Nordic ID RF651 Manuel utilisateur
Nordic ID
RF651
®
USER MANUAL
Contents
Copyright 1
Disclaimer 1
Trademarks 1
Latest information 2
EU Declaration of Conformity 2
FCC Compliance Statement 2
FCC NOTICE 2
IC Related Information 2
Warranty and Safety Warnings 3
User Safety 5
Medical Equipment Compatibility 5
Care and Cleaning of the RF651 5
1. The System 6
1.1 Bluetooth 6
1.2 System Description 6
1.3 Principles of Operation 7
1.4 Operation of the Handheld Terminal 7
1.5 Security 8
2. RF651 Handheld Terminal 8
2.1 RF651 Main Features 8
2.2 Communication Requirements 9
2.3 Type Plate 9
2.4 Scanner 10
2.5 Laser Safety Label 10
2.6 Keyboard 11
2.7 Connectors 11
3. Using the RF651 12
3.1 First Time Activation 12
3.2 Connecting to the Access Server 12
3.2.1 Searching and Adding the Access Server(s) to the Device List 13
3.3 Using RF651 with the USB Bluetooth Adapter 14
3.4 Preparing the RF651 for connection without a Port Router 14
3.5 Preparing the RF651 for connection with a Port Router 14
3.6 Initial Display 15
3.6.1 Display Symbols 15
3.6.2 Status Messages 15
3.7 Function Keys 16
3.8 Input Fields 16
3.8.1 Filling Fields with the scanner 16
3.8.2 Locked Fields (Buttons) 17
3.8.4 Writing Letters 17
3.8.5 Removing Letters 17
3.8.7 Locking the Keyboard 17
3.9 Installing a demonstration environment 17
Preparing the Charger & RF651 18
Software Installation Procedure 18
4. Built-in Menu 20
4.1 Settings 20
4.1.1 Device List 20
4.1.2 PIN Code 21
4.1.3 Wait Connection 22
4.1.4 Channel 22
4.2 Adjustments 22
4.2.3 Volume 23
4.2.4 Battery Type 24
4.3 Information 24
4.4 Reader Test 24
5. Desktop Charger (DTC05) 24
5.1 General information 25
5.2 Equipment 25
5.3 Connectors 25
5.4 Indicators 25
5.5 Charging the Batteries 26
5.5.2 Audible Signals and the LED Indicator on the Charger 27
6. Application Development 27
7. Warranty, Support & Service 27
7.1 Warranty Coverage 27
7.2 Returning the Unit for Service 28
7.3 Extending the Normal Warranty 28
APPENDIX A - Troubleshooting 29
APPENDIX C - Introduction to the Linear Imager 30
APPENDIX D - Programming the Scan Engine 31
APPENDIX B - Introduction to the Laser Engine 33
© 2006 Nordic ID oy
RF651 User Manual Version 1 June 2006 1
Copyright
All rights to this manual are owned solely by Nordic ID. All rights reserved. Copying this manual without the written
permission from the manufacturer by printing, copying, recording or by any other means or the full or partial translation
of the manual to any other language including all programming languages using any electrical, mechanical, magnetic,
optical, manual or other methods or devices is forbidden.
Nordic ID reserves the right to change the technical specifications or functions of its products or to discontinue
manufacturing of any of its products without any written announcement and urges customers to ensure that the information
at their disposal is valid.
Disclaimer
Nordic ID products have not been designed, intended nor inspected to be used in any life support related applications
nor as a part of any other critical system and are not granted functional warranty if used in any such applications.
Some configurations of the RF651 contain a Class II laser device, which may cause injuries unless safety regulations
and instructions are observed. Nordic ID will not be held responsible for any injuries or damage resulting from use in
contradiction with the safety related instructions stated elsewhere within this manual or which are in contradiction to the
general safety Manual lines relating to Class II laser devices.
Nordic ID urges its customers to arrange proper and adequate user training, which includes safety issues for any personnel
using, programming or otherwise handling RF651 handheld terminals.
The sale, transfer and use of Nordic ID RF651 is subject to the Nordic ID General Conditions of Sale and the Nordic ID
End User License Agreement, in force at the time of purchase.
Trademarks
Nordic ID and the Nordic ID logo are all registered trademarks of Nordic ID Oy.
