
CLEANING
* Wash the parts with
liquid soap and
lukewarm water.
Use the brush to
clean the nose tip.
* You can soak the
parts in a disinfection
liquid, just make sure
the liquid is safe to
use for baby
equipment.
Detach the Penguin head in the following order:
* Let the parts
dry completely
before the next use.
* It is not allowed to use a dishwasher,
boiling water, microwave oven,
vaporizer or baby bottle sterilizer for
cleaning the spare parts because
they might deform by heat!
* The air mesh is there to prevent solid
objects and dust from entering the
housing.
* The air mesh is not there to absorb
any mucus or liquid.
* If the air mesh is dirty or clogged,
replace it.
* It can function well for a very long time
next to the proper usage of the device.
* Clean the housing with a dry, soft cloth.
* Do not use any liquids, detergents or
chemicals.
* Keep the device in a place where it is
protected from dust, direct sunlight
and heat.
HINTS & TIPS
* Dry, very thick mucus can be dissolved
by a mild saline solution. After using it,
wait a few minutes, wipe excess discharge
with a tissue, then reuse the nasal aspirator
as directed.
* Do not use more than 5 ml of saline
solution at once.
* Do not cover the vents on the back of
the device while in use.
* The Penguin head must be assembled
and disassembled in the right order.
* The device should only be used
by adults.
* Do not allow children to play
with the device, it is NOT A TOY.