Nokia HH-12 Manuel utilisateur
Nokia Holder Easy Mount HH-12
& Nokia Mobile Holder CR-96
9206398/2
5
6
7
89
10
ENGLISH
© 2007 Nokia. All rights reserved. Nokia and Nokia Connecting People are
registered trademarks of Nokia Corporation.
Introduction
The Nokia Holder Easy Mount HH-12
is a mounting device that allows you
to attach your compatible Nokia
mobile holder to the windscreen of
your vehicle.
To use the mounting device with your
compatible mobile holder, attach the
mounting device to the windscreen,
adjust the mounting device into the
desired position, and attach your
mobile holder to the mounting device.
Keep all accessories and
enhancements out of the reach of
small children.
General safety instructions
Obey all local laws. Always keep your
hands free to operate the vehicle
while driving. Your first consideration
while driving should be road safety.
Only operate the mounting device or
mobile holder if it is safe to do so
under all driving conditions.
When you install the mounting device
or mobile holder, ensure that they do
not interfere with or hinder the
steering or braking systems or other
systems used in the operation of the
vehicle (for example, airbags) or
disturb your field of vision while
driving.
Check that the deployment of the
airbag is not blocked or impaired in
any way.
ENGLISH
Ensure that the mounting device or
mobile holder is not installed where
you might come in contact with it in
the event of an accident or collision.
Periodically check that the suction cup
at the bottom of the mounting device
is firmly attached to the windscreen,
especially if the ambient temperature
changes a lot.
Never leave the mounting device
inside the vehicle in direct sunlight or
in excessive heat. The mounting
device and suction cup may be
damaged and adhesion may be
impaired if the inside temperature
exceeds +70°C (160°F).
Attach to a windscreen
Locate a safe mounting surface on the
windscreen, and clean the surface
thoroughly with a glass cleaner and a
clean towel. If the ambient
temperature is below +15°C (60°F),
carefully warm the surface and the
suction cup with a hair dryer to ensure
a firm grip on the windscreen. Ensure
that you do not heat the windscreen
excessively to avoid damage to it.
Press the suction cup at the bottom of
the mounting device firmly on the
windscreen (see step 1 at the start of
this guide), and carefully push the
locking lever inside the mounting
device (2) towards the suction cup to
create a vacuum between the suction
cup and the windscreen. Check that
the suction cup is firmly attached.
To detach the mounting device from
the windscreen, carefully push the
ENGLISH
locking lever toward the top of the
mounting device (3), and pull the
strap located on the edge of the
suction cup (4).
Set to the desired position
Do not adjust the mounting device
while driving.
To set the top of the mounting device
to the desired position, loosen the two
screws in the middle of the mounting
device, turn the top to the desired
position, and tighten the screws (5).
Ensure that the top of the device is
firmly locked into place.
To set the mounting plate at the top of
the mounting device to the desired
position, loosen the screw below the
plate, turn the plate to the desired
position, and tighten the screw (6).
Mount the mobile holder
To attach a compatible Nokia mobile
holder to the mounting plate, use the
screw supplied with the holder.
To use the CR-96 mobile holder,
remove the protection plate with the
Nokia text from the holder, attach the
holder to the mounting plate with the
supplied screw, and replace the
protection plate (7). To insert your
mobile device into the holder, slide it
into the holder from the top (8). To
remove the device, push the catch at
the top of the holder (9), and pull the
device out (10).
When attaching a mobile holder,
ensure that the display of the mobile
ENGLISH
device is clearly visible for the user.
For your safety, install the holder in
the upright position.
Care and maintenance
Your device is a product of superior
design and craftsmanship and should be
treated with care. The following
suggestions will help you protect your
warranty coverage.
• Do not use or store the device in
dusty, dirty areas. Its moving parts
can be damaged.
• Do not drop, knock, or shake the
device. Rough handling can break fine
mechanics.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device.
• Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
If the product is not working properly,
take it to the nearest authorised service
facility for service.
Soporte de Fácil Montaje Nokia
HH-12 y Soporte Móvil Nokia CR-96
9206398/2
5
6
7
89
10
ESPAÑOL
© 2007 Nokia. Todos los derechos reservados. Nokia y Nokia Connecting People son marcas
registradas de Nokia Corporation.
Introducción
El Soporte de Fácil Montaje Nokia
HH-12 es un dispositivo de montaje
que le permite instalar su soporte
móvil Nokia compatible en el
parabrisas de su vehículo.
Para usar el dispositivo de montaje
con su soporte móvil compatible,
instale el dispositivo de montaje en el
parabrisas, ajústelo en la posición
deseada y coloque el soporte móvil en
el dispositivo de montaje.
Mantenga todos los accesorios fuera
del alcance de los niños.
Instrucciones generales de seguridad
Obedezca todas las leyes locales.
Mantenga siempre las manos libres
para maniobrar el vehículo mientras
conduce. Su prioridad cuando
conduce debe ser la seguridad vial.
Sólo utilice el dispositivo de montaje o
el soporte móvil si es seguro bajo
todas las condiciones de conducción.
Al instalar el dispositivo de montaje o
el soporte móvil, asegúrese de que no
interfieran ni entorpezcan los
sistemas de dirección, frenos u otros
sistemas que se utilicen en la
operación del vehículo (por ejemplo,
bolsas de aire) y que tampoco
obstaculicen su campo de visión
durante la conducción.
ESPAÑOL
Asegúrese de no bloquear ni
obstaculizar de forma alguna el
despliegue de las bolsas de aire.
Asegúrese de que el dispositivo de
montaje o el soporte móvil no estén
instalados en un lugar en que usted
podría entrar en contacto con ellos en
caso de sufrir un accidente o colisión.
Verifique periódicamente que la goma
de succión ubicada en la parte inferior
del dispositivo de montaje esté
firmemente instalada en el parabrisas,
principalmente si la temperatura
ambiente es propensa a sufrir cambios
frecuentes.
Nunca deje el dispositivo de montaje
dentro del vehículo expuesto a la luz
solar directa o al calor excesivo. Si la
temperatura interior supera los
70°C (160°F), el dispositivo de
montaje y la goma de succión pueden
sufrir daños que pueden impedir la
adhesión.
Instale en el parabrisas
Ubique una superficie de montaje
segura en el parabrisas y límpiela a
fondo con limpiavidrios y una toalla
limpia. Si la temperatura ambiente es
inferior a +15°C (60°F), caliente
cuidadosamente la superficie y la
goma de succión con un secador para
el cabello para asegurarse de que se
adhiera firmemente al parabrisas.
Asegúrese de no calentar
excesivamente el parabrisas para
evitar dañarlo.
Presione firmemente contra el
parabrisas la goma de succión que se
encuentra en la parte inferior del
dispositivo de montaje (consulte el
Autres manuels pour HH-12
4
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Nokia Accessoires pour téléphone
