Nokia BH-606 Manuel utilisateur

Nokia Bluetooth Headset BH-606

Issue 1.1

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares

that this HS-128W product is in

compliance with the essential

requirements and other relevant

provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity

can be found at http://www.nokia.com/

phones/declaration_of_conformity/.

Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are

trademarks or registered trademarks of

Nokia Corporation. Other product and

company names mentioned herein may

be trademarks or tradenames of their

respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in

this document in any form without the

prior written permission of Nokia is

prohibited.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Nokia operates a policy of ongoing

development. Nokia reserves the right to

make changes and improvements to any

of the products described in this

document without prior notice.

To the maximum extent permitted by

applicable law, under no circumstances

shall Nokia or any of its licensors be

responsible for any loss of data or

income or any special, incidental,

consequential or indirect damages

howsoever caused.

The contents of this document are

provided "as is". Except as required by

applicable law, no warranties of any

kind, either express or implied,

including, but not limited to, the implied

warranties of merchantability and

fitness for a particular purpose, are

made in relation to the accuracy,

reliability or contents of this document.

Nokia reserves the right to revise this

document or withdraw it at any time

without prior notice.

The availability of particular products

may vary by region. Please check with

your Nokia dealer for details.

Export controls

This device may contain commodities,

technology or software subject to export

laws and regulations from the US and

other countries. Diversion contrary to

law is prohibited.

Introduction

With the Nokia Bluetooth Headset

BH-606, you can make and receive

calls while on the move.

Read this user guide carefully

before using the headset. Also,

read the user guide for your phone.

This product may contain small

parts. Keep them out of the reach

of small children.

Bluetooth wireless

technology

Bluetooth wireless technology

allows you to connect compatible

devices without cables. The phone

and the headset do not need to be

in line of sight, but they should be

within 10 metres (33 feet) of each

other. Connections may be subject

to interference from obstructions,

such as walls, or other electronic

devices.

The headset is compliant with the

Bluetooth Specification 2.0 + EDR

supporting the Headset Profile 1.1

and Hands-Free Profile 1.5. Check

with the manufacturers of other

devices to determine their

compatibility with this device.

Get started

The headset contains the

following parts shown on the title

page: white indicator light (1),

earloop (2), volume key (3), power

key (4), answer/end key (5),

earpiece (6), charger connector

(7), and microphone (8).

Before using the headset, you

must charge the battery and pair

the headset with a compatible

phone.

Parts of the device are magnetic.

Metallic materials may be

attracted to the device. Do not

place credit cards or other

magnetic storage media near the

device, because information

stored on them may be erased.

Charge the battery

Before charging the battery,

carefully read “Battery and

charger information”.

Warning: Use only

chargers approved by

Nokia for use with this

particular model. The use

of any other types may

invalidate any approval or

warranty, and may be

dangerous.

When you disconnect the power

cord of any accessory, grasp and

pull the plug, not the cord.

1. Connect the charger to a wall

outlet.

2. Connect the charger cable to

the charger connector. During

charging, the indicator light is

on and the headset cannot be

used. Charging the battery fully

may take up to 2 hours.

3. When the battery is fully

charged, the indicator light

turns off. Disconnect the

charger from the headset, then

from the wall outlet.

If the headset was connected

to your phone before charging,

the headset connects to it

again.

The fully charged battery has

power for up to 8 hours of talk

time or up to 280 hours of standby

time.

When the battery is discharged,

the headset beeps every minute

and the indicator light flashes

quickly.

Switch on or off

To switch on, press and hold the

power key for about 2 seconds. The

headset beeps, and the indicator

light is displayed. The headset tries

to connect to a paired phone.

To switch off, press and hold the

power key for about 2 seconds. The

headset beeps, and the indicator

light turns off.

Pair the headset

1. Ensure that your phone is on

and the headset is off.

2. Press and hold the power key

(for about 5 seconds) until the

indicator light starts to flash

quickly.

3. Activate the Bluetooth feature

on the phone, and set it to

search for Bluetooth devices.

4. Select the headset from the list

of found devices.

5. Enter the passcode 0000 to

pair and connect the headset to

your phone. In some phones,

you may need to make the

connection separately after

pairing.

When the headset is connected to

your phone and is ready for use,

the indicator light flashes about

every 5 seconds.

Basic use

Place the headset on the ear

Slide the earloop behind your ear,

and point the headset toward your

mouth (9 and 10). Gently push the

earpiece into your ear. To use the

headset on the left ear, detach the

earloop (11), flip it, and push it

into place (12).

Calls

To make a call, use your phone in

the normal way when the headset

is connected to it.

To redial the number you last

called (if your phone supports this

feature with the headset), when

no call is in progress, press the

answer/end key twice.

To activate voice dialling (if your

phone supports this feature with

the headset), when no call is in

progress, press and hold the

answer/end key for about 2

seconds. Proceed as described in

the phone user guide.

To answer or end a call, press the

answer/end key. To reject a call,

press this key twice.

To set the headset volume, slide

the volume key up or down.

To mute or unmute the

microphone during a call, press

the middle of the volume key.

To switch a call between the

headset and a compatible phone,

press and hold the answer/end key

(or the power key) for about 2

seconds.

Handle two calls

To answer a waiting call and put

the active call on hold, press and

hold the answer/end key for about

2 seconds.

To answer a waiting call and end

the active call, press the answer/

end key.

To end the active call and activate

the call on hold, press the answer/

end key.

To switch between the active call

and the call on hold, press and

hold the answer/end key for about

2 seconds.

To use these features, your phone

must support the Bluetooth

Hands-Free profile 1.5, and call

waiting (network service) must be

activated in the phone.

Clear settings or reset

To delete the pairings from the

headset, switch off the headset,

and press and hold the power key

and the answer/end key for about

5 seconds.

To reset the headset if it stops

functioning, even though it is

charged, connect the headset to a

charger that is connected to a wall

outlet.

Troubleshooting

If you cannot connect the headset

to your compatible phone, check

that the headset is charged,

switched on, and paired with the

phone.

Battery and charger information

This device has an internal,

nonremovable, rechargeable battery.

Do not attempt to remove the battery

from the device as you may damage

the device. This device is intended for

use when supplied with power from

the following chargers: AC-3, AC-4,

AC-5, and DC-4. The exact charger

model number may vary depending

on the type of plug. The plug variant

is identified by one of the following:

E, EB, X, AR, U, A, C, or UB. The battery

can be charged and discharged

hundreds of times, but it will

eventually wear out. Recharge your

battery only with Nokia approved

chargers designated for this device.

Use of an unapproved charger may

present a risk of fire, explosion,

leakage, or other hazard.

If a battery is being used for the first

time or if the battery has not been

used for a prolonged period, it may be

necessary to connect the charger,

then disconnect and reconnect it to

begin charging the battery. If the

battery is completely discharged, it

may take several minutes before the

charging indicator light is displayed.

Unplug the charger from the

electrical plug and the device when

not in use. Do not leave a fully

charged battery connected to a

charger, since overcharging may

shorten its lifetime. If left unused, a

fully charged battery will lose its

charge over time.

Always try to keep the battery

between 15°C and 25°C (59°F and

77°F). Extreme temperatures reduce

the capacity and lifetime of the

battery. A device with a hot or cold

battery may not work temporarily.

Battery performance is particularly

limited in temperatures well below

freezing.

Do not dispose of batteries in a fire as

they may explode. Batteries may also

explode if damaged.

Never use any charger that is

damaged.

Important: Battery talk

and standby times are

estimates only and

depend on network

conditions, features used,

battery age and

condition, temperatures

to which battery is

exposed, and many other

factors. The amount of

time a device is used for

calls will affect its

standby time. Likewise,

the amount of time that

the device is turned on

and in the standby mode

will affect its talk time.

Care and maintenance

Your device is a product of superior

design and craftsmanship and should

be treated with care. The following

suggestions will help you protect

your warranty coverage.

• Keep the device dry. Precipitation,

humidity, and all types of liquids

or moisture can contain minerals

that will corrode electronic

circuits. If your device does get

wet, allow it to dry completely.

• Do not use or store the device in

dusty, dirty areas. Its moving parts

and electronic components can

be damaged.

• Do not store the device in hot

areas. High temperatures can

shorten the life of electronic

devices, damage batteries, and

warp or melt certain plastics.

• Do not store the device in cold

areas. When the device returns to

its normal temperature, moisture

can form inside the device and

damage electronic circuit boards.

• Do not attempt to open the

device.

• Do not drop, knock, or shake the

device. Rough handling can break

internal circuit boards and fine

mechanics.

• Do not use harsh chemicals,

cleaning solvents, or strong

detergents to clean the device.

• Do not paint the device. Paint can

clog the moving parts and prevent

proper operation.

These suggestions apply equally to

your device, charger, or any

accessory. If any device is not

working properly, take it to the

nearest authorised service facility for

service.

Autres manuels pour BH-606

Table des matières

Autres manuels Nokia casque

Nokia

Nokia BH 300 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia HS 26W - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH-214 Manuel de service

Nokia

Nokia 02705Q5 Manuel utilisateur

Nokia

Nokia HS-39W Manuel utilisateur

Nokia

Nokia BH 212 - Headset - Over-the-ear Dimensions

Nokia

Nokia BH-801 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia BH 604 - Headset - Binaural Manuel utilisateur

Nokia

Nokia BH-803 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia HS-123W Manuel utilisateur

Nokia

Nokia BH-702 Manuel utilisateur

Nokia

Nokia BH-606 Manuel utilisateur

Nokia

Nokia BH-800 Manuel utilisateur

Nokia

Nokia HDW 2 Manuel utilisateur

Nokia

Nokia BH-215 Manuel utilisateur

Nokia

Nokia BH-111 Manuel utilisateur

Nokia

Nokia Comm Band Pro Manuel utilisateur

Nokia

Nokia BH-217 Manuel utilisateur

Nokia

Nokia HS-2R - Personal Radio Manuel utilisateur

Nokia

Nokia HDW 3 - Headset - Over-the-ear Manuel utilisateur

Nokia

Nokia HDE-2 - Headset - Ear-bud Manuel utilisateur

Nokia

Nokia BH-900 Manuel utilisateur

Nokia

Nokia BH-218 Manuel utilisateur

Nokia

Nokia BH 212 - Headset - Over-the-ear Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur