NovaStar J6 Manuel utilisateur

J6 User Manual

User Manual

Multi-Screen Splicing Processor J6

Rev1.0.1

NS160110162

Xi’an NovaStar Tech Co., Ltd.

Statement

Dear users,

You are welcome to use the J6, a multi-screen splicing processor of Xi'an NovaStar

Tech Co., Ltd. (hereinafter referred to as NovaStar).

This document is intended to help you understand and use the product. For accuracy

and reliability, NovaStar may make improvements and/or changes to this document at

any time and without notice.Any problem in use or any good suggestion, please

problems and adopt the suggestions after evaluation as soon as possible.

transmitted in any form or by any means without the prior written consent of Xi’an

NovaStar Tech Co., Ltd.

Trademarks

is a trademark of NovaStar.

Xi’an NovaStar Tech Co., Ltd.

Contents

1 Overview........................................................................................................................... 2

1.1 System Architecture....................................................................................................................................... 2

1.2 Software Installation ...................................................................................................................................... 2

2 Appearance...................................................................................................................... 3

2.1 Front Panel .................................................................................................................................................... 3

2.2 Rear Panel..................................................................................................................................................... 4

3 Signal Connection........................................................................................................... 6

4 Menu Operations ............................................................................................................. 7

4.1 Output Settings.............................................................................................................................................. 9

4.2 Window Settings............................................................................................................................................ 9

4.3 Preset Recall ............................................................................................................................................... 10

4.4 Input Settings............................................................................................................................................... 10

4.5 Display Control .............................................................................................................................................11

4.6 Advanced Settings........................................................................................................................................11

4.7 Communication Settings.............................................................................................................................. 12

4.8 Language Settings....................................................................................................................................... 12

5 System Mode ..................................................................................................................13

5.1 Switcher....................................................................................................................................................... 13

5.2 Splicer.......................................................................................................................................................... 15

6 Electrical Parameters.....................................................................................................17

7 Installation Dimensions .................................................................................................19

8 Troubleshooting .............................................................................................................20

Xi’an NovaStar Tech Co., Ltd.

www.novastar.tech 1

Safety Notice

To avoid potential hazards, please use this product according to regulations. In the

event of breakdowns, non-professionals are not allowed to disassemble it for

maintenance without permission. Please contact the after-sales department of

NovaStar timely.

High voltage danger: The operating voltage range of this product is 100V to 240V AC.

Grounding: This product is grounded through the grounding cord of power supply. Please

keep the grounding conductor well grounded.

Electromagnetic interference: Keep this product far away from magnets, motors and

transformers.

Moisture proof: Keep this product in a dry and clean environment. In case of liquid

immersion, please pull the power plug out immediately.

Keep the product away from flammable and explosive hazardous substances.

Prevent liquids or metal fragments from dropping into the product in order to avoid safety

accidents.

Change History

Date

Version

Description

Remarks

2017-04-18

V1.0.0

First release

Glossary of Terms

Preview: Preview includes input preview and preview in switcher mode.

OSD: On Screen Display. Preloaded images or texts can be overlapped and displayed

on the any area of the screen.

Genlock: Synchronization lock, enabling one system or multiple systems in sync with

the same video source.

Vertical synchronization: The accuracy level of synchronization.

Cascade: Connect multiple J6 units in specific order so as to output images with larger

resolution.

Note: Terms explained here are only for the chapters below. We will be sorry if these

terms cannot help you.

Xi’an NovaStar Tech Co., Ltd.

www.novastar.tech 2

1 Overview

Developed by NovaStar, J6 is a high-performance multi-screen splicing processor

featuring powerful image processing. Multiple video inputs can be overlapped and

displayed on a display system composed by 4 screens after each of the input is scaled.

J6 supports a wide range of inputs which can be spliced into a bigger picture.

Based on a powerful FPGAprocessing platform, J6 supports quick seamless switch

between input sources and supports transition effects such as fade, etc., allow you to

experience more flexible screen layouts.

In addition, J6 can work with V-Can, a new smart management software, to enable

more screen splicing effects and better satisfy your needs.

1.1 System Architecture

1.2 Software Installation

Just like the installation of other common software, install V-Can following the setup

wizard.

In case of antivirus or firewall popups during installation, please

permit them because serial driver may need to be installed during

program installation.

视频源输入 J6 控制器显示屏

Xi’an NovaStar Tech Co., Ltd.

www.novastar.tech 3

2 Appearance

2.1 Front Panel

①

Power switch

ON/OFF

②

Window buttons

WIN1-WIN6, press a button to enter the relevant menu of window properties

for quick settings.

A window is opened when its button indicator is on.

A window is closed when its button indicator is off.

Hold down the window button to close the window on the home screen.

