NTI USB2-C5-LC Manuel utilisateur

USB2-C5-LC

USB 2.0 Extender

Installation Manual

These instructions are provided to provide a quick installation of the USB2-C5-LC USB 2.0 Extender. The included

CD contains and application for connecting the Sender to the Receiver after the CAT5 cable has been installed

between them. Drivers for the Sender and Receiver will install automatically once these components are connected.

The drivers support 3 language interfaces: English, simplified Chinese and traditional Chinese. The application will

display the language compatible with the operating system of the computer it is being installed on. It supports

Windows XP 32 bit and 64 bit, Windows Vista 32 bit and 64 bit and Windows 7 32bit and 64 bit. Before installing

applications, the firewall of the antivirus software running in the computer and the firewall that comes with the

operating system should be disabled.

Step 1：Install the Application

Click the install application on the CD and the following interface will appear:

Click “Finish”

Click the “Finish” button and the restart the computer interface appears:

Click the “Finish” button to complete the installation process of the application, and the computer will restart. After

the computer restarts, the icon will appear on the desktop.

Step 2：USB2.0 Extender #2 Driver Installation for Sender

After restarting the computer, connect the Sender to the USB port of the computer

and “Found New Hardware“ will appear in the bottom corner of the screen. Then it will change to “Installing New

Hardware” followed by “New Hardware is Ready to Use”.

If a window appears calling for new hardware installation, follow the prompts to install it.

Step 3: Driver Installation for Receiver

1. Double-click on the “Launch USB 2.0…” icon on the desktop.

2. The round portion will appear in the tray at the bottom right. Notice the red dot. This indicates the Receiver

is not connected.

3. Connect the supplied 5V power supply to the Receiver.

4. Connect the Receiver to the Sender using a CAT5 cable. If the drivers for the Receiver to install automatically,

then you will be prompted to install them. Follow the prompts to install the drivers.

5. Once the drivers are installed, the icon will change to

You are now ready to connect a USB device to the receiver.

Tips for Use

If the CAT5 cable is disconnected, you will see the message “A network cable is unplugged”.

If the extender remains connected and powered ON when the PC is powered ON, the extender will be ready to use

without further action.

If the PC is powered ON without the extender connected, you will need to re-connect it and double-click the “Launch

USB2.0….” icon to start the application.

Man227 8/19/14

Table des matières

Autres manuels NTI Extenseur

NTI

NTI XTENDEX ST-C6USBDP4K-328 Manuel utilisateur

NTI

NTI Vopex-C6DVIA-4 Manuel utilisateur

NTI

NTI XTENDEX Series Manuel utilisateur

NTI

NTI XTENDEX ST-C6HD-HDBT-LC Manuel utilisateur

NTI

NTI Xtendex ST-C5USBVT Manuel utilisateur

NTI

NTI XTENDEX ST-C6DVI-300 Manuel utilisateur

NTI

NTI ENVIROMUX Series Manuel utilisateur

NTI

NTI VOPEX-C5V-x Manuel utilisateur

NTI

NTI XTENDEX Series Manuel utilisateur

NTI

NTI USB2-C5-LCND492 Manuel utilisateur

NTI

NTI ST-FOUSB4K-LC Manuel utilisateur

NTI

NTI XTENDEX ST-C5USBV Manuel utilisateur

NTI

NTI ST-C6HD-150-LC Manuel utilisateur

NTI

NTI XTENDEX Series Manuel utilisateur

NTI

NTI XTENDEX ST-FO4K18GB-RSLA-LCV2 Manuel utilisateur

NTI

NTI XTENDEX Series Manuel utilisateur

NTI

NTI ST-C6USBH-300 Manuel utilisateur

NTI

NTI ST-IPUSB4K-L-VW Manuel utilisateur

NTI

NTI ST-IPUSBD-L-DH Manuel utilisateur

NTI

NTI XTENDEX ST-C5KVM2ARS-1000S Manuel utilisateur

NTI

NTI Xtendex ST-C5KVM-300 Manuel utilisateur

NTI

NTI ST-C5HDA-600 Manuel utilisateur

NTI

NTI XTENDEX Series Manuel utilisateur

NTI

NTI XTENDEX Series Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur