Nymet WaterMe Manuel utilisateur
User Manual
Wireless Irrigation Controller
www.control-me.net
www.waterme.com.au
2
Thank you for purchasing a WaterMe Wireless Irrigation Controller.
Nymet Australia have designed and manufactured a Wireless Irrigation Controller that is straightforward to install and simple
to use. The WaterMe Wireless Irrigation Controller is capable of up to 10 programmable watering zones that can be controlled
remotely through any device that has internet connectivity. e.g. Smart Phone, Computer or Smart TV at www.control-me.net
Before you use WaterMe please read this installation guide thoroughly to ensure the product is congured and installed
correctly.
Download WaterMe App
To download the WaterMe App please search for‘WaterMe‘ on your mobile device. WaterMe is compatible with both Apple
and Android mobile platforms.
Support
User support is available via [email protected] as well as ongoing product information and updates at
www.waterme.com.au
The contents of this manual will be periodically updated or revised due to product updates. New versions of the WaterMe
Installation/User Guide will be available via visiting www.waterme.com.au/support
Introduction to WaterMe
3
!Note
• NOTE indicates something of importance that should be acknowledged during the installation process
Caution
• CAUTION indicates a hazard in which, if not avoided, could result in damage to your WaterMe Wireless Irrigation
Controller and it not functioning properly, and/or physical human damage
!
iInformation
• INFORMATION indicates additional information, important contents or tips that will assist you in the installation and
set up process.
Please take note of the following symbols as they will ensure successful installation and operation of your WaterMe Wireless
Irrigation Controller.
Once the WaterMe Wireless Irrigation Controller has been connected to a power source, the main indication light will display a
colour representing a connection type.
Type Description
Green Solid Device has established an internet connection and is communicating with the WaterMe
server
Green and Red Flashing Device is in pairing mode. Press conguration button for two beeps.
2 Green and 2 Red Flashing Device is in access point mode. Press the conguration button for three beeps.
Red Flashing Device is looking for the Wi-Fi network
Green Flashing Device is looking for a connection to the WaterMe server
Red Solid Device initialisation
Symbols Explanation
LED Denitions
!Note
• Please note that the WaterMe main status indicator light may ash green intermittently. This is normal.
4
Unpack and Check Components
No. Item Description
1 WaterMe Wireless Irrigation Controller Rear Housing Assembly + Power Adapter (Connected)
2WaterMe Front Housing Front Housing
3 Quick Start Guide Contains the most relevant information in getting WaterMe operational
4Power Adapter (1.5 Metres) 100 - 240V
50/6042, 2A Max
Output = 24V
Power adapter comes connected to the WaterMe controller.
52x Stainless Steel Screws Size: M5
64x Cover Mounting Screws Size: M5
7 2x Wall Plug Size: 7mm x 25mm
81” Flow Sensor 2-100LPM
60˚C Max Temp
Caution
• Only use the equipment supplied by Nymet Australia i.e. Power Pack. Use of non approved components may
result in damage to WaterMe and void the warranty
!
12 3
6 8
4
x2 x4
57
x2
5
Item Description Desirable Essential
Internal Network Wi-Fi modem connected to your network ü
Internet Browser Chrome, Safari, Internet Explorer, Firefox ü
Smart Phone with Internet Access Please be aware data charges may apply ü
Solenoid Valves Used to control the opening and shutting of sprinklers ü
Flow Sensor (additional sensors are
optional)
1” ow sensor supplied with your controller. The
WaterMe Wireless Irrigation Controller is capable of
supporting up to 3 ow sensor Inputs.
ü
Rain Sensor Detect the presence of rain to alter watering
conditions.
- -
Moisture Sensor Moisture sensor detects moisture in the air to determine
whether watering is necessary
- -
Screw Driver (3mm Blade Flat Head) Connecting valve wires to the controller ü
Screw Driver (Phillips Head) Mounting the controller to a wall ü
Before proceeding please ensure that you have the following items available to successfully install and connect your WaterMe
Wireless Irrigation Controller.
