3 Menu Operaon
Figure 3-1 Main Menu
DAY&NIGHT
BACKLIGHT
INDOOR
OUTDOOR
INDOOR1
LOW-
LIGHT
MANUAL SHUTTER
AGC
SENS-UP
BRIGHTNESS
D-WDR
DEFOG
BLC
HSBLC
ATW
AWC-SET
MANUAL
COLOR
B/W
EXT
2D NR
3D NR
CAM
TITLE
D-EFFECT
MOTION
PRIVACY
LAUGUAGE
DEFECT
VERSION
SHARPNESS
MONITOR
LSC
VIDEO.
OUT SETUP
SMART
FOCUS
You can call the menu and adjust the camera
parameters with a coaxial camera controller
(purchase separately). You can also call the menu
with supported TVI DVR.
3.1 VI DEO.OUT
PAL or NTS C is selectable .
3.2LANGUAGE
English, Japanese,CHN1, CHN2, Korean, German,
French, Italian, Spanish, Polish, etc., are selectable.
3.3 SETUP
3.3.2 SCENE
You can select indoor, outdoor, indoor 1 and low
-light as the working environments.
3.3.3LENS
The camera is equipped with 2.8-12mm motorized
vari-focal lens.
3.3.4EXPOSURE
EXPOSURE
1. SHUTTER AUTO
2. AGC OFF
3. SENS-UP ---
4. BRIGHTNESS---|------ 40
5. DEFOG OFF
6. D-WDR OFF
7. RETURN RET
Figure 3-2 Exposure
SHUTTER: AUTO,1/25, 1/50, F LK, 1/200, 1/400,
1/1k, 1/2k, 1/5k, 1/10k, 1/50k, x2, x4, x6, x8, x10,
and x15 are selectable.
: You can set the AG C value from 0 to 15.AGC
: You can set the S ENS-UP to OFF or AUTO.SENS-UP
: You can set the brightness valueBRIGHTNESS
from 1 to 100.
: You can set the defog funcon as O N toDEFOG
enable the funcon. Posion, size, and the defog
gradaon are configurable.
You can set the D-WDR as ON or O FF.D-WDR:
3.3.5 Backlight
Backlight Compensaon (BLC):
Set the gain of BLC as High, Middle, or Low.-GAIN:
Press the up/down/le/right buon to-AREA:
define the B LC posion and size. SelectRET or
AGAIN to go back the BLC menu or re-define the
BLC area.
Restore the BLC sengs to the default.-Default:
HSBLC: Select an HS B LC area. Set theDISPLAY
status as ON. Press the up/down/le/right buon
to define the area posion and size. Set the H SBLC
LEVEL from 0 to 100. Select ALL DAY or Night for the
HS BLC mode. Set theBLACK M ASK status as O N or
OFF.
HSBLC
1. SELECT AREA 1
2. DISPLAY ON
3. LEVEL ---|------ 40
4. MODEALLDAY
5. BLACK MASK ON
6. DEFAULT
7. RETURNRET
Figure 3-3 H SBLC
3.3.6 White Balance (W B)
MANUAL , ATW (Auto-tracking White Balance),
AWC→SET are selectable.
3.3.7 Day & Night
Color, B/W, andEXT are selectable for DAY and
NIGHT switches.
3.3.8 NR
: You can set 2D NR status as ON or O FF.2D NR
: Set the Smart N R status as ON and adjust3D NR
the 3D smart N R sensivity ranges from 0 to 100.
Set the 3D NR LEVEL ranges from 0 to 100. Set the
2D&3D NR
1. 2DNR OFF
2. 3DNR ON
3. RETURN RET
3D NR
1. SMART NR ON
2. LEVEL ------|--8 0
3. START. AGC -|--------10
4. END. AGC -|--------10
5. RETURN RET
Figure 3-4 N R
Figure 3-5 3D NR
3.3.9 SP EC IAL
Edit the camera tle on this secon.Camera Title:
D-effect:
Set the freeze funcon as O N or OFF.-FREEZE:
OFF, MIRRO R, V-FLIP, and ROTATE are-MIR ROR:
selectable for mirror.