③

Input source buttons

Status of signal sources

A signal source is accessed but not in use when the signal indicator is on.

A signal source is accessed and in use when the signal indicator becomes

brighter.

A signal is not accessed when the signal indicator is off.

④

LCD panel

Used for displaying current status and menus of the processor.

⑤

Knob

Rotate the knob to select menus or adjust parameters

Press the knob to enter main menu or confirm current selection.

⑥

ESC button

Exit from current operation or option.

⑦

Navigation button

Hold down the button to enter the quick navigation screen and quickly learn

how to use J6.

Xi’an NovaStar Tech Co., Ltd.

www.novastar.tech 4

⑧

Function buttons

PRESET: Press the button to enter the “Preset Recall”menu. 16 presets

are available for users to use, save, delete, etc.

TEST: Hold down the button to enter the test pattern settings menu.

OSD: Switch for loading images or texts. Prestored images or texts can be

overlapped and displayed.

Fn (TAKE):A user-definable function button

−Fn (TAKE) button can be set as “Screen Settings”, “Window Settings”,

“Black Out” or “Freeze” when the “System Mode” is set to “Splicer”.

−Fn (TAKE) button can be set as “Take” or “Switch”when the “System

Mode” is set to “Switcher”.

Tip:

Additional description for PRESET: Users can rename the presets through the control

software V-Can.

2.2 Rear Panel

Inputs

Input-A

Can be changed to interface of HDMI1.4, DP1.1 or DualLink DVI as

required.

Input-B

SDI

SDI Loop, SDI loop output

Input-C

Can be changed to DVI/HDMI/VGA depending on the requirements of users

to allow input of different video sources.

Input-D

DVI1

Input-E

DVI2

Input-F

DVI3

Input-G

DVI4

Input-H

SDI

SDI Loop, SDI loop output

Outputs

Xi’an NovaStar Tech Co., Ltd.

www.novastar.tech 5

HDMI preview

HDMI output, capable of previewing the PVW, PGM and 8 input sources.

DVI1-DL/PGM1

DVI1 output

This interface works as PGM1 output when system mode is switcher, and as

DualLink out1 when output mode is set to DualLink.

DVI2/PGM2

DVI2 output

This interface works as PGM2 output when system mode is switcher, and is

invalid when output mode is set to DualLink.

DVI3-DL/PVW1

DVI3 output

This interface works as PVW1 output when system mode is switcher, and as

DualLink out2 when output mode is set to DualLink.

DVI4/PVW2

DVI4 output

This interface works as PVW2 output when system mode is switcher, and is

invalid when output mode is set to DualLink.

Control

ETHERNET (RJ45)

Control interface

USB (Type-B)

USB control interface for connecting upper computer

USB (Type-A)

For cascading multiple J6 units

Genlock IN-Loop

For connecting synchronous signals and for synchronous cascade of J6

units.

Power

AC 100-240V, 50/60HZ

AC power interface

Xi’an NovaStar Tech Co., Ltd.

www.novastar.tech 6

3 Signal Connection

Please refer to the interface introduction in previous chapter to connect hardware

devices (Please turn the power off before connecting signals).

J6-Splicer

Computer Camera

Power Input

Genlock Source

Computer Computer

Camera

LED Display

J6-Switcher

Computer

Camera

Power Input

Genlock

Source

Computer Computer

Camera

Monitor

LED Display

Monitor

Xi’an NovaStar Tech Co., Ltd.

www.novastar.tech 7

4 Menu Operations

After startup, the home screen on the LCD panel is shown as below:

/ /

Pure color: The signal source is in use and signals are available.

Semitransparent: The signal source is not in use and signals are

available.

Transparent: The signal source is not in use and no signal is available.

Transparent: The window has input signal and the type of the signal

source is displayed in the window.

Semitransparent: The window has no input signal. The window will

display the input source used to open a window last time, or the default

input source. When opening a window using the window template, the

window will use the source of the INPUT-C connector as the default

source.

Current preset is displayed. Pure color indicates the preset is turned on

and semitransparent indicates the preset is not turned on.

Xi’an NovaStar Tech Co., Ltd.

Autres manuels pour J6

Table des matières

Autres manuels NovaStar Convertisseur de média

NovaStar

NovaStar J6 Manuel utilisateur

NovaStar

NovaStar Thunderview V1 Manuel utilisateur

NovaStar

NovaStar H Series Manuel utilisateur

NovaStar

NovaStar VX4S Manuel utilisateur

NovaStar

NovaStar HDR Master 4K Manuel utilisateur

NovaStar

NovaStar CVT10 Manuel utilisateur

NovaStar

NovaStar N9 Manuel utilisateur

NovaStar

NovaStar HDR Master 4K Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur