NRS Relief HuggyPRO 72 Manuel utilisateur
For more info,
visit our website: www.nrsrelief.com
Tent assembly Manual Multi-purpose tent
HuggyPRO 72 m²
Packing list
Shade Net cover
1x Shade cover
a
1 x Manual
d
6x Bullhorn
b
3x Cables with pre-tted T pipes
c
HuggyPRO 74 m²
For more info,
visit our website: www.nrsrelief.com
Place bull horn ttings on the three gable
end joints.
Note: ensure that they are inserted
through the Velcro loop, and that the pin
is inserted through the hole in the roof
joint.
8Velcro loop
Pin
Start with assembly of tent,
point 1 to 8
(HuggyPRO 72 tent Manual)
Secure the roof extention panel to the bull
horns with the Velcro ap
9
Secure the cus around the bull horn
ttings with Velcro
10
Connect the steel wires between each
'bull horn' and turn the tension buckle until
the wire is taut
11
Pull the shade cover over the steel wire
cable
12
Hook the shade cover to the rings on the
'bull horns' and tighten the straps
13
Continue with point 12
(HuggyPRO 72 tent Manual)
Instructions
Autres manuels NRS Relief Tente
