Northern Telecom Unity Two-Line Manuel utilisateur
1
Contents
i
Package Contents
4
Features
Diagram
/
7
5
Assembly and installation
8
Line and Handset Cord Connections
/
8
To connect the handset cord
/
9
To connect the line cord
/
10
Power Transformer Connections
/
10
Tone/pulse selection
/
12
Differentiated Ringing Control
/
12
Configuration of Your Two Telephone Lines
/
13
Optional A-Lead Connection
/
14
Directory Card Installation
/
16
Wall Mounting
/
16
Operational problems
/
17
Basic Operation
Manual Dialing
/
19
On-hook Dialing
/
19
Hanging Up
/
19
Using the LINK key
/
20
19
UNITY Two-Line Business Terminal, User Guide
-
Issue 1
2
I
Contents
Last Number Redial
/
20
Attenuated Ringing
/
21
Visual Indicators
/
21
Feature-in-use
/
21
Message waiting
/
21
Factory Default Settings
/
22
Reverting to factory settings
/
22
l
Programmable Features
Tone/Pulse Selection
/
23
Line Hold Selection
/
24
To deactivate automatic hold
/
24
Remote release of hold
/
24
Prime Line Select
/
25
Answering
calls
/
26
Storing Commands
/
27
Storing a required pause
/
27
Storing a required link
/
27
Storing Telephone Numbers
/
28
Using the Shift Key
/
29
Automatic Dialing of Stored Numbers
/
29
Two stroke dialing
/
29
One stroke dialing
/
30
23
UNITY Two-Line Business Terminal, User Guide
-
Issue
1
Contents
I
3
Call Forwarding
/
30
To program call forward
/
30
To activate call forward
/
31
To cancel call forward
/
31
Do-Not-Disturb
/32
Handset Receive Volume Adjustment
/
32
Saved Number Redial
/
33
Selectable Headset Operation
/
34
Warranty
Warranty
/
35
Regulatory Information
/
38
35
Quick Reference Programming Guide 41
UNITY Two-Line Business Terminal, User Guide
-
Issue
1
5
Features
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Two line capability
Prime line selection line 1, line 2, or neither
Eight (8) programmable memory keys for automatic dialing
Shift key that enables each memory keto store two (2) tele-
phone numbers, for a total of 16 stor
ec!
numbers or codes
Visual indicators for ringing, off-hook, call forward, message
waiting for each line, feature-in-use, do-not-disturb, hold and
line in use Program Mode Shift
LINK
[L]
key for hookswitch flash
Line release
[RI
key
Line Hold
Automatic hold for switching between lines
Remote release of hold
Last Number Redial
[Redial]
Saved Number Redial
[S]
Do-Not-Disturb with visual indicators
On-hook dialing
Dedicated call forward key
Hearing aid compatibility
Tone/Pulse selection, tone default
Adjustable ringer volume
6
/
Features
-
-
-
-
-
-
-
-
-
-
-
-
One stroke speed dialing
7
l?oeFditt
volume control,handset
-S
eaker
-
P
a erter
Scratch-resistant matte finish
Wall-mountable with optional wall mount kit
C.O.
/
PBX,
CENTREX
compatible
A-Lead control compatible for operation behind
lA2
Key type systems
Differentiated ringing control
Power failure operation
Adjustable handset and receive volume
Selectable headset option
Memory protection retains programmed phone numbers up
72 hours without AC power
Program key
UNITY Two-Line Business Terminal, User Guide
-
issue 1
Features /7
Programmable Memory Keys (8)
Last Number Redial (Redial)
Link Key (L)
Saved Number Redial (S)
Release Kev
Dial Pad
/
/
Volume Control Rocker Switch
Fig. 1
8
Assembly and Installation
The Unity Two-Line is a Two line electronic telephone designed
and factory wired for use with PBX,
CENTREX
or CENTRAL
OFFICE (CO) switching system. No wiring changes are required.
Follow these simple installation steps and start using your new
Unity telephone set.
Line and
Handset
Cord
CAUTION
Connections
Before installing the Unity Two-Line, ensure that the
RJ14 (two line) wall jack designated for it is properly
wired for this type of telephone. Plugging the Unity
Two-Line into a jack wired for proprietary-type tele-
phones such as the Meridian
SL-1
or Meridian SL-100
terminals may damage your phone.
UNITY Two-Line Business Terminal, User Guide
-
Issue 1
Assembly and Installation
/
9
7’0 Connect the
-
Insert
the plug at one end of the coiled handset cord into the
Handset Cord
handset cord jack on the bottom of your phone. A “click” indi-
cates that it is properly locked in place. See Figure 2.
-
Route the cord through the handset cord channel as shown in
Figure 2. Then connect the plug at the other end of the cord to
the handset. A “click” indicates that it is locked in
place.
Fig. 2
UNITY Two-Line Business Terminal, User Guide
-
Issue 1
10 /Assembly and Installation
To Connect the
Line Cord
Power
Transformer
Connections
-
Insert
the
plug at one end of the line cord into the standard
line cord jack (designated
'J2’)
on the bottom of your phone. A
‘click’ indicates that it is locked into place.
-
Route the line cord through the line cord channel. See Figure 3
Fig. 3
The Unity Two-Line is a powerful telephone with many features
such as automatic dialing and a built-in speaker for call monitor-
ing. Therefore, your telephone is equipped with a transformer for
the power needed to enable these additional features.
To
prevent
accidentally turning off power to your phone, we recommend
using an outlet that is not controlled by a light switch.
Note: Make all cord connections before plugging the power trans-
former into an AC outlet.
Table des matières
Autres manuels Northern Telecom Téléphone
Northern Telecom
Northern Telecom Compact ICS 4.0 Manuel utilisateur
Northern Telecom
Northern Telecom 3X8 Guide de l'utilisateur
Northern Telecom
Northern Telecom Decorator Series Manuel d'instructions
Northern Telecom
Northern Telecom DisplayPhone Manuel utilisateur
Northern Telecom
Northern Telecom Logic 10 Manuel utilisateur
Northern Telecom
Northern Telecom Meridian M3000 Manuel utilisateur
Northern Telecom
Northern Telecom QSK 100 Mode d’emploi
Northern Telecom
Northern Telecom DMS-100 Series Manuel d'utilisation
Northern Telecom
Northern Telecom IMAGINATION QSK450 Instructions d'utilisation et d'installation
Northern Telecom
Northern Telecom M5317TX Manuel utilisateur
