Notifier IFS-2600 Manuel technique

ECN11

1. Product Overview

IFS-2600 Termination Board (TB) is the main termination board, where connections from all other devices in the

panel and thefield are terminated. The Power Supply Interface board (PSI) is mounted directly on top of the spacers

provided in the Termination Board which is available as a separate kit (#ASY-02-021). Both these boards are

mounted on a metal work chassis, which in turn is assembled in the IFS-2600 base panel. A power supply unit (PSU)

is mountedto the chassis, which powers the panel.

Figure 1, IFS-2600 Chassis

This is the IFS-2600 CHS chassis (#MW-02-012) onto which Termination board (#PCA-01-048) will be

assembled.

2. Installation

WARNING:

Installation should be performed by competent persons in accordance with the

relevant standards as required for the installation. Honeywell Ltd accepts absolutely no liability

for the suitability, settings or connections done within an installation.

1. Attach the male end of four M3x20 M/F tapped spacers (#11164) to the four slots provided on termination

board and secure it using four M3 flanged nuts (#10313) as shown in Figure 2.

Figure 2, IFS-2600 Termination Board (NI-2025-01 PCB)

9 Columbia Way

Baulkham Hills, NSW 2153

PH 02-9894-1444 • FAX 02-9894-4193

www.notifier.com.au

Notifier IFS-2600 Termination Board (TB)

Product Installation Document

DOC

037

ECN11

/2011

Rev:

1.0

IFS-2600 Chassis

(#MW-02-012)

Studs to secure

Termination

Board

M3 Flanged Nuts (#10313)

to Male end of

Spacer (#11164)

ECN11

2. Attach the Termination board (#PCA-01-048) to the four Studs on the IFS-2600 chassis and secure it using

four Philips head sems screws (#2316) as shown in figure 3.

Figure 3, Termination Board Secured to IFS-2600 Chassis

3. Place the Power Supply Interface (PSI) board (#PCA-01-045) on the spacers (provided on the termination

board) and secure it using four Philips head sems screws (#2316) as shown in figure 4.

Note: This assembly is termed as Top Hat Assembly, which will be secured to the Base panel.

Figure 4, PSI Board attached to Termination Board

4. If the IFS-2600 Top Hat Assembly was removed from the panel, re-attach it to the top location of IFS-2600

Base panel and secure it using four M4 flanged nuts (GEN-01-008) as shown in figure 5.

Figure 5, IFS-2600 TB on Chassis installed in Base Panel

ECN11

Figure 6, Termination Board, PSI & PSU Connection Diagram

3. Components

The IFS-2600 TB kit assembly contains the following components, as outlined in Table 1.

Part No. Description Qty

2316 M3 x 8 Philips Head Sems Screws 8

10313 M3 Flanged Nuts 4

11164 M3 x 20 M/F Hexagonal Tapped Spacer 4

11877 Cable - 4 way Power PSI for IFS-2600 – 150mm (DWG0058) 1

11878 PSI-FIM Ribbon Cable10 Way – 150mm (DWG0059) 1

CA-01-005 24V Cable – PSI to PSU – 4 Way, Red+Black 550mm (DWG0304) 1

PCA-01-048 Termination Board to Suit IFS-2600, NI-2025-01 PCB 1

Table 1: Components

4. Supplemental Documentation

For

information

on... Refer to... Part No.

IFS-2600 TB IFS-2600 Installation, Programming & Operations Manual DOC-01-009

Table 2: Supplemental Documentation

Autres manuels pour IFS-2600

Table des matières

Autres manuels Notifier Alarme incendie

Notifier

Notifier UZC-256 Manuel utilisateur

Notifier

Notifier LCD-80F Manuel utilisateur

Notifier

Notifier ACS Series Manuel utilisateur

Notifier

Notifier AVL-1 Fiche technique

Notifier

Notifier NAM-232 Manuel utilisateur

Notifier

Notifier IFS-2600 Mode d’emploi

Notifier

Notifier 002-439 Mode d’emploi

Notifier

Notifier UniNet 2000 Simplex 4010 NION Manuel utilisateur

Notifier

Notifier VGM NION UniNet 2000 Manuel utilisateur

Notifier

Notifier NBG-12LO Manuel utilisateur

Notifier

Notifier NFS-3030/E Manuel du propriétaire

Notifier

Notifier ID50 SERIES Manuel utilisateur

Notifier

Notifier ID50 SERIES Feuille d'instructions

Notifier

Notifier NFS-640 Manuel utilisateur

Notifier

Notifier INERTIA-2464/64 Manuel utilisateur

Notifier

Notifier AM2020 Manuel utilisateur

Notifier

Notifier AM2020 Manuel utilisateur

Notifier

Notifier AFC-600 Manuel utilisateur

Notifier

Notifier ONYX Series Manuel utilisateur

Notifier

Notifier FS-WST Mode d’emploi

Notifier

Notifier NBG-12LOB Manuel utilisateur

Notifier

Notifier RP-1001 Manuel utilisateur

Notifier

Notifier AFP-100 Manuel utilisateur

Notifier

Notifier UniNet 2000 AFP-300 NION Manuel utilisateur

Manuels Alarme incendie populaires d'autres marques

Zeta Alarm Systems

Zeta Alarm Systems INFINITY ID2 Manuel utilisateur

System Sensor

System Sensor 22051TLE-RF-26 Manuel utilisateur

Pittway

Pittway Notifier AM2020 Manuel utilisateur

Ampac

Ampac ZoneSense Manuel utilisateur

Kidde

Kidde VM-1 Manuel du produit

LST

LST SIM016-3 Manuel utilisateur

Fireboy- Xintex

Fireboy- Xintex FBD-MZ Instructions originales

bolid

bolid S2000-IP-03 Manuel utilisateur

GST

GST DI-9204 Manuel utilisateur

E2S

E2S BExTBG05D Manuel utilisateur

Fire-Lite Alarms

Fire-Lite Alarms MS-2 Manuel utilisateur

Siemens

Siemens FDOOT221 Manuel utilisateur

hyfire

hyfire HY5000 Series Manuel utilisateur

FlameStop

FlameStop PFSIFP8 Manuel utilisateur

Radionics

Radionics Radionics 9124 Manuel utilisateur

UniPOS

UniPOS FD 7120 Manuel utilisateur

FIREWOLF

FIREWOLF FW-C01224 Manuel utilisateur

Siemens

Siemens MH-5 Series Manuel de service