All terms mentioned in this User Manual that are known to be trademarks or service marks have been appropriately
marked in the list below with either the ©, ® or the ™ symbol. Nordic ID cannot attest to the accuracy of this information.
Use of a term in this User Manual should not be regarded as affecting the validity of any trademark or copyright.
Trademark Company / Owner of the Trademark
Bluetooth Bluetooth SIG (Special Interest Group)
Nordic ID
Nordic ID Oy
Nordic ID RF651
Nordic ID Port Router
Table: Identified trademarks used in this User Manual
Other trademarks are the property of their corresponding owners.
© 2006 Nordic ID oy
RF651 User Manual Version 1 June 2006
2
Latest information
For latest information on the RF651 and on possible changes to this manual please consult our web site at http://www.
nordicid.com.
EU Declaration of Conformity
Nordic ID declares, that the Nordic ID RF651 handheld terminal has been tested according to the standards EN 300 328-
2 and EN 301 489-17. The equipment conforms to the essential requirements of the Directive 1999/5/EC.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC NOTICE
• Use only the power cord and connector cables supplied by Nordic ID to connect the equipment and the power
supply.
• Use only shielded cables to connect I/O devices to this equipment.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
The RF651 complies with FCC requirements. The FCC ID information is printed on the back side of the Handheld Terminal
under the laser caution label.
IC Related Information
This equipment complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
• The RF651 may not cause harmful interference, and
• The RF651 must accept any interference received, including interference that may cause
undesired operation.
© 2006 Nordic ID oy
RF651 User Manual Version 1 June 2006 3
Warranty and Safety Warnings
Please read these warranty and safety related warnings carefully before using the product.
Nordic ID RF651 is a radio device and should not be used in any environments where radio transmitting may cause
any harm. Typical but not limited to are the following types of environments: environments with explosive materials,
gases, demolition sites, hospitals, emergency care rooms, airplanes and areas with highly sensitive measurement
instrumentation.
Users with pacemakers are to be informed about the possible safety hazards posed by radio emitting devices. Placing
any radio emitting device near to a pacemakers is not recommended. Consult the pacemaker documentation for further
safety regulations and requirements set by the manufacturer of the pacemaker.
NOTICE: Persons using pacemakers should be aware that RF emissions from the RF651 may cause unwanted
interference if positioned too close to the pacemaker.
NOTICE: The RF651 has not been designed, intended nor inspected to be used in any life support related device
or system related function nor as a part of any other critical system and is granted no functional warranty if used
in any such applications.
The use of any radio emitting device in explosive environments and especially near explosives may pose serious threats.
Some models of the RF651 models contain a laser barcode reader. Users are advised to follow the general safety
procedures relating to the use of such laser devices.
The Nordic ID RF651 should not be used in critical systems where continuous operation is required and where the possible
loss of data or unwanted changes to data contents are not acceptable, such as in life support related systems.
Warranty will be void, if the product is used in any way which is in contradiction with the instructions given in this User
Manual, or if the housing of the Nordic ID RF651 has been opened or has been tampered.
The devices mentioned in this manual are to be used only according to the instructions described in this manual. Faultless
and safe operation of the devices can be guaranteed only if the transport, storage, operation and handling of the devices
are followed. This also applies to the maintenance of the products.
The RF651 contains no user serviceable parts inside the actual case apart from the batteries, which may be replaced if
required.
NOTICE: Use only AA-type alkaline or rechargeable batteries type: GB Batteries, Models GB 180AAHC, GP210AAHC
and GP230AAHC (GPI International). Do not mix batteries (do not use simultaneously batteries of different
capacity, brand, age or type). Observe correct polarity indicated on the label inside the battery compartment. Do
not attempt to recharge alkaline or other non-rechargeable battery types using the handheld terminal and the
desktop charger or any other charger. When charging batteries inside the terminal, use only Nordic ID charger
type DTC05.
NOTICE: With use of desktop charger use only applicable power supplies: JODEN ELECTRON Co., Ltd, Models:
JOD-4101-031, JOD-41B-029, JOD-41U-14A.
WARNING: The batteries must be discarded according to the local environmental laws and regulations. The
batteries may contain harmful, dangerous or lethal substances, and may cause injury or loss of life if handled
recklessly. Never dispose the batteries in a fire due to a risk of explosion.
