Camden User Guide V7
Copyright 2013 novero. All rights reserved.
_
__
_ After pairing is su essful, the headset and the mobile phone will remember
ea h other, and there will be no need to re-pair next time.
_
__
_ Every time the headset is turned on, it will automati ally onne t to the last
onne ted devi e. If you want to pair it with other devi es, please turn off the
Bluetooth fun tion of your last onne ted devi es first and pair the headset
with the new devi e a ording to steps 1 to 6 mentioned above.
Multipoint
Multipoint Multipoint
Multipoint –
––
–
pairing with 2 HFP devi es
pairing with 2 HFP devi espairing with 2 HFP devi es
pairing with 2 HFP devi es
The headset an be onne ted with two a tive Bluetooth devi es simultaneously. If you
want to use multi-pairing, please refer to the following steps:
1. Firstly, pair the headset with your first devi e.
2. Make sure the headset has been onne ted to the first phone. By pressing ( 3
se onds) “Volume –“ you will re-enter the pairing mode again. When the blue and
the red LED blinks alternately you an pair the se ond devi e. Now your se ond
devi e is onne ted and your first phone is just paired. Then you an re- onne t the
first devi e again from your phone. When the headset is powered on the next time it
will onne t to both devi es automati ally.
Note
NoteNote
Note _
__
_ After su essful multi-pairing, the paired devi es will remember ea h other.
Unless the pairing information is deleted be ause of new pairings, there is no
need to pair next time. If the pairing information is deleted, please re-do all
steps again.
_
__
_ Voi e dial and re-dial will always work with the last used devi e
last used devi elast used devi e
last used devi e. While having
a phone all the se ond devi e is dis onne ted. It will automati ally re-pair
after the all again.
_
__
_ Please don’t stream musi or take phone alls while pairing the se ond devi e
as this will ause interferen e sounds. First pair all devi es you like to use –
then start streaming.
Multi
MultiMulti
Multi-
--
- all s enario
all s enarioall s enario
all s enario
When the first phone (main phone) is in an a tive all and another all omes in
from the se ond phone whi h is also onne ted with the Bluetooth headset, press
volume+ about 3 se onds, you will take the all from the se ond phone and hold on
the main devi e all. Press “volume +” for 3 se onds and you will toggle ba k to the
other all. Short press on the multifun tion key will end the a tive all, and then it
swit hes to the held all. Another short press on the MFB will end the all.
