflective surface
too close to the camera lens. The IR light from the
camera may reflect back into the lens, causing
reflection.
10
Adding Cloud Storage
1. Sometimes you’ll want to add more people to
your account, or you’ll need to store data for a
longer period. That’s no problem, our Cloud plans
can help.
2. You can activate extended Cloud Recordings by
choosing one of the Ivideon’s price plans (learn
more at getoco.com).
3. Open the Ivideon App. Choose Camera Settings
-> Cloud Archive, and follow the Setup Wizard.
Note: if you are using the camera for home monitoring
and don’t see our Free Plan, then please contact
support@getoco.com for manual activation.
Table des matières
Autres manuels OCO Caméra de sécurité