Define the zoom area by configuring-D-ZOOM:
the posion from PAN&TILT.
The D-Zoom area, sensivity-SMART D-ZOOM:
and me are configurable.
Set the N EG IMAGE as ON or OFF.-NEG.IM AGE:
SPECIAL
1. CAM TITLE ON
2. D-DFFECT
3. MOTION OFF
4. PRIVACY OFF
5. DEFECT
6. RETURN RET
Figure 3-6 Special
MOTION
1. SELECT AREA 1
2. DISPLAY ON
3. SENSITIVITY ----|---- 30
4. MOTION VIEW ON
5. DEFAULT
6. RETURN RET
Figure 3-7 Moon Detecon
Moon: Select a MOTION area. Set theDISPLAY
status as ON or O FF. Press the up/down/le/right
buon to define the posion and size of the area.
Set the S ENSITIVITY from 0 to 60. Set the MOTION
VIEW status as ON or OFF.
Privacy: Select a PRIVACY area. Set theDISPLAY
status as INV, MOSAIC, CO LO R or OFF. Press the
up/down/le/right buon to define the posion
and size of the area.
Defect:LIVEDPC, STATICDPCand BlackDPC are
adjustable in this secon.
PRIVACY
1. SELECT AREA 1
2. DISPLAY MOSAIC
3. COLOR 10
4. TRANS. 1
5. DEFAULT
6. RETURNRET
ADJUST
1. SHARPNESS --------|15
2. MONITOR LCD
3. LSC OFF
4. RETURNRET
3.3.10 ADJUST
: Adjust the sharpness from 0 to 15.Sharpness
: Monitor CRT, and Monitor LC D areMonitor
selectable.
: Set the L SC status as O N or OFF.LSC
3.3.11 RESET
Reset all the sengs to the default.
3.3.12EXIT
Press O K to exit the menu.
STA RT. AG C level as the threshold to enable A GC,
and set the E ND. AG C level as the threshold to
disable AGC.
Figure 3-8 Privacy MaskFigure 3-9 Adjust
3.3.1 SMART FOCU S
Move the joysck to adjust the camera lens by the
FOCUS+, FOCUS-, ZOOM+ and ZOOM-. The smart
focus value turns higher when the focusing
effecveness turns beer. The value range is 0~99.
Steps:
1.Drill the screw holes and the cable hole in the
ceiling according to the supplied drill template.
2.Screw the bolts through the mount by aligning
with the 2 bolt holes. Fit the toggles onto the bolts.
3.Push the two toggle bolts through the two screw
holes on the ceiling. Rotate the bolt ll the toggle
holds the ceiling ghtly.
2.2 In-ceiling Mounng
Figure 2-5 Install the Mount
4.Route and connect the corresponding cables.
5.Fix the camera to the in-ceiling mount with the
supplied screws.
Figure 2-3 Fix the Camera to the Ceiling
6. Connect the corresponding cables.
7. Adjust the camera according to the figure below
to get an opmum angle.
8. Fit the black liner on the camera and ghten the
screws on the bubble of type 1 camera or rotate the
bubble of type 2 camera to complete.
Figure 2-4 3-axis Adjustment
You need to purchase an in-ceiling mount separately
if you adopt in-celling mounng.
P Direction
R Direction
T Direction
5.Align the camera with the back box/base plate,
and ghten the set screws to secure the camera
with the back box/base plate.
Figure 2-6 Fix the Camera to the Mount
Figure 2-8 Fix the Camera to the Gang Box
6. Repeat steps 6-8 of the Ceiling Mounng secon
to complete the installaon.
2.3 In-ceiling Mounng with
Gang Box
Only the type 1 camera supports in-ceiling
mounng with gang box.
1.Repeat steps 2-4 of the In-ceiling Mounng
secon to secure the in-ceiling mount (supplied)
to the gang box.
Figure 2-7 Install the Mount
2.Route and connect the corresponding cables.
3.Align the camera with the gang box, and ghten
the screws to secure the camera with the gang box..
4. Repeat steps 6-8 of the Ceiling Mounng secon
to complete the installaon.
0° ~75°
0° ~355°
0° ~355°
