NY Wholesale DT608 Series Manuel utilisateur

USER MANUAL

DT-ENG-608-V1 / 201708

• Please read this manual carefully to ensure safe and correct operation.

• Keep this manual well for future reference.

RF CARD

EP608-S12DT608/ID/FE-S8 DT60C-S8

DT608 Series

2 WIRE SYSTEM

Fisheye door station with proximity access control

CONTENTS

PARTS AND FUNCTIONS ..................................................................................... 3

Part Names............................................................................................................. 3

Mounting................................................................................................................. 3

Terminal Description............................................................................................... 4

BASIC FUNCTIONS .............................................................................................. 5

Unlock Operations.................................................................................................. 5

Fisheye Camera ..................................................................................................... 5

External Motion Detection ...................................................................................... 5

SETUP INSTRUCTIONS........................................................................................ 6

Functions Setting Up .............................................................................................. 6

Setting Door Station Address ................................................................................. 7

Setting Door Station Calling Mode ......................................................................... 7

Setting Camera N/P Standard................................................................................ 9

Setting Prompt Voice.............................................................................................. 9

Setting Prompt Voice Volume................................................................................ 10

Setting Unlock Mode ............................................................................................. 10

Setting Unlock Time............................................................................................... 11

Setting Nameplate Illumination Mode.................................................................... 11

Setting Night View LED Illumination Mode............................................................ 12

Setting Ring-back Tone ......................................................................................... 12

Setting Image Display Mode.................................................................................. 13

RAINY_COVER Congure .................................................................................... 14

Registering ID Card............................................................................................... 15

Restore To Default................................................................................................. 17

WIRING ................................................................................................................. 18

Connecting Electric Lock....................................................................................... 18

As The Villa System Door Stations........................................................................ 19

As The Apartment System Door Stations.............................................................. 20

APPENDIX ............................................................................................................ 21

Precautions............................................................................................................ 21

Specication .......................................................................................................... 21

Cables and Requirments....................................................................................... 22

-3-

Part Names

PARTS AND FUNCTIONS

[9]

[10]

[11]

[12]

[8]

[7]

[6]

[5]

[1]

[3]

[4]

[2]

[1] Microphone

[2] UNLOCK indicator

[3] CALL indicator

[4] Call button

[5] Nameplate

[6] Speaker

[7] Night view LED

[8] Camera lens

[9] Rainy cover

[10] Mounting hook

[11] Connection port

[12] External key module

Mounting

1 2 3 4 5

Rainy cover

The distance between

the top of main unit

and rain cover should

be not less than 3mm.

Main unit

≥3mm

AcDbMLeader (ACDB_MLEADER_CLASS)

Rainy cover

Main unit

1. Drill holes in the wall to match the size of screw stoppers, then attach the rainy cover to the

wall.

2. Connect the cable correctly, and attach the main unit to the rainy cover. The distance between

the top of main unit and rain cover should be not less than 3mm.

The installation height is suggested to 145~160cm.

-4-

PARTS AND FUNCTIONS

Lock Control Jumper: To select the lock type.

3P Connect Port: 1. If the external key module is detected online, the port will be

automatically as a communication port;

2. If there is no the external key module, it will check whether the PIR function is enabled. If the

PIR function is enabled, it will be as the detection port of the PIR;

3. If above cases are not activated, GND and PIR can be used as exit button port.

Main Connect Port: To connect the bus line and the electronic locks.

• L1,L2: Connect to the bus line, no polarity.

• PL: External lock power input, connect to the power positive(power +).

• S+: Lock power(+) output.

• S-: Lock power(-) output, connect to the power(-) input of locks(only when using the door

station to power the locks, if using the external power supply for the locks, the S- will not be

connected).

1 2 3

Lock Control Jumper

3P Connect Port

+12V

GND

PIR

L1 L2

S+ S-

Main Connect Port

3. Install the name plate.

4. Attach the front panel to the rainy cover.

5. Use the special screwdriver and the screws to x the panel.

Terminal Description

-5-

BASIC FUNCTIONS

Unlock Operations

Unlocking of ID Card

When the registered user card has been shown to ID card window, the UNLOCK indicator lights

up, the buzzer sounds,and the electric door strike is unlocked.

• If show the authorized user card,the buzzer will sound of beep+,and the UNLOCK indicator

will light up.

• If show the unauthorized user card,the buzzer will sound of beep,beep,beep.

Fisheye Camera

External Motion Detection

Please note that this function requires the

monitor with sheye function to support.

The angle view is 1700,visitors in this angle

view can be seen clearly and can be zoomed

to see individuals up close via indoor monitor

with sheye function.

The door station is equipped with a terminal to

connect external motion detector.

If the external motion detector is connected

to the system,following functions will be effec-

tive:

If detect someone passing by, the door station

can be activated operation to unlock or turn

on light.

Standard

door station angle

DT608

1700door camera angle

(Wide angle view shown)

12V

Motion

detector

GND

PIR

* Please contact with supplier for more details about

detector connection.

-6-

SETUP INSTRUCTIONS

Functions Setting Up

KEY_1

KEY_2

KEY_3

KEY_4

KEY_SET

LED_UNLOCK

LED_CALL

LED_NAME

Main unit

RF CARD

This section explains the settings of each

function, please refer to the following table:

To perform the settings for the function

you want,you should move away the metal

front panel. Please refer to the sketch

map.

Each operation is indicated by the lighting

up of the LED indicator on the unit, and by

the sounding of the buzzer.

Order Setting items Setting range Default value

1 Setting door station address 0~3 0

2Setting door station

calling mode Standard/Group calling mode Standard calling mode

3 Setting camera N/P standard N/P standard P standard

4 Setting prompt voice Max. 9 voices Voice 1

5 Setting prompt voice volume 1~9 6

6 Setting the unlock mode 0:opened/1:closed 0:opened

7 Setting the unlock time 01 to 99 seconds 1 seconds

8Setting the nameplate

illumination mode On/Off/Auto On

9Setting night view LED

illumination mode On/Off/Auto Auto

10 Setting ring-back tone

Ringing one time

Ring continuously

No ring-back tone

Ringing one time

11 Setting image display mode

Alternate switching mode

Zoom mode

Full screen mode

Alternate switching mode

12 RAINY_COVER congure Provide / not Provide

-7-

Setting Door Station Address

Setting Door Station Calling Mode

Total 4 addresses can be congured. It can be modied either before or after installation.

0 is default, to change the setting, please follow the steps:

UNLOCK Indicator:OFF

TALK Indicator:OFF Buzzer Beep+, Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep+

In standby mode, press

KEY_SET button once

Press KEY_1 button to set

the first door station.

Press KEY_2 button to set

the second door station.

Press KEY_3 button to set

the third door station.

Press KEY_4 button to set

the fourth door station.

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep,Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep,Beep,Beep

ID=0,1st door station ID=1,2nd door station ID=2,3rd door station ID=3,4th door station

SETUP INSTRUCTIONS

• If setting mode has not been exited, you can change the address of door station by pressing KEY1~4

freely.

• The LED_NAME indicator will always blink until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• In this step,press KEY_SET button four times to exit out the setting mode manually.

There are two calling modes for door station.

As apartment system door station, the calling mode is Standard calling mode.

As villa system door station, the calling mode is Group calling mode.

Please know that the door station work in Standard calling mode by default.

-8-

• If setting mode has not been exited, you can change the calling mode by pressing KEY1 circularly.

• The LED_NAME indicator will blink all the time until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• In this step,press KEY_SET button three times to exit out the setting mode manually.

SETUP INSTRUCTIONS

* More details about code setting for monitor, please refer to corresponding user manual .

Each call button will respond different addresses when set in different calling mode. Refer to the

followings for more informations.

Call buttonA: call the monitor with address 01 by default.

Call buttonB: call the monitor with address 02 by default.

Call buttonC: call the monitor with address 03 by default.

Call buttonD: call the monitor with address 04 by default.

Call buttonE: call the monitor with address 05 by default.

Call buttonF: call the monitor with address 06 by default.

Call buttonG: call the monitor with address 07 by default.

Call buttonH: call the monitor with address 08 by default.

Call buttonA: Call all monitors in group address from

00~15.(one of the monitor should be set to 00)

Call buttonB,C,D,E,F,G,H: Call all monitors in group

address from 16~31. (one of the monitor should be set to

16)

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button twice.

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Beep+

Press KEY_1 button to

activate Standard calling

mode for door station.

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Beep, Beep

Press KEY_1 button again

to activate Group calling

mode for door station.

Press KEY_1

Apartment system

door station

Villa system door station

RF CARD

1.Standard calling mode(Address range 01-08 by

default)

2.Group calling mode

To change this setting, please follow the steps:

-9-

Setting Camera N/P Standard

Setting Prompt Voice

The standard of the camera can be adjusted at any time, that means the quality of image on

screen can be set to differ.

P standard is default, to change the setting, please follow the steps:

Max. 9-languages voice to select, No voice, Voice 1 and Voice 2 ...

Voice 1 is default, to change the setting, please follow the steps:

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button twice.

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Beep+

Press KEY_2 button to set the

camera standard to P

standard.

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Beep, Beep

Press KEY_2 button again

to set the camera standard

to N standard.

Press KEY_2

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button twice.

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Play the voice 1

Press KEY_3 button to set the

prompt voice to Voice 1.

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Play the voice 2

Press KEY_3 button again

to set the prompt voice to

Voice 2.

Beep+

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer

Press KEY_3 button again

and again to set the prompt

voice to No voice.

Press KEY_3

SETUP INSTRUCTIONS

• If setting mode has not been exited, you can change the camera standard by pressing KEY2 circularly.

• The LED_NAME indicator will blink all the time until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• In this step,press KEY_SET button three times to exit out the setting mode manually.

• If setting mode has not been exited, you can change the prompt voice by pressing KEY3 circularly.

• The LED_NAME indicator will blink all the time until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• The voice can be customized.

-10-

SETUP INSTRUCTIONS

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button twice.

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer Play the volume

Press KEY_4 button to set the

volume level.

UNLOCK Indicator:OFF

CALL Indicator:ON

Buzzer

Press KEY_4

Play the volume level 9

Press KEY_4 button again

and again to set the volume

level you want.

Setting Unlock Mode

There are 2 unlock modes, Normally opened and Normally closed.

Normally opened is default, to change the setting, please follow the steps:

UNLOCK Indicator:ON

CALL Indicator:OFF

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button three

times.

UNLOCK Indicator:ON

CALL Indicator:OFF

Buzzer Beep+

Press KEY_1 button to set

the unlock mode to

Normally opened.

UNLOCK Indicator:ON

CALL Indicator:OFF

Buzzer Beep, Beep

Press KEY_1 button again

to set the unlock mode to

Normally closed.

Press KEY_1

• If setting mode has not been exited, you can change the unlock mode by pressing KEY1 circularly.

• The LED_NAME indicator will blink all the time until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• In this step,press KEY_SET button twice to exit out the setting mode manually.

Setting Prompt Voice Volume

• If setting mode has not been exited, you can change the volume level by pressing KEY4 circularly.

• The LED_NAME indicator will blink all the time until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

Total 9 level can be congured. It can be modied either before or after installation.

6 is default, to change the setting, please follow the steps:

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NY Wholesale Système d'interphone

NY Wholesale

NY Wholesale DT-IP-G24 Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur