Nokia RM-1040 Manuel utilisateur
Quick Guide
123123 Issue 1 EN RM-1040
Psst...
This guide isn't all there is...
There's a user guide in your phone – it's always with you,
available when needed. Check out videos, find answers to
your questions, and get helpful tips. Tap Lumia Help
+Tips. If you’re new to Windows Phone, check out the
section for new Windows Phone users.
For the online user guidance, even more info, and
troubleshooting help, go to www.nokia.com/support.
Check out the support videos at www.youtube.com/
NokiaSupportVideos.
For info on Microsoft Mobile Service terms and Privacy
policy, go to www.nokia.com/privacy.
First start-up
Your new phone comes with great features that are
installed when you start your phone for the first time.
Allow some minutes while your phone sets up.
2
For your safety
We invite you to read the instructions on this guide before
using the device.
SWITCH OFF IN RESTRICTED AREAS
Switch the device off when mobile phone use is
not allowed or when it may cause interference
or danger, for example, in aircraft, in hospitals
or near medical equipment, fuel, chemicals, or blasting
areas. Obey all instructions in restricted areas.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free
to operate the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect performance.
QUALIFIED SERVICE
Only qualified personnel may install or repair
this product.
BATTERIES, CHARGERS, AND OTHER
ACCESSORIES
Use only batteries, chargers, and other
accessories approved by Microsoft Mobile for
use with this device. Third-party chargers that
comply with the IEC/EN 62684 standard, and that can
connect to your device micro USB connector, may be
compatible. Do not connect incompatible products.
KEEP YOUR DEVICE DRY
Your device is not water-resistant. Keep it dry.
GLASS PARTS
The device screen is made of glass. This glass
can break if the device is dropped on a hard
surface or receives a substantial impact. If the
glass breaks, do not touch the glass parts of the device or
4
attempt to remove the broken glass from the device. Stop
using the device until the glass is replaced by qualified
service personnel.
PROTECT YOUR HEARING
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
Exercise caution when holding your device near
your ear while the loudspeaker is in use.
SAR
This device meets RF exposure guidelines when
used either in the normal use position against
the ear or when positioned at least 1.5
centimetres (5/8 inch) away from the body. The
specific maximum SAR values can be found in the
Certification Information (SAR) section of this user guide.
For more info, go to www.sar-tick.com.
When a carry case, belt clip or other form of device holder
is used for body-worn operation, it should not contain
metal and should provide at least the above-stated
separation distance from the body. Note that mobile
devices may be transmitting even if you are not making a
voice call.
5
Keys and parts
1Earpiece
2 Audio connector AHJ 3.5 mm
3 Light sensor
4 Front camera
5Volumekeys
6 Power/Lock key
7Microphone
8 Antenna area
9Flash
10 Camera
11 NFC area
12 Loudspeaker
13 Micro-USB connector
14 Microphone
Some of the accessories mentioned in this user
guide, such as charger, headset, or data cable,
may be sold separately.
Avoid touching the antenna area while the
antenna is in use. Contact with antennas affects
the communication quality and may reduce
battery life due to higher power level during
operation.
6
7
Get started
Before you start using your phone, remove the
back cover to insert the micro-SIM cards (also
known as mini-UICC cards).
Remove the back cover
Make sure the phone is switched off.
With the back of the phone facing you, place your
thumb on the back of the phone next to the
camera lens, and bend the cover open. Do not use
any sharp tools, as they may damage the phone.
8
Insert the SIM and memory card
1. If the battery is in, lift it out.
2. Slide the micro-SIM card (SIM1) into the SIM slot
with the metal contact area down.
3. If you have a second SIM card, push it into the
SIM2 slot, until it locks into place.
4. If you have a memory card, slide the card into
the memory card slot.
It is recommended that you use a fast microSD
card from a well-known manufacturer.
Important: Your device uses a micro-SIM card,
also known as a mini-UICC SIM card. Use of
incompatible SIM cards, or use of SIM card
adapters, may damage the card or the device, and
may corrupt data stored on the card.
9
Replace the battery and back cover
1. Line up the battery contacts, and put the
battery in.
2. Press the bottom edge of the back cover
against the bottom edge of your phone.
3. Snap the cover into place.
4. To switch your phone on, press and hold the
power key.
Charge the battery
Plug a compatible charger into a wall outlet, and
connect the micro-USB end to your phone. You
can also charge your phone from a computer with
a USB cable.
If the battery is completely discharged, it may
take up to 20 minutes before the charging
indicator is displayed.
10
Table des matières
Autres manuels Nokia Téléphone portable
Nokia
Nokia 5235 Manuel utilisateur
Nokia
Nokia DIGITAL MULTIMEDIA TERMINAL Manuel utilisateur
Nokia
Nokia 1600 - Cell Phone 4 MB Manuel utilisateur
Nokia
Nokia E52 Manuel utilisateur
Nokia
Nokia 6061 - Cell Phone 3 MB Manuel utilisateur
Nokia
Nokia 9300i Manuel utilisateur
Nokia
Nokia 5140 Manuel utilisateur
Nokia
Nokia 215 4G Manuel utilisateur
Nokia
Nokia Lumia 820 Manuel utilisateur
Nokia
Nokia 1800 Manuel utilisateur
Nokia
Nokia 6560 Manuel utilisateur
Nokia
Nokia 7370 - Cell Phone 10 MB Manuel utilisateur
Nokia
Nokia N 80 Manuel utilisateur
Nokia
Nokia 1110 Manuel utilisateur
Nokia
Nokia NOKIA N93i-1 Manuel utilisateur
Nokia
Nokia Asha 200 Manuel utilisateur
Nokia
Nokia Lumia 830 Manuel utilisateur
Nokia
Nokia 3720 classic Guide de démarrage rapide
Nokia
Nokia Asha 205 Manuel utilisateur
Nokia
Nokia 2.1 Manuel utilisateur