Pre-Installation Setup
Minimum Checklist Required for Operation
The following checklist are the minimum items required for WaterMe to operate. Further information regarding checklist items
are described in detail throughout this technical user guide.
Item Desired Essential
WaterMe connected to the network by Wi-Fi ü
Flow sensor installed ü
WaterMe App downloaded from Apple App Store or Google Play ü
WaterMe activated and registered on the WaterMe Server ü
Must see green connection icon on the summary screen (mobile app only) ü
Flow calibrated for all zones (if ow sensor is installed) ü
Selecting time zone setup for device ü
Rainfall parameters established ü
AC or DC latching connection established ü
Default action set up for alarms ü
Setup master valve delay time ü
Setup zone delay time ü
All solenoids and sensors have been connected ü
Zones setup for operation ü
6
Contents
Section 1.0 How does WaterMe Operate 7
1.1 WaterMe Wireless Irrigation Controller 8
Section 2.0 Connection to the Internet 9
2.1 Connecting via Wi-Fi through your Mobile Phone 10
2.2 Register WaterMe Via your Mobile Phone 12
2.3 Connecting via Wi-Fi through your Personal Computer 13
2.4 Register WaterMe via your Personal Computer 15
Section 3.0 Determine the Installation Location 17
3.1 Installation Types 18
3.2 Making an Incision in the Grommet 19
3.3 Mounting the WaterMe Wireless Irrigation Controller 20
Section 4.0 Connecting the Valve and Sensor Wires 21
4.1 Connecting Wires to the Terminals 24
Section 5.0 Mounting the Front Housing 25
Section 6.0 Flow Sensor - Installation and Connection 26
6.1 Additional Sensors - Installation and Connection 28
Section 7.0 Website Navigation and Operation 29
7.1 Weather Schedule 36
7.2 WaterMe Flow Calibration 39
7.3 Deleting your WaterMe Account 40
Section 8.0 Mobile App Navigation and Operation 41
8.1 WaterMe Flow Calibration 46
8.2 WaterMe App Conguration 47
8.3 Push Notications 51
8.4 Weather Schedule 52
Section 9.0 Troubleshooting 55
Section 10.0 Exclusions of Liability 56
7
Server
The WaterMe Wireless Irrigation Controller is connected to the WaterMe Server by wireless connection to your wireless internet
modem/router. The diagram below provides an example of how the WaterMe Wireless Irrigation Controller connects to the
WaterMe Server and can be controlled through your computer or mobile phone. In most cases the controller is connected to the
network via a Wi-Fi connection.
No. Item Description
1. WaterMe Wireless
Irrigation Controller
The WaterMe Wireless Irrigation Controller is connected to the network via Wi-Fi.
2. Computer WaterMe can be controlled and monitored by any computer at any location providing
there is a connection to the internet.
3. Smart Phone (e.g. iPhone
or Android Platform)
WaterMe can be controlled and monitored by a smart phone (Apple and Android
supported) at any location in the world providing there is an internet connection.
4. Modem A modem provides WaterMe with a connection to the internet. This is required for
WaterMe to communicate with the WaterMe Server allowing remote management of
your irrigation system.
5. Internet An internet connection provides the mode of communication between the WaterMe
controller and your smart phone or computer.
6. WaterMe Server The WaterMe Server holds all of your irrigation information, schedules and settings. The
Server allows you to control WaterMe remotely from any location from your smart phone
or computer providing there is an internet connection.
1
2
3
4
5
6
How does WaterMe Operate
SECTION 1.0
8
Me
The WaterMe Wireless Irrigation Controller can be controlled and monitored from any location by logging into www.control-me.
net on a computer or through the WaterMe App which is available from the Apple App Store and Google Play (the WaterMe App is
compatible with both Apple and Android devices).