Any repair of the Nordic ID RF651 must be done by an authorised service partner of Nordic ID.
© 2006 Nordic ID oy
RF651 User Manual Version 1 June 2006
4
WARNING: The Nordic ID RF651 handheld terminal, desktop charger and power supply contain no user serviceable
parts. Opening the cases will void the warranty and may cause injury. The handheld terminal contains batteries,
which may be changed by opening the battery cover.
Some configurations of the Nordic ID RF651 contain a Class II laser device which may cause eye injury if the beam is
directed straight or via a shining surface to the eye. The laser beam should never be pointed at the eye or eyes of people
or animals. Note that mirrors and reflecting surfaces may cause the beam to deflect in harmful ways. Never look directly
into the laser module when the beam is active.
In Accordance with
EN 60825-1 / A2:2001
(IEC 60825-1 Ed.1.2,2001-08)
650 nm laser
max. 1 mW output
ENGLISH SUOMI
LASER LIGHT VAARA LASERSATEILYÄ
DO NOT STARE INTO BEAM ÄLÄ TUIJOTA SÄTEESEEN
CLASS 2 LASER LUOKKA 2 LASER
DEUTSCH SVENSKA
LASERSTRAHLEN VARNING LASERSTÅLNING
NICHT DIREKTIN DEN LASERSTRAHL STIRRA EJ IN I STRÅLEN
SCHAUEN LASERPRODUKT DER KLASSE 2 KLASS 2 LASER
DANSK ITALIANO
LASERLYF LUCE LASER NON FISSARE
SE IKKE IND I STRÅLEN IL RAGGIO PRODOTTO
KLASSE 2 LASER AL LASER DI CLASSE 2
FRANÇAIS ESPAÑOL
LUMIERE LASER NE PAS LUZ LASER NO MIRE
REGARDER LE RAYON FIXEMENT FIJAMENTE EL HAZ
PRODUIT LASER DE CLASSE 2 PRODUCTO LASER DE LA CLASE 2
NEDERLANDS NORSK
LASERLICHT NIET IN LASERLYS IKKE STIRR
STRAAL STAREN INN I LYSSTRÅLEN
KLASSE-2 LASER LASER, KLASSE 2
PORTUGUÊS
LUZ DE LASER NÃO
FIXAR O RAIO LUMINOSO
PRODUTO LASER DA CLASSE 2
© 2006 Nordic ID oy
RF651 User Manual Version 1 June 2006 5
User Safety
CAUTION: Some configurations of the RF651 barcode scanner contain an integrated class II laser product.
Direct eye contact with the laser beam or with a reflected beam from a shiny surface may cause permanent damage to
the eyes. To avoid risks, please make sure that the following instructions are followed by anyone operating the RF651:
• Hold the Nordic ID RF651 at a slight angle about 10 – 30 cm (few inches) from the barcode label to be read. If the
surface of the barcode label is very reflective, scanning from directly above (90° angle) may cause reading errors.
NOTE: The actual reading distance depends on scanner configuration and/or size of the symbology.
• Push the <SCAN> button on the keypad while directing the beam so that the beam covers all of the bars on the label.
A beep or audio signal will be generated indicating that the scanner has successfully read the label. The scanner will
stay on or it will automatically turn off depending on the scanning options, which have been selected prior to activating
the scan function. During normal operation the beam will be switched off immediately after the barcode has been read
successfully.
Medical Equipment Compatibility
Medical devices, such as pacemakers, hearing aids, etc. are usually manufactured according to the IEC 601-1-2 standard.
This requires that devices must operate properly in an EM (Electromagnetic) field which has strength of 3V/m over a
frequency band from 26 to 1000 MHz. The RF651 Bluetooth radio module is transmitting at a frequency of 2.4 GHz. All
electric appliances may emit spurious RF signals at other than specified frequencies.
WARNING: Persons using pacemakers should be aware of the possible risk of interference from any electronic
device if positioned too close to the pacemaker.
Care and Cleaning of the Nordic ID RF651
The Nordic ID RF651 display window and the scanner window may be cleaned with a clean, non-abrasive, lint-free cloth.
Never use alcohol or detergents, as these may harm the materials of the casing or remove markings.
Table des matières
Autres manuels Nordic ID Lecteur de codes-barres
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
