Oce Perfect Binder-C1 Manuel utilisateur
Perfect Binder-C1
Operating information
Océ User Manual
Copyright
Copyright 2011 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, or by any information
storage or retrieval system without the prior written permission of Canon Inc.
© 2011, Océ
All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted
in any form or by any means without written permission from Océ.
Océ makes no representation or warranties with respect to the contents hereof and specifi-
cally disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Océ reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation to notify any person of such revision
or changes.
Edition: 07-2011
Contents
Chapter 1
Preface.................................................................................................................5
Notes for the reader...................................................................................6
Naming conventions for finishers (commercial naming and naming in
User Interfaces)..........................................................................................8
Chapter 2
Periodic test of the breaker................................................................................9
Check the breaker.....................................................................................10
Check sheet for periodic testing of the Perfect Binder-C1....................13
Chapter 3
Before you start using this machine...............................................................15
Parts and their functions..........................................................................16
Exterior view.......................................................................................16
Outline of the binder's mechanisms.................................................18
Outline of bookbinding procedure....................................................20
Main power...............................................................................................22
Turn the main power on....................................................................22
Turn the main power off....................................................................23
Energy saver and energy save mode...............................................24
Chapter 4
Basic operations................................................................................................27
Make a perfect-bound book.....................................................................28
Types of paper that can be used.............................................................29
Finished sizes of booklets........................................................................32
Remove finished booklets.......................................................................36
Discard cuttings........................................................................................40
Replenish glue..........................................................................................42
Clean the binder.......................................................................................45
Chapter 5
Troubleshooting................................................................................................47
Clearing paper jams.................................................................................48
Clear a paper jam inside the top cover.............................................48
Clear a paper jam inside the front cover..........................................52
Clear a paper jam in the stacker........................................................58
Reduce frequent paper jams or errors..............................................61
Other..........................................................................................................63
Job cannot be perfect-bound error scenario...................................63
3
Contents
Check the status of the trimmer waste box......................................64
Check if the blade and the blade receptor must be replaced.........65
Check the status of the glue..............................................................66
Adjust cover position.........................................................................67
Adjust glue amount............................................................................68
Alarm list.............................................................................................70
Power does not turn on.....................................................................72
When the main power is turned off during operations (check the
stacker)................................................................................................73
Appendix A
Miscellaneous....................................................................................................75
Specifications............................................................................................76
Glossary....................................................................................................79
4
Contents
Chapter 1
Preface
Notes for the reader
Introduction
This manual helps you to use the Perfect Binder-C1. The manual contains a description
of the product and guidelines to use and operate the Perfect Binder-C1.
Definition
Attention-Getters
Parts of this manual require your special attention. These parts can provide the following:
•Additional general information, for example, information that is useful when you
perform a task.
•Information to prevent personal injuries or property damage.
Warning, Caution and Note
The words Warning, Caution and Note draw your attention to important information.
Overview of the attention-getters#
IndicatesIconWord
Ignoring this warning could cause serious injury or
even death.
The Warning indication has several icons that warn
against various hazards. The icons are shown below.
Warning
General hazardWarning
Hot surfaceWarning
Electric shockWarning
Moving partsWarning
Laser beamWarning
Chapter 1 - Preface6
Notes for the reader
IndicatesIconWord
Ignoring this warning could cause injury or damage to
property.
Caution
Indicates additional important information.Note
The use of heat-resistant gloves is mandatory when you
carry out these actions.
Important safety instructions
Warning:
The following caution label is attached to the machine. To use the machine safely, pay
attention indicated on the caution labels.
Illustration
Chapter 1 - Preface 7
Notes for the reader
Naming conventions for finishers (commercial naming and
naming in User Interfaces)
Hardware and hardware naming in User Interfaces
To improve the readability of texts in User Interfaces of operator panels and software,
the finishers are generally referred to by their function. The table below shows the naming
conventions for finishers (commercial product names and the way these are referred to
in User Interfaces).
Note:
In some cases, there is only 1 name for several modules. The reason is that a configuration
can only contain 1 of the available types of modules.
Conversion table for commercial names versus user-friendly names in User Interfaces#
In UI, printer driver and software re-
ferred to as:
Commercial product name:
'Stacker/stapler'Finisher-AF1
'Stacker/stapler'Saddle Finisher-AF2
'Puncher'Puncher Unit-BP1/BQ1/BR1
'Folder'Paper Folding Unit-F1
'Inserter'Document Insertion Unit-F1
'Stacker'High-Capacity Stacker-E1
'Trimmer'Booklet Trimmer-D1
'Trimmer'Two-Knife Trimmer-A1
'Perfect Binder'Perfect Binder-C1
'Scanner'Duplex Color Image Reader Unit-D1
Chapter 1 - Preface8
Naming conventions for finishers (commercial naming and naming in User Interfaces)
Chapter 2
Periodic test of the break-
er
Check the breaker
Introduction
A breaker that detects over current and short circuits is equipped in order to prevent
electric shock on the product.
Be sure to perform the following procedure once or twice a month to periodically test
the breaker.
Caution:
Periodic testing of the breaker should be performed with the binder's power switch turned
on. Turn off the power to the printer so that the binder does not operate during the test.
Caution:
If a breaker test reveals that it is not operating normally, contact your local authorized
dealer.
Caution:
Do not keep the test button pressed down. Press and immediately release it.
Caution:
The test button is not intended to be used to turn power on and off.
Chapter 2 - Periodic test of the breaker10
Check the breaker
Table des matières
Autres manuels Oce Accessoires pour imprimantes
Oce
Oce im5530 Manuel utilisateur
Oce
Oce FS-520 Manuel utilisateur
Oce
Oce E1 Manuel utilisateur
Oce
Oce im2330 Manuel utilisateur
Oce
Oce Booklet Trimmer-D1 Manuel utilisateur
Oce
Oce Tensioning winder 30 Manuel utilisateur
Oce
Oce XDL Manuel utilisateur
Oce
Oce Saddle Finisher-AF2 Manuel utilisateur
Oce
Oce im4511 Manuel utilisateur
Oce
Oce im4530 Manuel utilisateur
