NZ AutoTraps AT220 Manuel utilisateur

AT220

Manual

NZ AutoTraps

 
1 
NZ AutoTraps AT220 Manual 7/31/2023 
 
 
1CONTENTS 
2AT220 Components ..................................................2 
3Health & Safety: .................................................... 3-4 
4Trap Button and LED................................................5 
5Setting up the AT220...............................................6 
Package contents:.........................................................6 
Mounting the AT220: ............................................... 7-8 
Filling the bait: ...............................................................9 
Bait Pouch Hints:.........................................................10 
Connecting/Replacing the battery: ......................11 
Charging the Battery............................................ 12-13 
6Quick visit checks....................................................14 
Daylight Deactivation Feature: ..............................14 
Clearing Set Up ...................................................... 15-17 
Clearing Debris.............................................................18 
7LED and Button Functions....................................19 
LED functions .......................................................... 20-21 
Button functions...........................................................22 
8Making the trap safe..............................................23 
Short term safe............................................................23 
Long term safe .............................................................23 
9Trouble Shooting .....................................................24 
Trap won’t reset or is only ½ set: ........................24 
Trap keeps going off:.................................................25 
Trap wont trigger:.......................................................26 
10 Contact Details .....................................................26 
 

NZ AutoTraps AT220 Manual 7/31/2023

2AT220 COMPONENTS

Bait Bottle (

Older Model)

Or Pouch (under lid).

Trigger Eyes

Spring kill

power

Kill Bar

Possum keyhole

Trap Reset Motor

Drive Assembly

Trap PCB controller

Rechargeable

Battery.

NZ AutoTraps AT220 Manual 7/31/2023

3HEALTH &SAFETY:

The AT220 is designed to kill Possums and can cause serious harm to the user

if not treated with care and caution.

The trap trigger is sensitive and can be activated by a bump or knock.

Before handling the trap, the kill bar should be down, and the battery

unplugged. See Making the trap safe page 23.

Even if not

set, the

mechanism

should be

treated with

an adequate

level of

vigilance



WARNING: NEVER PLACE A HAND OR FINGER

INTO THE INSIDE OF THE TRAP UNDER ANY

CIRCUMSTANCE

NZ AutoTraps AT220 Manual 7/31/2023

If any necessary intervention is in the path of the kill bar, then we

recommend to use the NZAT Long Gripper, see page 17

Kill-Bar Direction

✓

Carry or handle the

trap from the hanger

You can also carry from the back bar

which is never in the path of the kill

bar and sits behind the set position.

NZ AutoTraps AT220 Manual 7/31/2023

4TRAP BUTTON AND LED

On the control box there is an LED (small light) and small button. These are

used for manual control of the trap and diagnostics.

It is important to identify these before continuing as they are required in a

substantial portion of the tasks.

Please find them now

Button

LED (light)

NZ AutoTraps AT220 Manual 7/31/2023

5SETTING UP THE AT220

PACKAGE CONTENTS:

AT220 automatic resetting and rebaiting trap

•1x battery pack

•1x complementary battery charger

(Single purchases only) *

•500ml bait bottle or 350ml bait pouch

•2x mounting screws

*Bulk and repeat purchases may not include a charger

NZ AutoTraps AT220 Manual 7/31/2023

MOUNTING THE AT220:

Follow carefully to maximise the capabilities of the AT220

For Possums, rats, and mice: The trap is best mounted 300mm (bottom of rat

ladder! )- above a ramp or small platform.

For Feral Cats:

Mounting the trap lower to the ground and a ramp less steep should improve

feral cat kills but a potential by-kill increase will have to be considered. Please

treat alternative mountings with care.

If Within a Kiwi Zone or Around Domestic Pets: mount the trap at least

750mm high and use a ramp. A rough sawn fence pale or batten at 45° for the

ramp works well.

WARNING: BEFORE MOUNTING OR HANDLING THE AT220 BE

SURE THE KILL BAR IS DOWN AND THE BATTERY IS

DISCONNECTED

NZ AutoTraps AT220 Manual 7/31/2023

Mounting: Fix the trap to a clean tree using two screws through the top

mounting tag only. The rest of the trap must be able to swing out from

mounting object, to ensure efficient possum execution.

The ramp or platform should be positioned so that the excess bait from the

traps auto rebaiting drips onto the ramp or platform below. This excess acts

as a pre-feed, encouraging a reluctant pest to return.

If the mounting location is on a steep slope, mount the trap on the high side

of the tree with the ramp back into the slope. Due to possums normally

approaching the trap from the high side.

Check bait block overflow: The best trap and ramp position is when bait

block overflow runs on to the keyhole and then on to the ramp. Reposition

the trap or ramp as required to let the bait overflow fall on to the ramp.

NZ AutoTraps AT220 Manual 7/31/2023

FILLING THE BAIT:

If using a bait bottle only refill to ¾ full. We recommend that the bottle is not

overfilled.

After refilling a bottle stir the old and new baits together. Use a clean tool to

stir- dirty sticks may cause blockage in pump and tube due to foreign material

added to bait.

If refilling a pouch massage the pouch to stir the old and new baits together.

Note: a pouch can be refilled or replace with new pouch- and refill at base.

Three Button clicks sets the bait to manual pump (LED amber/orange).

Press and holding the Button now runs the bait pump. This will time out after

30 minutes.

Excess bait should drip onto the keyhole then onto the ramp. Reposition the

trap or ramp if the excess bait misses the ramp.

Select trap Auto. Press the Button 4 times, LED changes to green and the trap

reset will restart.

Extra Bait can be Purchased from our Website:

NZAutoTraps.com

Autres manuels pour AT220

Table des matières

Autres manuels NZ AutoTraps Lutte antiparasitaire

NZ AutoTraps

NZ AutoTraps AT220 Manuel utilisateur

Manuels Lutte antiparasitaire populaires d'autres marques

Woodstream

Woodstream Victor RZC001-4 Manuel utilisateur

Gardigo

Gardigo 90160 Manuel utilisateur

Bird-X

Bird-X Super Broadband PRO Manuel utilisateur

Bird-X

Bird-X Super BirdXPeller Pro Manuel utilisateur

Radarcan

Radarcan PORTABLE MOSQUITO REPELLER Manuel utilisateur

DynaTrap

DynaTrap DT0500IN Manuel utilisateur

BRC

BRC FLYinBOX 20 Manuel utilisateur

ECOstyle

ECOstyle Cat & Dog free 200 m2 Manuel utilisateur

Bell LABORATORIES

Bell LABORATORIES PULSE MOUSE IQ Manuel utilisateur

Gimenez Ganga

Gimenez Ganga Saxun 27 Vertical Manuel utilisateur

Silverline

Silverline gardenSystem Cat & Dog Free 200 Manuel utilisateur

Segula

Segula 50520 Manuel utilisateur

Isotronic

Isotronic Spacedog II Manuel utilisateur

Radarcan

Radarcan radarhealth RH-105 Manuel utilisateur

Heitronic

Heitronic 90111 Manuel utilisateur

Beamshot

Beamshot BR100 Manuel utilisateur

Kerbl

Kerbl UltraStop Rat&Mouse Manuel utilisateur

Weitech

Weitech WK0025 Manuel utilisateur