Nolan HearLinks NSRXRM3C2HL Manuel utilisateur
Wireless
Voice Receiver with
Personal Sound Amplifier
P/N NSRXRM3C2HL
USER GUIDE
HearLinks
.
FCC ID:TNZNSRXRM3C2XXX
0678
Declaration of Conformity. We declare that product
NSRXRM3C2HL conforms to the R&TTE Directive 1999/5/EC.
Getting Started
Remove all components from the package. Items in
the pack included:
Introduction
Thank you for choosing Nolan product. Nolan
HearLinks Wireless Voice Receiver works as a
personal sound amplifier, audio steaming, T-coil
and Bluetooth phone receiver 4 in1; it can improve
hearing impairments to understand more speech
over a distance.
USB charging cableHearLinks earphone
Lanyard Power adapter QSG
USER GUIDE
Please check the contents carefully and contact
your local dealer immediately if anything is missing
or damaged.
Getting to Know Your HearLinks
See image below. Please note some models of
HearLinks will differ slightly in style, colour and the
functionality may vary according to their specifica-
tions.
T
R L
Omni Mic
USB Charging Connector
LED
MFB/On/Off
Toggle ll
Left >
< Right
Earphone Jack
Volume Up
Volume Down
T-coil
Receiver
Wireless /PA
mode Switch
Charging Your HearLinks
Plug the USB charging cable into HearLinks mini
USB connector. Plug the other side of the USB
charging cable into a powered USB connector.
Wear Your HearLinks
When charging, the amber LED will be lighted.
When charging is completed, the amber LED will be
turn off.
Wear with
lanyard to loop
around on neck
for conveniently
using.
Lanyard
hole
Slide the Wireless/PA switch to select the working
mode
Wireless: In this mode, HearLinks works as a
wireless receiver. It connects to Bluetooth mobile
phone/PC or Bluetooth A2DP device such as audio
streamer, remote microphone to answer phone call,
listen music and voice.
Select desired working mode —
Wireless or Personal Amplifier/T-coil
PA modeWireless mode
Personal Amplifier/T-coil: In this mode,
HearLinks works as a personal sound amplifier or
T-coil receiver. It is with internal microphone and
T-coil to captures voice or receives sound and play
out via the earphone.
Select the wireless mode, then press and hold the
MFB button for 2 seconds.
HearLinks will be turn on
and enter pairing mode
with blue and amber LED
fast flashing alternatively.
On other Bluetooth device, search and find the
device named “HearLinks”, and then select
“HearLinks” to pair. In some Bluetooth devices, it will
find the HearLinks and pair/connect with it automati-
cally.
Turn on and pairing HearLinks with your
Bluetooth enabled device
AT&T 10:08 AM
Settings
Bluetooth
HearLinks
Bluetooth
DEVICES
90%
ON
If pin code requested during pairing, please submit
“0000”
When pairing is completed and connecting, the blue
LED will begin to flash slowly.
Turn off HearLinks
Press and hold the On/Off button for 2 seconds.
The amber LED will stay on for 1 second. Then, the
HearLinks will be turn off. Release the MFB button.
Listen music or remote voice:
When select the wireless mode, paired with
Bluetooth A2DP device such as RemHearLinks,
TRX_HD, TX, TxPlus, LiveMIC and BTMIC..etc,
plug the earphone into the HearLinks audio
jack, the audio or voice will be streamed to
HearLinks and listen from earphone wirelessly.
Using HearLinks as wireless receiver
Wireless mode
“Receiver”
audio or voice
“Transmitter”
COAXIAL
AUX OPTICAL
TRX_HD
TX
Transmitter
TxPlus
Transmitter
Plus
LiveMIC
RemHearLinks
BTMIC
M
I
C
R
O
P
H
O
N
E
To reject incoming call or
redial last number, press
and hold the MFB button for
1 second.
Put HearLinks’ microphone
close to the sound source
around 8 inches to captured
the best sound quality.
Answer or end a call:
When paired and connected with Bluetooth mobile
phone, short press MFB button to answer incoming
call or end ongoing call.
max. 20cm
8 inches
Your voice
Caller’s voice
R L
T
Table des matières
Autres manuels Nolan Récepteur
