8
C. C13xx/C20xx Concrete Saw Specifications
Dimensions/Weight C1316SS
C1320SS
C1316SM
C1320SM
C2016SS
C2020SS
C2024SS
Length (Transport) 56 inch (1142 mm) 56 inch (1142 mm) 56 inch (1142 mm)
Width 26 inch (660 mm) 26 inch (600 mm) 26 inch (600 mm)
Height 40 inch (1016 mm) 40 inch (1016 mm) 40 inch (1016 mm)
Weights 385 lbs (175 kg) 405 lbs (175 kg) 428 lbs (195 kg)
Engine
Engine Mfg. Honda Honda Honda
Model GX390 GX390 GX630
Spec No. GX390K1QXC9 GX390UT1QAE2 GX630TXF2
Engine Type Single Cylinder
4 Cycle
Single Cylinder
4 Cycle
Two Cylinders
4 Cycle
Horse Power Net (SAE J1349)* 13 hp (9.5kW)
@ 3,600 rpm
13 hp (9.5kW)
@ 3,600 rpm
20.8 hp (15.5kW)
@ 3,600 rpm
Max Torque Net (SAE J1349)* 19.5 lbs-ft (26.5
Nm, 2.7 kgf-m)
@ 2,500 rpm
19.5 lbs-ft (26.5
Nm, 2.7 kgf-m)
@ 2,500 rpm
35.6 lbs-ft (48.3 Nm,
4.50 kgf-m)
@ 2,500 rpm
Cooling System Air Air Air
Oil Capacity 1.1 liter
(1.16 US qt)
1.1 liter
(1.16 US qt)
2.0 liter
(2.1 US qt)
Fuel Capacity 6.5 liter
(1.79 US gal)
6.5 liter
(1.79 US gal)
8.03 liter
(2.12 us gal)
Fuel Type Unleaded Gasoline
(86 pump octane)
Unleaded Gasoline
(86 pump octane)
Unleaded Gasoline
(86 pump octane)
Low Oil Sensor Yes Yes Yes
Air Filtration Four Stage
Honda Cyclone
Two Stage
Honda
Four Stage
Honda
Start Type Manual Electric Electric
Characteristics
Max Blade 20” (356 mm) 20” (356 mm) 24” (406 mm)
Depth of Cut 24” (406 mm) -NA- -NA- 9-1/2 inch (241 mm)
20” (356 mm)
7-1/2 inch (191 mm) 7-1/2 inch (191 mm) 7-1/2 inch (191 mm)
16” (305 mm) 5.50” (140 mm) 5.50” (140 mm) 5.50” (140 mm)
Arbor Bore 1 inch (25.4 mm)
Blade Shaft Locking Device Machined Into Flats Of Tight Collar
Blade Shaft Speed 16” and 20” Models: 2,520 rpm
24” Models: 2,120 rpm
Depth Control Hand Wheel With Screw Feed
Depth Lock Standard
Number Of V-Belts 4
Blade Guard Type Pivoting All Steel Construction
Right or Left Side Cutting Standard
Lifting Bale Built In
Handle Bars Adjustable
Recessed Rear Wheels Standard
Front Wheel Wheel 5 x 2 x ¾ With Roller Bearing
Rear Wheel Wheel 6 x 2 x ¾ With Roller Bearing
*: The engine net Horsepower and Torque is supplied by Honda Power. The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3,600 rpm (net power) and
at 2,500 rpm (max net torque). Mass production engines may vary from this value. Actual power output for the engine installed in the final
machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions,
maintenance, and other variables.