External Top View
No. Item Description
1. Main Status Light Indicates that WaterMe has power to the device
2. Zone Indication Lights Indicates which zone is operational
3 Power Connection Outlet Outlet for the power supply
4. Cover Screw Holes Used to secure the top cover to the base
5. Standard Wire Conduit Standard installation with wire extrusion at the bottom of the device
Internal Top View
No. Item Description
1. Main Status Light Indicates that WaterMe has power to the unit
2. Zone Indication Lights Indicates which zone is currently active
3 Terminal Inputs Solenoid wire connection points
4. Sensor Inputs Inputs for ow sensor and optional rain and moisture sensor
5. Wireless Antenna Allows wireless connection to an internet Wi-Fi modem
6. Power Connection Point Connection point for the power supply
7. Smart Wire Conduit Rear conduit allows solenoid wires to extrude from the rear of the unit
8. Wall Mount Screw Holes Used for installation of the WaterMe unit
9. Standard Wire Conduit Standard installation with wire extrusion at the bottom of the unit
10. Smart Conguration Button Used to congure a Wi-Fi connection using your SSID & password
External Top View Internal Top View
1
2
345
1
2
34
5
6
7
8
9
SECTION 1.1
WaterMe Wireless Irrigation Controller
11
10
Pairing mode is used in conjunction with the smartphone
app. Input of the SSID and password will prompt a pairing
between your network and the WaterMe unit. Once a
connection is established, the unit will be controlled via
the smartphone app as long as a stable internet signal is
maintained between WaterMe and your network.
Access point mode can be used if conguration is to
be achieved uisng a Wi-Fi enabled PC, or if there are
incompatibility issues with your router and pairing mode is
unsuccessful. This method of conguration displays all Wi-Fi
routers in range, allowing your network to be selected and
connected to.
Option 1: Pairing Option 2: Access Point Mode
9
The WaterMe Wireless Irrigation Controller requires a connection to the internet to allow remote access from your smart phone,
computer or any device with an active internet connection. This connection can be established via a Wireless connection through
an ADSL/Wi-Fi modem. You must ensure that the WaterMe Wireless Irrigation Controller is connected within range of your Wi-Fi
modem. The range of Wi-Fi signal will vary depending on the model of your wireless modem and interference from nearby
objects. As a general rule you will be able to achieve line of sight distances of around 50 metres. The WaterMe unit requires input
of your network SSID and password. There are two ways to achieve this: pairing and access point mode.
!Note
• Please ensure that your modem is Wi-Fi capable (802.11b/g).
• WaterMe operates with a 2.4 GHz or dual band router. If connection is unsuccessful, please check that your
router matches these specications.
SECTION 2.0
Connection to the Internet
10
4. Enter the required information on the smart
conguration page.
Description:
1. Enter the SSID of your Wi-Fi network: This is the
name of your home network that would have been
allocated during initial setup of your Wi-Fi modem.
2. Your Wi-Fi password: This password is unique to
your home Wi-Fi network and would have been
allocated during initial setup of your Wi-Fi modem.
SECTION 2.1
Connecting via Wi-Fi through your Mobile Phone
To congure WaterMe from your mobile phone please ensure you have the following available:
No. Item
1 WaterMe Wireless Irrigation Controller
2Connection to a power supply
3 2.4 GHz or dual band capable router
4 Internet capable mobile phone (Apple or Android operating platform)
1. Download the WaterMe app to your mobile phone
by searching for‘WaterMe’ in the App Store (Apple) or
Google Play (Android).
2. Open the WaterMe App from your mobile phone.
• From the WaterMe app you are able to pair your
WaterMe device to your home Wi-Fi network.
3. Press the ‘Device’ button.
!Note
• Please do not press‘Start’ at this point.
2
1
!Note
• Please note that your mobile device must be
connected to your Wi-Fi network, not 3G/4G
Pairing Method !Note
• It is advisable that you wire your WaterMe unit
AFTER all software conguration is complete
Table des matières
