Nvidia Quadro K6000 Manuel utilisateur

NVIDIA Quadro K6000

Graphics Card

Installation instructions for HPE

WS460c Graphics Expansion Blade

and HPE servers

Overview

This document provides instructions for installing an NVIDIA Quadro

K6000 graphics card into the HPE ProLiant WS460c Gen8 Graphics

Expansion Blade.

For software installation information, see the Microsoft Windows on

ProLiant WS460c Gen8 Workstation Blade with WS460c Graphics

Expansion Blade Administrator Guide.

Kit contents

•

NVIDIA Quadro K6000 graphics card (225W)

•

PCI expansion bracket

•

Double-wide retention bracket

•

Screws

•

This document

Additional requirements

You can add more ProLiant servers for future support. For

requirements specific to each individual server, see the individual

hardware documentation.

Replacing NVIDIA Quadro 5000

and 6000 graphics cards

IMPORTANT: This procedure is for replacing NVIDIA

Quadro 5000 and 6000 graphics cards only on the Gen8

graphics expansion blade. Earlier generations do not

support this card.

Required tools for this procedure:

•

T-10/T-15 Torx screwdriver (provided inside the server)

•

HPE Insight Diagnostics software

To remove the graphics card from the graphics expansion blade:

1. Power down the WS460c Gen8 Expansion Blade.

2. Remove the WS460c Gen8 Expansion Blade.

3. Remove the WS460c Graphics Expansion Blade access panel.

4. Remove the WS460c Graphics Expansion Blade PCIe card

cage.

5. Disconnect any power cables from the graphics card,

disconnect the retaining screws, and then remove the graphics

card from the card cage.

6. Insert the NVIDIA Quadro K6000 graphics card into the card

cage.

7. Install two screws at the I/O connector panel to secure graphics

card to the card cage.

8. Install the card cage to the WS460c Gen8 Expansion Blade.

9. Install power cables to the graphics card power connector

located at the end with cooling fan.

The information contained herein is subject to change without

notice. The

only warranties for Hewlett Packard Enterprise products and services are set

forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional

warranty. Hewlett Pa

ckard Enterprise shall not be liable for technical or

editorial errors or omissions contained herein.

Part Number: 734583-002

November 2015

Edition: 2

10. Install access panel and reinstall the WS460c Gen8 Expansion

Blade to the enclosure.

The installation is complete. For more removal and replacement

information, see the ProLiant WS460c Gen8 Workstation Blade with

WS460c Graphics Expansion Blade Maintenance and Service

Guide.

Installing the graphics card on the

DL/ML/SL Server

Required tools for this procedure:

•

#2 Phillips screwdriver

•

T-10/T-15 Torx screwdriver (provided on back of the server)

Before installing the card, check the hardware and specification

documentation of the server to be installed and confirm that the

NVIDIA Quadro K6000 is supported. For high-level installation

instructions, follow these steps. For more specific installation

information, see the individual server documentation.

1. Use a Phillips screwdriver to remove the standard extender

from the graphics card.

2. Install the short extender on the graphics card. Tighten screws

until snug.

CAUTION: Do not over tighten screws.

3. Power down the server.

4. Follow your server specific hardware documentation to

remove, replace, or install the NVIDIA Quadro K6000 graphics

card.

5. Power up the server.

6. Download and install the latest drivers from the Hewlett

Packard Enterprise or NVIDIA website.

The installation is complete.

Autres manuels Nvidia Carte vidéo

Nvidia

Nvidia EVGA GeForce GTX 1080 FTW Manuel utilisateur

Nvidia

Nvidia C1060 - Tesla Computing Processor Manuel utilisateur

Nvidia

Nvidia Quadro Manuel utilisateur

Nvidia

Nvidia GeForce GTX 400 Manuel utilisateur

Nvidia

Nvidia FX 1500 Instructions d'utilisation

Nvidia

Nvidia GeForce GTX 980 Manuel utilisateur

Nvidia

Nvidia GeForce 2 GTS Manuel utilisateur

Nvidia

Nvidia Quadro FX 3700 Instructions d'utilisation

Nvidia

Nvidia GeForce FX Series Manuel utilisateur

Nvidia

Nvidia GeForce FX 5900 XT Series Manuel utilisateur

Nvidia

Nvidia Quadro FX 4700 X2 Instructions d'utilisation et de sécurité

Nvidia

Nvidia GV-N430-2GI Manuel utilisateur

Nvidia

Nvidia GeForce GTX 650 Ti Manuel utilisateur

Nvidia

Nvidia RTX A6000 Manuel utilisateur

Nvidia

Nvidia geforce gtx 1080 Manuel utilisateur

Nvidia

Nvidia GeForce RTX 3080 Manuel utilisateur

Nvidia

Nvidia FX4500 - Apple MAC Pro QUADRO FX 4500 Video Card... Manuel utilisateur

Nvidia

Nvidia Quadro FX 3700 Manuel utilisateur

Nvidia

Nvidia Video-PX9000 series Manuel utilisateur

Nvidia

Nvidia Quadro 4000 Manuel utilisateur

Nvidia

Nvidia GeForce FX Series Manuel utilisateur

Nvidia

Nvidia GeForce GTX 980 Guide de référence rapide

Nvidia

Nvidia Quadro Manuel utilisateur

Nvidia

Nvidia GEFORCE GT 240 Manuel utilisateur

Manuels Carte vidéo populaires d'autres marques

Gainward

Gainward GeForce GTX 690 4GB Manuel utilisateur

ATI Technologies

ATI Technologies RADEON 137-40225-20 Manuel utilisateur

MSI

MSI N220GT series Manuel utilisateur

ATI Technologies

ATI Technologies RADEON 7000 MAC EDITION Manuel utilisateur

SIIG

SIIG aurora Manuel utilisateur

ClearSpeed

ClearSpeed ClearSpeed Advance e720 Manuel utilisateur

MSI

MSI R7850 series Manuel utilisateur

DVS

DVS Atomix HDMI Manuel utilisateur

Aztech

Aztech VGS3D-AGP Manuel utilisateur

Advoli

Advoli TB4 Standard Manuel utilisateur

ELSA

ELSA ERAZOR III LT Manuel utilisateur

Gigabyte

Gigabyte GV-R7500L Manuel utilisateur

Themis

Themis TGA-7000 PMC Manuel utilisateur

EMS

EMS XtremeRGB-Ex1 Manuel utilisateur

Pioneer

Pioneer PDA-5003 Manuel utilisateur

QDI

QDI N2 Manuel utilisateur

NEC

NEC N8116-48 Manuel utilisateur

MSI

MSI R7770 PoweR Edition Manuel utilisateur